Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Study of BGA Solder Joints Interfacial Failure Mechanism Related to Wave Soldering
View through CrossRef
ABSTRACT
A BGA solder joint open case was discussed. The BGA was on topside of the board and the bottom side component was assembled by wave soldering process. Failure analysis with Dye & Pry, Cross section, SEM/EDX showed that it was a typical interfacial brittle fracture of BGA package side. Sn-Ni-Cu ternary intermetallic compound (IMC) exposed at fracture of BGA substrate. Detail examination of the physical cause of this failure was presented in this paper. Several potential root causes including secondary reflow of the solder joints, ternary IMC were analyzed. Key Words: Interfacial failure, BGA, Wave Soldering
Surface Mount Technology Association
Title: Study of BGA Solder Joints Interfacial Failure Mechanism Related to Wave Soldering
Description:
ABSTRACT
A BGA solder joint open case was discussed.
The BGA was on topside of the board and the bottom side component was assembled by wave soldering process.
Failure analysis with Dye & Pry, Cross section, SEM/EDX showed that it was a typical interfacial brittle fracture of BGA package side.
Sn-Ni-Cu ternary intermetallic compound (IMC) exposed at fracture of BGA substrate.
Detail examination of the physical cause of this failure was presented in this paper.
Several potential root causes including secondary reflow of the solder joints, ternary IMC were analyzed.
Key Words: Interfacial failure, BGA, Wave Soldering.
Related Results
SJQ and SJR Study of SMT Soldering with Low Temperature Solder Paste
SJQ and SJR Study of SMT Soldering with Low Temperature Solder Paste
ABSTRACT
This paper is in English and Chinese languages.
The transition to Lead Free SnAgCu solders, has necessitated higher temperatures in ref...
Effect of alloy particle size and stencil aperture shape on solder printing quality
Effect of alloy particle size and stencil aperture shape on solder printing quality
Purpose
Reflow solder joint quality is significantly affected by the ability of the solder to perfectly fill pad space and retain good solder joint shape. This study aims to invest...
Today's Vapor Phase Soldering: an Optimized Reflow Technology for Lead Free Soldering
Today's Vapor Phase Soldering: an Optimized Reflow Technology for Lead Free Soldering
ABSTRACT
In the beginning of SMT, Vapor Phase Soldering was the preferred reflow soldering technology because of its excellent heat transfer capabilities. There w...
Combined Printed Solder Paste and Printed Adhesive Process for Devices Going through Wave Solder
Combined Printed Solder Paste and Printed Adhesive Process for Devices Going through Wave Solder
ABSTRACT
The secondary side devices assembled on boards along with through-hole components are usually mechanically secured to the secondary side using an adhesiv...
Fill the Void
Fill the Void
ABSTRACT
Voids in solder joints are a concern for many electronic manufacturers. They create weakness in the solder joints which can lead to mechanical failure. V...
Effect of Solder Particle Size on the Mechanical and Thermal Reliability of Au/Sn Ag Cu/Cu Solder Joints
Effect of Solder Particle Size on the Mechanical and Thermal Reliability of Au/Sn Ag Cu/Cu Solder Joints
This paper investigates the effect of solders with different grain sizes (5–15
μ
m, 2–15
μ
m, 2–11
...
Solderability of Coloured Lead Free Solder Composite
Solderability of Coloured Lead Free Solder Composite
Coloured solders offer wide range of possible application on top of conventional usage related to solder and soldering. Coloured solder can be produced by adding colour pigment int...
Dynamic Recrystallization of Sn3.0Ag0.5Cu Pb-Free Solder Alloy
Dynamic Recrystallization of Sn3.0Ag0.5Cu Pb-Free Solder Alloy
This study examines microstructural recrystallization in Sn3.0Ag0.5Cu (SAC305) solder joints due to isothermal, mechanical cycling. It is well known that after reflow SAC solder jo...