Javascript must be enabled to continue!
Effect of coupling agents on the transport properties of sulfonated poly (ether ether ketone) based composite membrane
View through CrossRef
Abstract
Development of low cost proton exchange membrane surges as a main research topic in order to replace expensive Nafion in the fuel cell industry. In this study, sulfonated poly (ether ether ketone) (SPEEK) was used as the base polymer for the purpose. Silicotungstic acid supported on silica (SiWA-SiO2) was incorporated into SPEEK polymer matrix to improve the performance of composite membrane. 3-aminopropyltriethoxysilane (APTES) and carbonyldiimidazole (CDI) were used as coupling agents to increase the compatibility of the organic and inorganic phases in the composite membrane. The reaction mechanisms involve the interaction between imidazole group of CDI with sulfonic acid group of SPEEK polymer followed by substitution using APTES. Finally, inorganic silica will attach to the inorganic functionalities of APTES and complete the organic-inorganic bridge between the two phases. Stabilisation of SiWA-SiO2 additives in the polymer matrix was greatly improved when APTES and CDI are added. It was found that SPEEK/SiO2-SiWA exhibited smooth, homogenous and compact membrane structure. This could reduce the permeability of the membrane to methanol. Although the composite membrane had low water uptake, presence of ample amount of SiWA within the polymer matrix helped to enhance the proton conductivity of SPEEK composite membrane. It was reported that the overall selectivity is increased to 10.6 × 104 S.s/cm3.
Title: Effect of coupling agents on the transport properties of sulfonated poly (ether ether ketone) based composite membrane
Description:
Abstract
Development of low cost proton exchange membrane surges as a main research topic in order to replace expensive Nafion in the fuel cell industry.
In this study, sulfonated poly (ether ether ketone) (SPEEK) was used as the base polymer for the purpose.
Silicotungstic acid supported on silica (SiWA-SiO2) was incorporated into SPEEK polymer matrix to improve the performance of composite membrane.
3-aminopropyltriethoxysilane (APTES) and carbonyldiimidazole (CDI) were used as coupling agents to increase the compatibility of the organic and inorganic phases in the composite membrane.
The reaction mechanisms involve the interaction between imidazole group of CDI with sulfonic acid group of SPEEK polymer followed by substitution using APTES.
Finally, inorganic silica will attach to the inorganic functionalities of APTES and complete the organic-inorganic bridge between the two phases.
Stabilisation of SiWA-SiO2 additives in the polymer matrix was greatly improved when APTES and CDI are added.
It was found that SPEEK/SiO2-SiWA exhibited smooth, homogenous and compact membrane structure.
This could reduce the permeability of the membrane to methanol.
Although the composite membrane had low water uptake, presence of ample amount of SiWA within the polymer matrix helped to enhance the proton conductivity of SPEEK composite membrane.
It was reported that the overall selectivity is increased to 10.
6 × 104 S.
s/cm3.
Related Results
Procedure for Western blot v1
Procedure for Western blot v1
Goal: This document has the objective of standardizing the protocol for Western blot. This technique allows the detection of specific proteins separated on polyacrylamide gel and t...
NONLINEAR STATIC ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS
NONLINEAR STATIC ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS USING ANALYSIS OF COMPOSITE SHELLS
This paper presents the results of the geometric nonlinear analysis of composite shell subjected to static load by using an edge-based smoothed finite elements (ES) and the mixed i...
An Investigation into Hydrophobic Membrane Fouling in Desalination Using Membrane Distillation Technology
An Investigation into Hydrophobic Membrane Fouling in Desalination Using Membrane Distillation Technology
Demand for freshwater supplies is continuously increasing globally to the extent where some parts of the world became highly water stressed. In particular, the Arabian Gulf states ...
Novel Proton Exchange Membranes Based on Sulfonated Poly(acrylonitrile-co-glycidyl methacrylate)/Poly(vinyl chloride) Composite
Novel Proton Exchange Membranes Based on Sulfonated Poly(acrylonitrile-co-glycidyl methacrylate)/Poly(vinyl chloride) Composite
In this study, novel proton exchange membranes (PEMs) based on a composite of sulfonated polyacrylonitrile (SPAN), sulfonated polyglycidyl methacrylate (SPGMA), or sulfonated poly(...
Application of Innovative High Temperature Deep Pyrolysis Technology to Treat Drilling Cuttings Harmlessly in Tarim Basim
Application of Innovative High Temperature Deep Pyrolysis Technology to Treat Drilling Cuttings Harmlessly in Tarim Basim
Abstract
Due to high temperature, high pressure, and gypsum-salt formations in the Tian Mountain Front Block in Tarim Basin, the stability and rheology of traditiona...
Efficient Bioconversion of Raspberry Ketone in Escherichia Coli Using Fatty Acids Feedstocks
Efficient Bioconversion of Raspberry Ketone in Escherichia Coli Using Fatty Acids Feedstocks
Abstract
BackgroundPhenylpropanoid including raspberry ketone, is a kind of important natural plant product and widely used in pharmaceuticals, chemicals, cosmetics, and he...
A Novel Fluorinated Graphite-Loaded Sulfonated Poly(ether ether ketone) Membrane with Enhanced Stability and Efficiency for Proton Exchange Membrane Fuel Cells
A Novel Fluorinated Graphite-Loaded Sulfonated Poly(ether ether ketone) Membrane with Enhanced Stability and Efficiency for Proton Exchange Membrane Fuel Cells
A membrane combining high proton conductivity and excellent durability is essential for proton exchange membrane fuel cells (PEMFCs). Sulfonated poly(ether ether ketone) (SPEEK) of...
Characterization of Material Extrusion-Printed Amorphous Poly(Ether Ketone Ketone) (PEKK) Parts
Characterization of Material Extrusion-Printed Amorphous Poly(Ether Ketone Ketone) (PEKK) Parts
Poly(ether ketone ketone) (PEKK), as a representative of high-performance poly(aryl ether ketones), shows outstanding thermomechanical properties, opening up a huge range of differ...

