Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Study on properties of Al2O3-13wt.% TiO2 coating sprayed by atmospheric plasma spraying
View through CrossRef
The Al2O3-13wt.% TiO2 coatings were fabricated on 304 steel by atmospheric plasma
spraying (APS). The properties of coating were analyzed. The results show that the
Al2O3-13wt.% TiO2 coating exhibits a typical lamellar structure with some microcracks
and pores, which are attributed to the nature of APS. The coating presents a mechanical
bond with the substrate and bonds well. Unlike the physical phase of the Al2O3-13wt.%
TiO2 powder, the physical phase of the coating was increased with γ-Al2O3 and Al2TiO5
phases. The surface roughness value of the Al2O3-13wt.% TiO2 coating is 5.07 μm and the
coating has a relatively smooth surface. The average hardness of Al2O3-13wt.% TiO2
coating is 801 HV0.2, but its hardness measurement value has a certain fluctuation. The
Al2O3-13wt.% TiO2 coating has good corrosion resistance compared to the substrate.
Title: Study on properties of Al2O3-13wt.% TiO2 coating sprayed by atmospheric plasma spraying
Description:
The Al2O3-13wt.
% TiO2 coatings were fabricated on 304 steel by atmospheric plasma
spraying (APS).
The properties of coating were analyzed.
The results show that the
Al2O3-13wt.
% TiO2 coating exhibits a typical lamellar structure with some microcracks
and pores, which are attributed to the nature of APS.
The coating presents a mechanical
bond with the substrate and bonds well.
Unlike the physical phase of the Al2O3-13wt.
%
TiO2 powder, the physical phase of the coating was increased with γ-Al2O3 and Al2TiO5
phases.
The surface roughness value of the Al2O3-13wt.
% TiO2 coating is 5.
07 μm and the
coating has a relatively smooth surface.
The average hardness of Al2O3-13wt.
% TiO2
coating is 801 HV0.
2, but its hardness measurement value has a certain fluctuation.
The
Al2O3-13wt.
% TiO2 coating has good corrosion resistance compared to the substrate.
Related Results
Offshore Corrosion Protection With Thermal-Sprayed Aluminum
Offshore Corrosion Protection With Thermal-Sprayed Aluminum
ABSTRACT
Thermal-sprayed aluminum (TSA) coatings offer distinct advantages for long-term corrosion protection of offshore steel structures and facilities over con...
Decolorization of textile wastewater by electrooxidation process using different anode materials: Statistical optimization
Decolorization of textile wastewater by electrooxidation process using different anode materials: Statistical optimization
AbstractThe presence of reactive dyes in textile wastewater is a serious environmental concern due to their associated mutagenic and carcinogenic effects. The present study aims to...
Photocatalytic Syntheis of L-Pipecolinic Acid from L-Lysine by Hollow Core-Shell Titania Particles
Photocatalytic Syntheis of L-Pipecolinic Acid from L-Lysine by Hollow Core-Shell Titania Particles
A possible approach for photocatalytic selective organic synthesis is utilization of photocatalysts of or in defined microstructures. We have reported [1,2] fabrication of a novel...
Coating Processes of Pharmaceutical Applicability: A Glimpse
Coating Processes of Pharmaceutical Applicability: A Glimpse
Presentation of manuscript is aiming to furnish glimpse on coating processes. Coating is process of snugly covering substrate surface with coating materials (CoM). In due course co...
Performance comparison of dye-sensitized solar cells by using different metal oxide- coated TiO2 as the photoanode
Performance comparison of dye-sensitized solar cells by using different metal oxide- coated TiO2 as the photoanode
In order to increase the conversion efficiency of dye-sensitized solar cells, TiO2 photoanode surface is often covered with a metal oxide layer to form a core-shell composite struc...
Study on microstructure and friction and wear properties of wear-resistant coatings prepared by thermal spraying
Study on microstructure and friction and wear properties of wear-resistant coatings prepared by thermal spraying
In this paper, Cr2O3-2TiO2 and Al2O3 coatings are prepared by atmospheric plasma spraying (APS), and WC-10Co4Cr was prepared by high velocity oxygen fuel (HVOF). The powders and co...
Influence of TiO2 and Al2O3 Nanoparticles Addition on Thermal, Wettability and IMC Growth of Sn-3.0Ag-0.5Cu Lead-Free Solder at Different Reflow Temperature
Influence of TiO2 and Al2O3 Nanoparticles Addition on Thermal, Wettability and IMC Growth of Sn-3.0Ag-0.5Cu Lead-Free Solder at Different Reflow Temperature
This study investigated the influence of adding 0.50 wt% and 1.0 wt% titanium dioxide (TiO2) and aluminium oxide (Al2O3) nanoparticles on the properties of Sn3.0Ag0.5Cu (SAC305) le...
Core/Shell ZnO/TiO2, SiO2/TiO2, Al2O3/TiO2, and Al1.9Co0.1O3/TiO2 Nanoparticles for the Photodecomposition of Brilliant Blue E-4BA
Core/Shell ZnO/TiO2, SiO2/TiO2, Al2O3/TiO2, and Al1.9Co0.1O3/TiO2 Nanoparticles for the Photodecomposition of Brilliant Blue E-4BA
The synthesis and characterization of ZnO/TiO2, SiO2/TiO2, Al2O3/TiO2, and Al1.9Co0.1O3/TiO2 core/shell nanoparticles (NPs) is reported. The NPs were used for photocatalytic degrad...