Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Gravity data reduction, Bouguer anomaly, and gravity disturbance

View through CrossRef
Each point on the earth has a gravity and gravity potential value. Surfaces formed by connecting points with equal gravity potential values are called equipotential surfaces or level surfaces. Determination of gravity field of the earth and the geoid which is one of the earth’s equipotential surfaces is very important for physical geodesy. Gravity values measured on the physical earth are not directly included in studies; firstly, they must be converted into gravity anomalies. For this, in this study precise leveling, gravity and GPS measurements were made in the field. Heights (H) with precise leveling measurements, gravity values (g) with gravity measurements and geographical latitudes (j) with GPS measurements were recorded. Then, gravity reductions (free-air, Bouguer) were calculated at the points. The actual gravity g measured on Earth is not immediately directly comparable to the normal gravity of the ellipsoid surface. Gravity values must be reduced to the geoid. Since there are masses outside the geoid, reduction methods differ according to the way these topographic masses are handled. Bouguer gravity anomalies and gravity disturbances are derived. The gravity anomaly (Dg) is defined as the scalar difference between the Earth’s gravity on the geoid and normal gravity on the surface of the reference ellipsoid.  Gravity disturbance (dg) is defined as the difference between the actual gravity magnitude measured on Earth and its equivalent normal gravity in the normal gravity field for the same point. The changes and magnitudes of the calculated quantities are compared. Changes such as the observed gravity and height data, observed gravity changes versus calculated normal gravity changes, normal gravity on ellipsoid versus geographic latitude, observed gravity changes versus latitude changes, Bouguer gravity anomaly and gravity disturbance versus latitude and elevation, free-air reduction and Bouguer gravity reduction versus latitude and elevation have been investigated.
Institute of Geophysics of the National Academy of Sciences of Ukraine by S.I. Subbotin name
Title: Gravity data reduction, Bouguer anomaly, and gravity disturbance
Description:
Each point on the earth has a gravity and gravity potential value.
Surfaces formed by connecting points with equal gravity potential values are called equipotential surfaces or level surfaces.
Determination of gravity field of the earth and the geoid which is one of the earth’s equipotential surfaces is very important for physical geodesy.
Gravity values measured on the physical earth are not directly included in studies; firstly, they must be converted into gravity anomalies.
For this, in this study precise leveling, gravity and GPS measurements were made in the field.
Heights (H) with precise leveling measurements, gravity values (g) with gravity measurements and geographical latitudes (j) with GPS measurements were recorded.
Then, gravity reductions (free-air, Bouguer) were calculated at the points.
The actual gravity g measured on Earth is not immediately directly comparable to the normal gravity of the ellipsoid surface.
Gravity values must be reduced to the geoid.
Since there are masses outside the geoid, reduction methods differ according to the way these topographic masses are handled.
Bouguer gravity anomalies and gravity disturbances are derived.
The gravity anomaly (Dg) is defined as the scalar difference between the Earth’s gravity on the geoid and normal gravity on the surface of the reference ellipsoid.
  Gravity disturbance (dg) is defined as the difference between the actual gravity magnitude measured on Earth and its equivalent normal gravity in the normal gravity field for the same point.
The changes and magnitudes of the calculated quantities are compared.
Changes such as the observed gravity and height data, observed gravity changes versus calculated normal gravity changes, normal gravity on ellipsoid versus geographic latitude, observed gravity changes versus latitude changes, Bouguer gravity anomaly and gravity disturbance versus latitude and elevation, free-air reduction and Bouguer gravity reduction versus latitude and elevation have been investigated.

Related Results

ANALYSIS OF GRAVITY DATA NEAR CONTINENTAL MARGINS
ANALYSIS OF GRAVITY DATA NEAR CONTINENTAL MARGINS
In general large, thick sedimentary basins are delineated by negative gravity features. The gravity data are usually expressed in the form of Bouguer anomaly contours.Ordinary Boug...
NON-STANDARD GRAVITY ANOMALIES OVER SEDIMENTARY STRUCTURES
NON-STANDARD GRAVITY ANOMALIES OVER SEDIMENTARY STRUCTURES
Calculations of the gravity effect of sedimentary structures can now be easily and rapidly made using digital computers. When density variations are normal, they generate gravity p...
Successive Regression to Determine the Optimum Terrain Correction Density in Mountainous Areas
Successive Regression to Determine the Optimum Terrain Correction Density in Mountainous Areas
Bouguer gravity anomalies are generally correlated with topography in mountainous regions. However, their applicability in geological interpretations of gravity data is often const...
Using spherical scaling functions in scalar and vector airborne gravimetry
Using spherical scaling functions in scalar and vector airborne gravimetry
<p>Airborne gravimetry is capable to provide Earth’s gravity data of high accuracy and spatial resolution for any area of interest, in particular for ha...
Unraveling the Geothermal Potential of Corbetti Caldera using Integrated Geophysical Methods, Central Main Ethiopian Rift
Unraveling the Geothermal Potential of Corbetti Caldera using Integrated Geophysical Methods, Central Main Ethiopian Rift
Abstract In this paper integrated geophysical techniques, involving electrical resistivity, gravity and magnetic surveys have been carried out over the Corbetti Caldera in ...
Utilizing Gravity Surveys for Subsurface Feature Identification in Foundation Planning
Utilizing Gravity Surveys for Subsurface Feature Identification in Foundation Planning
Understanding the distribution and extent of solution features such as cavities and pinnacles in limestone bedrock is crucial for anticipating potential challenges and planning app...
SynthGen: A Gravitational Simulator For Planetary Interior Modelling  
SynthGen: A Gravitational Simulator For Planetary Interior Modelling  
Determining the internal structure of planetary bodies from gravitational observations is a key challenge in planetary geophysics. Gravity inversion techniques make it possible to ...
Gravity Studies at Cerro Machín Volcano, Colombia
Gravity Studies at Cerro Machín Volcano, Colombia
A gravimetric study was performed at the Cerro Machin volcano (4° 29’ N, 75° 22’ W), Tolima Department, Colombia,  to obtain a density distribution of the volcanic edifice and its ...

Back to Top