Javascript must be enabled to continue!
Numerical study of fluid flow through double bell‐shaped constrictions in a tube
View through CrossRef
The effects of steady fluid flow through double bell‐shaped constrictions in tubes were investigated numerically for the Reynolds number range of 5 to 400. The double constrictions studied were for similar first and second constrictions of 1/3, 1/2 and 2/3. A dimensionless constriction spacing of 1.0 was considered. Study showed that the major part of the mean dimensionless pressure drop in the constricted tube occurs predominantly across the first constriction when flow moves towards the valley region formed by the two constrictions. Minimum pressures along the constricted tubes occurs downstream of each constrictions. When the constriction magnitudes increased, the pressure drop across the same length of the tube increases exponentially. The effect of increasing the Reynolds number for all the constriction values considered here is to increase the spreading of the recirculation region between the valley region of the constrictions. The recirculation region formed between the two constrictions has a deminishing effect on the generation of wall vorticity near the second constriction. The effects are more pronounce when the recirculatory flow from the first constriction has spread over the second constriction. In general, a peak wall vorticity is found slightly upstream of each of the constrictions. When the Reynolds number is increased, the peak wall vorticity increases and its location moved upstream. It is noted for the cases considered here that the peak wall vorticity generated by the first constriction is always greater than the peak wall vorticity generated by the second constriction.
Title: Numerical study of fluid flow through double bell‐shaped constrictions in a tube
Description:
The effects of steady fluid flow through double bell‐shaped constrictions in tubes were investigated numerically for the Reynolds number range of 5 to 400.
The double constrictions studied were for similar first and second constrictions of 1/3, 1/2 and 2/3.
A dimensionless constriction spacing of 1.
0 was considered.
Study showed that the major part of the mean dimensionless pressure drop in the constricted tube occurs predominantly across the first constriction when flow moves towards the valley region formed by the two constrictions.
Minimum pressures along the constricted tubes occurs downstream of each constrictions.
When the constriction magnitudes increased, the pressure drop across the same length of the tube increases exponentially.
The effect of increasing the Reynolds number for all the constriction values considered here is to increase the spreading of the recirculation region between the valley region of the constrictions.
The recirculation region formed between the two constrictions has a deminishing effect on the generation of wall vorticity near the second constriction.
The effects are more pronounce when the recirculatory flow from the first constriction has spread over the second constriction.
In general, a peak wall vorticity is found slightly upstream of each of the constrictions.
When the Reynolds number is increased, the peak wall vorticity increases and its location moved upstream.
It is noted for the cases considered here that the peak wall vorticity generated by the first constriction is always greater than the peak wall vorticity generated by the second constriction.
Related Results
Blunt Chest Trauma and Chylothorax: A Systematic Review
Blunt Chest Trauma and Chylothorax: A Systematic Review
Abstract
Introduction: Although traumatic chylothorax is predominantly associated with penetrating injuries, instances following blunt trauma, as a rare and challenging condition, ...
Bell inequalities for device-independent protocols
Bell inequalities for device-independent protocols
The technological era that we live in is sometimes described as the Information Age. Colossal amounts of data are generated every day and considerable effort is put into creating t...
Experimental Investigation of Permeability and Fluid Loss Properties of Water Based Mud Under High Pressure-High Temperature Conditions
Experimental Investigation of Permeability and Fluid Loss Properties of Water Based Mud Under High Pressure-High Temperature Conditions
Drilling in deeper formations and in high pressure and high temperature (HPHT) environments is a new frontier for the oil industry. Fifty years ago, no one would have imagined dril...
Tube Shunt Related Complications in Pediatrics
Tube Shunt Related Complications in Pediatrics
Although medical therapy is usually an excellent therapeutic option in the adult population, in children it is often ineffective or associated with an undesirable risk:benefit rati...
Analysis of Swirl Flow by Tube Inserts for CFD Study
Analysis of Swirl Flow by Tube Inserts for CFD Study
The petroleum and petrochemical industries continually seek mechanical methods to improve heat transfer in shell-and-tube heat exchangers. Tube bundle inserts are popular mechanica...
Modification of a Radial Pump Characteristics With Fluid Suction in the Vaneless Space
Modification of a Radial Pump Characteristics With Fluid Suction in the Vaneless Space
Abstract
Flow instability is a common unsteady phenomenon in the field of turbomachinery that often causes large pressure fluctuations, performance penalties, and st...
Effect of Die Velocity on Tube Deformation Mechanics During Low Pressure Tube Hydroforming Process Sequence Variation
Effect of Die Velocity on Tube Deformation Mechanics During Low Pressure Tube Hydroforming Process Sequence Variation
Abstract
Tube hydroforming is one of the successful manufacturing processes to create a variety of shapes using fluid pressure. The process fills the tube with fluid...
Underground Blowouts In Deep Well Drilling
Underground Blowouts In Deep Well Drilling
ABSTRACT
A kick occurs when the wellbore pressure becomes less than the formation pressure, and formation fluid enters the wellbore. When the flow of formation fl...

