Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Lead-Free Piezoelectric Ceramics of (Bi1/2Na1/2)TiO3–1/2(Bi2O3·Sc2O3) System

View through CrossRef
Bismuth sodium titanate, (Bi1/2Na1/2)TiO3 (BNT)-based solid solution, (1- x)(Bi1/2Na1/2)TiO3– x1/2(Bi2O3·Sc2O3) [BNST-100 x], was studied in order to determine its dielectric, ferroelectric and piezoelectric properties as a new group of lead-free piezoelectric ceramics. Measurements of dielectric and piezoelectric properties show that the BNST-100 x ceramics of composition near BNT composition have relatively low free permittivity, ε 33 T/ε 0 (=431) and high electromechanical coupling factor, k 33 (=0.42). These ceramics are good candidates for use as lead-free piezoelectric ceramics.
Title: Lead-Free Piezoelectric Ceramics of (Bi1/2Na1/2)TiO3–1/2(Bi2O3·Sc2O3) System
Description:
Bismuth sodium titanate, (Bi1/2Na1/2)TiO3 (BNT)-based solid solution, (1- x)(Bi1/2Na1/2)TiO3– x1/2(Bi2O3·Sc2O3) [BNST-100 x], was studied in order to determine its dielectric, ferroelectric and piezoelectric properties as a new group of lead-free piezoelectric ceramics.
Measurements of dielectric and piezoelectric properties show that the BNST-100 x ceramics of composition near BNT composition have relatively low free permittivity, ε 33 T/ε 0 (=431) and high electromechanical coupling factor, k 33 (=0.
42).
These ceramics are good candidates for use as lead-free piezoelectric ceramics.

Related Results

(Bi1/2Na1/2)TiO3-BaTiO3 System for Lead-Free Piezoelectric Ceramics
(Bi1/2Na1/2)TiO3-BaTiO3 System for Lead-Free Piezoelectric Ceramics
One of the (Bi1/2Na1/2)TiO3 (BNT)-based solid solutions, Ba-modified bismuth sodium titanate, (Bi1/2Na1/2)1-x Ba x TiO3 (BN...
Piezoelectric Properties of Perovskite-Type Lead-Free Piezoelectric Ceramics under Large Amplitude Continuous Driving
Piezoelectric Properties of Perovskite-Type Lead-Free Piezoelectric Ceramics under Large Amplitude Continuous Driving
High-power piezoelectric characteristics of (Bi1/2Na1/2)TiO3(BNT)- and KNbO3(KN)-based ceramics at continuous driving were investigated. The selected compositions of BNT- and KN-ba...
Effects of zirconium element on the microstructure and deuterium retention of W–Zr/Sc2O3 composites
Effects of zirconium element on the microstructure and deuterium retention of W–Zr/Sc2O3 composites
AbstractDense W and W–Zr composites reinforced with Sc2O3 particles were produced through powder metallurgy and subsequent spark plasma sintering (SPS) at 1700 °C and 58 MPa. Resul...
Co3O4-Bi2O3 heterojunction; An effective photocatalyst for photodegradation of rhodamine B dye
Co3O4-Bi2O3 heterojunction; An effective photocatalyst for photodegradation of rhodamine B dye
Abstract Recently, the research on development of visible-light-active photocatalysts for photodegradation of organic pollutants has got much attention. Therefore, this stu...
A Constitutive Model for Piezoelectric Paint with Mixed Connectivity
A Constitutive Model for Piezoelectric Paint with Mixed Connectivity
This article presents a constitutive model for piezoelectric paint that addresses its special characteristics such as mixed connectivity and air void content. Piezoelectric paint i...
Ferroelectric properties of (Pb, Ca) TiO3 and (Pb, La) TiO3 ceramics
Ferroelectric properties of (Pb, Ca) TiO3 and (Pb, La) TiO3 ceramics
There is currently widespread interest in developing a range in electronic devices exploiting the ferroelectric, pyroelectric and piezoelectric properties of modified PbTiO3 cerami...
Review of high temperature piezoelectric materials, devices, and applications
Review of high temperature piezoelectric materials, devices, and applications
Piezoelectric functional materials have been extensively studied and employed in numerous devices. With the rapid development of modern industries, such as power plants, aerospace,...

Back to Top