Javascript must be enabled to continue!
Enhanced protection face masks do not adversely impact thermophysiological comfort
View through CrossRef
The World Health Organization has advocated mandatory face mask usage to combat the spread of COVID-19, with multilayer masks recommended for enhanced protection. However, this recommendation has not been widely adopted, with noncompliant persons citing discomfort during prolonged usage of face masks. And yet, a scientific understanding on how face mask fabrics/garment systems affect thermophysiological comfort remains lacking. We aimed to investigate how fabric/garment properties alter the thermal and evaporative resistances responsible for thermophysiological strain. We constructed 12 different layered facemasks (D1-D5, T1-T6, Q1) with various filters using commercially available fabrics. Three approaches were employed: (1) the evaporative and thermal resistances were measured in all the test face masks using the medium size to determine the effect of fabric properties; (2) the effect of face mask size by testing close-fitted (small), fitted (medium) and loose fitted (large) face mask T-6; (3) the effect of face mask fit by donning a large size face mask T-6, both loose and tightened using thermal manikin, Newton. ANOVA test revealed that the additional N95 middle layer filter has no significant effect on the thermal resistances of all the face masks, and evaporative resistances except for face masks T-2 and T-3 (P-values<0.05) whereas size significantly affected thermal and evaporative resistances (P-values<0.05). The correlation coefficient between the air gap size and the thermal and evaporative resistance of face masks T-6 were R2 = 0.96 and 0.98, respectively. The tight fit large face mask had superior performance in the dissipation of heat and moisture from the skin (P-values <0.05). Three-layer masks incorporating filters and water-resistant and antimicrobial/antiviral finishes did not increase discomfort. Interestingly, using face masks with fitters improved user comfort, decreasing thermal and evaporative resistances in direct opposition to the preconceived notion that safer masks decrease comfort.
Public Library of Science (PLoS)
Title: Enhanced protection face masks do not adversely impact thermophysiological comfort
Description:
The World Health Organization has advocated mandatory face mask usage to combat the spread of COVID-19, with multilayer masks recommended for enhanced protection.
However, this recommendation has not been widely adopted, with noncompliant persons citing discomfort during prolonged usage of face masks.
And yet, a scientific understanding on how face mask fabrics/garment systems affect thermophysiological comfort remains lacking.
We aimed to investigate how fabric/garment properties alter the thermal and evaporative resistances responsible for thermophysiological strain.
We constructed 12 different layered facemasks (D1-D5, T1-T6, Q1) with various filters using commercially available fabrics.
Three approaches were employed: (1) the evaporative and thermal resistances were measured in all the test face masks using the medium size to determine the effect of fabric properties; (2) the effect of face mask size by testing close-fitted (small), fitted (medium) and loose fitted (large) face mask T-6; (3) the effect of face mask fit by donning a large size face mask T-6, both loose and tightened using thermal manikin, Newton.
ANOVA test revealed that the additional N95 middle layer filter has no significant effect on the thermal resistances of all the face masks, and evaporative resistances except for face masks T-2 and T-3 (P-values<0.
05) whereas size significantly affected thermal and evaporative resistances (P-values<0.
05).
The correlation coefficient between the air gap size and the thermal and evaporative resistance of face masks T-6 were R2 = 0.
96 and 0.
98, respectively.
The tight fit large face mask had superior performance in the dissipation of heat and moisture from the skin (P-values <0.
05).
Three-layer masks incorporating filters and water-resistant and antimicrobial/antiviral finishes did not increase discomfort.
Interestingly, using face masks with fitters improved user comfort, decreasing thermal and evaporative resistances in direct opposition to the preconceived notion that safer masks decrease comfort.
Related Results
Denim Fabric: Construction, Thermophysiological Comfort and Future Trends
Denim Fabric: Construction, Thermophysiological Comfort and Future Trends
Denim fabric is widely used in fashion, known for its durability, versatility, and style. However, its effect on thermophysiological comfort, particularly in a variety of environme...
A proposed method for quality evaluation of COVID-19 reusable face mask
A proposed method for quality evaluation of COVID-19 reusable face mask
During the time of COVID-19, the use of face masks has become an essential control and prevention measure. The wide usage of disposable face masks has presented a great challenge t...
Microbiological Analysis of Consecutively used Face Masks during the Covid-19 Pandemic
Microbiological Analysis of Consecutively used Face Masks during the Covid-19 Pandemic
It is unanimously approved that face mask greatly supports reducing COVID-19 transmission. And it is still an important tool for dealing with the COVID-19 pandemic. However the uti...
Increased life expectancy of heart failure patients in a rural center by a multidisciplinary program
Increased life expectancy of heart failure patients in a rural center by a multidisciplinary program
Abstract
Funding Acknowledgements
Type of funding sources: None.
INTRODUCTION Patients with heart failure (HF)...
Efficacy of Generalized Face Masking Mandates
Efficacy of Generalized Face Masking Mandates
This commentary discusses if targeted uses of face masks may provide better results than generalized face masks mandates to limit the spread of Covid-19. The study is based on a li...
Bayesian network meta-analysis of face masks' impact on human physiology
Bayesian network meta-analysis of face masks' impact on human physiology
AbstractSeveral concerns regarding the safety of face masks use have been propounded in public opinion. The objective of this review is to examine if these concerns find support in...
Migration of Microplastics and Phthalates from Face Masks to Water
Migration of Microplastics and Phthalates from Face Masks to Water
Since the outbreak of COVID-19, face masks have been introduced in the complex strategy of infection prevention and control. Face masks consist of plastic polymers and additives su...
The protective performance of reusable cloth face masks, disposable procedure masks, KN95 masks and N95 respirators: Filtration and total inward leakage
The protective performance of reusable cloth face masks, disposable procedure masks, KN95 masks and N95 respirators: Filtration and total inward leakage
Face coverings are a key component of preventive health measure strategies to mitigate the spread of respiratory illnesses. In this study five groups of masks were investigated tha...

