Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Joint-Transceiver Equalization Technique over a 1.4 km Multi-Mode Fiber Using Optical MIMO Technique in IM/DD Systems

View through CrossRef
In optical fiber communication, recent advances in multiple-input and multiple-output (MIMO) systems using space-division multiplexing have helped achieve higher spectral efficiency and data rates. Propagating higher-order modulation formats over MIMO systems further strengthens the capacity of the transmission link. In the optical-MIMO system, the dispersion impairments originating from a 1.4 km long multi-mode fiber (MMF) are mitigated using the proposed joint-transceiver equalization technique. A numerical convex optimization algorithm is used to compute and optimize the pre- and post-equalization (PPE) coefficients jointly restricted by cost and power budgets. The potential of the proposed joint-PPE technique is tested on an MMF link, which is severely degraded by dispersion compared to a single-mode fiber channel. From the experimental results, the average optical received power gain necessary to reach 10−4 bit-error rate is improved by nearly 2.5 dB using the joint-PPE compared to the post-equalization only based on the minimum mean-squared error principle. When the efficiency of the conventional zero-forcing (ZF) principle-based PPE and the joint-PPE is compared, the joint-PPE scheme outperforms the ZF-PPE by approximately 1.5 dB. The enhancement in the transmission quality is observed with experimentally measured eye diagrams using the joint-PPE scheme. Under the analyzed scenarios, computer simulation also confirms the hypothesis, which establishes the effectiveness of the proposed joint-transceiver equalization over the conventional ZF-PPE scheme. Moreover, the simulated performance benefits of the joint-PPE are evaluated using the singular value decomposition (SVD) technique. Improvement of ≈3.86 dB in the average optical received power gain required to reach 10−4 bit-error rate is witnessed with the PAM-4 format. Overall, the joint-transceiver equalization technique is proven to be beneficial in optical MIMO systems.
Title: Joint-Transceiver Equalization Technique over a 1.4 km Multi-Mode Fiber Using Optical MIMO Technique in IM/DD Systems
Description:
In optical fiber communication, recent advances in multiple-input and multiple-output (MIMO) systems using space-division multiplexing have helped achieve higher spectral efficiency and data rates.
Propagating higher-order modulation formats over MIMO systems further strengthens the capacity of the transmission link.
In the optical-MIMO system, the dispersion impairments originating from a 1.
4 km long multi-mode fiber (MMF) are mitigated using the proposed joint-transceiver equalization technique.
A numerical convex optimization algorithm is used to compute and optimize the pre- and post-equalization (PPE) coefficients jointly restricted by cost and power budgets.
The potential of the proposed joint-PPE technique is tested on an MMF link, which is severely degraded by dispersion compared to a single-mode fiber channel.
From the experimental results, the average optical received power gain necessary to reach 10−4 bit-error rate is improved by nearly 2.
5 dB using the joint-PPE compared to the post-equalization only based on the minimum mean-squared error principle.
When the efficiency of the conventional zero-forcing (ZF) principle-based PPE and the joint-PPE is compared, the joint-PPE scheme outperforms the ZF-PPE by approximately 1.
5 dB.
The enhancement in the transmission quality is observed with experimentally measured eye diagrams using the joint-PPE scheme.
Under the analyzed scenarios, computer simulation also confirms the hypothesis, which establishes the effectiveness of the proposed joint-transceiver equalization over the conventional ZF-PPE scheme.
Moreover, the simulated performance benefits of the joint-PPE are evaluated using the singular value decomposition (SVD) technique.
Improvement of ≈3.
86 dB in the average optical received power gain required to reach 10−4 bit-error rate is witnessed with the PAM-4 format.
Overall, the joint-transceiver equalization technique is proven to be beneficial in optical MIMO systems.

Related Results

Non-Dissipative Equalization Method with SOC-Difference Based on Fuzzy Logic Control for Lithium-Ion Battery
Non-Dissipative Equalization Method with SOC-Difference Based on Fuzzy Logic Control for Lithium-Ion Battery
A non-dissipative equalization method is proposed to reduce the inconsistency of series-connected Lithium-ion batteries. The proposed battery equalization method mainly consists of...
Demodulation and multi-input multi-output equalization for mode division multiplexing system using a novel few-mode fiber
Demodulation and multi-input multi-output equalization for mode division multiplexing system using a novel few-mode fiber
In order to solve the mode crosstalk in a mode division multiplexing (MDM) transmission system, we design and fabricate a novel few-mode fiber (FMF) with high mode differential gro...
Matched Filtering in Massive MU-MIMO Systems
Matched Filtering in Massive MU-MIMO Systems
<p>This thesis considers the analysis of matched filtering (MF) processing in massive multi-user multiple-input-multiple-output (MU-MIMO) wireless communication systems. The ...
Spatial modulation schemes and modem architectures for millimeter wave radio systems
Spatial modulation schemes and modem architectures for millimeter wave radio systems
The rapid growth of wireless industry opens the door to several use cases such as internet of things and device-to-device communications, which require boosting the reliability and...
Enhancing Multi-User Wireless Networks with Pattern Reconfigurable Antennas
Enhancing Multi-User Wireless Networks with Pattern Reconfigurable Antennas
The explosive demand for high data rates and the need ubiquitous wireless connectivity has led to the phenomenon of network densification, the deployment of large number of base st...
Computational Electromagnetics for Efficient Control Design of Massive MIMO and Beyond
Computational Electromagnetics for Efficient Control Design of Massive MIMO and Beyond
As Multiple Inputs Multiple Outputs (MIMO) is becoming one of the enable techniques in modern wireless communication like 5G/6G and beyond, it is important to design efficient cont...
Coherent and non-coherent data detection algorithms in massive MIMO
Coherent and non-coherent data detection algorithms in massive MIMO
<p>Over the past few years there has been an extensive growth in data traffic consumption devices. Billions of mobile data devices are connected to the global wireless networ...
Blind identification of possibly under-determined convolutive MIMO systems
Blind identification of possibly under-determined convolutive MIMO systems
Blind identification of a Linear Time Invariant (LTI) Multiple-Input Multiple-Output (MIMO) system is of great importance in many applications, such as speech processing, multi-acc...

Back to Top