Javascript must be enabled to continue!
Switchable single and dual-wavelength single longitudinal mode Pr:YLF laser at 607nm and 604nm
View through CrossRef
Abstract
This letter presents a orthogonally polarized dual-wavelength single-longitudinal-mode Pr:YLF laser output at 607 nm and 604 nm by using combine F-P etalons. The experimental results shows that switchable single and dual-wavelength single-longitudinal mode laser output can be realized by selectively combining the F-P etalons with 0.3 mm and 1mm thickness. We obtained the maximum orthogonally polarized dual-wavelength single longitudinal mode laser output power at 604 nm and 607 nm is reaches 32 mW and the measured dual-wavelength single longitudinal mode laser spectral line-widths are 174.4 MHz and 102.2 MHz. The maximum single wavelength single longitudinal mode laser output at 607 nm and 604 nm are 201 mW and 81 mW and the measured single wavelength single longitudinal mode laser spectral line-widths are 52.3 MHz and 111.3 MHz, respectively. To the best of our knowledge, it is the first time to investigate the orthogonally polarized dual-wavelength single longitudinal mode CW Pr:YLF laser.
Title: Switchable single and dual-wavelength single longitudinal mode Pr:YLF laser at 607nm and 604nm
Description:
Abstract
This letter presents a orthogonally polarized dual-wavelength single-longitudinal-mode Pr:YLF laser output at 607 nm and 604 nm by using combine F-P etalons.
The experimental results shows that switchable single and dual-wavelength single-longitudinal mode laser output can be realized by selectively combining the F-P etalons with 0.
3 mm and 1mm thickness.
We obtained the maximum orthogonally polarized dual-wavelength single longitudinal mode laser output power at 604 nm and 607 nm is reaches 32 mW and the measured dual-wavelength single longitudinal mode laser spectral line-widths are 174.
4 MHz and 102.
2 MHz.
The maximum single wavelength single longitudinal mode laser output at 607 nm and 604 nm are 201 mW and 81 mW and the measured single wavelength single longitudinal mode laser spectral line-widths are 52.
3 MHz and 111.
3 MHz, respectively.
To the best of our knowledge, it is the first time to investigate the orthogonally polarized dual-wavelength single longitudinal mode CW Pr:YLF laser.
Related Results
Development of a high intensity Mid-Ir OPCPA pumped by a HO:YLF amplifier
Development of a high intensity Mid-Ir OPCPA pumped by a HO:YLF amplifier
The continuous development of laser sources delivering ultra-short light pulses underpins much of the current progress in experimental science, particularly in the domain of physic...
Study on the ASP Switchable Surfactant for Daqing Oilfield
Study on the ASP Switchable Surfactant for Daqing Oilfield
Abstract
During the past 20 years, alkali-surfactant-polymer (ASP) chemical combination flooding has become a successful EOR technique for the mature reservoirs with...
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
In recent years, more than 90% of the signal laser power can be up-converted based on the high-efficiency double resonant external cavity sum-frequency generation (SFG), especially...
Comparative study of near-infrared pulsed laser machining of carbon fiber reinforced plastics
Comparative study of near-infrared pulsed laser machining of carbon fiber reinforced plastics
<p>Carbon fiber-reinforced plastics (CFRPs) have gained widespread popularity as a lightweight, high-strength alternative to traditional materials. The unique anisotropic pro...
Excimer Laser Micromachining of MEMS Materials
Excimer Laser Micromachining of MEMS Materials
Conventional photolithography-based microfabrication techniques are limited to two-dimensional fabrication and only particular materials can be used. Excimer laser micromachining e...
Laser show safety for smaller shows: The ILDA category a laser show standard
Laser show safety for smaller shows: The ILDA category a laser show standard
The International Laser Display Association has developed a “Category A Standard” for laser shows that ILDA considers to be generally recognized as safe under the conditions of the...
Laser Cladded Surface Hardening Coating With Gradient of Mechanical Properties
Laser Cladded Surface Hardening Coating With Gradient of Mechanical Properties
The present dissertation “Laser Cladded Surface Hardening Coating with Gradient of Mechanical Properties” is devoted to the research of laser cladding process for obtaining high qu...
All-fiber passively mode-locked femtosecond fiber lasers
All-fiber passively mode-locked femtosecond fiber lasers
This dissertation presents three all-fiber designs of passively mode-locked lasers in order to achieve high pulse energy, environmentally-stable dissipative soliton (DS) operation ...

