Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Nye tray vs sieve tray: A comparison based on computational fluid dynamics and tray efficiency
View through CrossRef
AbstractNye and sieve trays were hydrodynamically simulated and compared. The simulations were performed in a Eulerian‐Eulerian framework under unsteady (transient) conditions at industrial scale. Conducted on an air‐water system, the simulations included three dimensions and two phases. The velocity distribution across the tray, the height of clear liquid, the froth height, and the pressure drop were investigated and compared with experimental data. Péclet number was calculated using hydrodynamic and geometric parameters. The tray efficiencies were also predicted to further compare the two trays. The results showed that the liquid flow was steadier on the Nye tray rather than the sieve tray, possibly because of the special structure of the liquid and gas inlets for the Nye tray.
Title: Nye tray vs sieve tray: A comparison based on computational fluid dynamics and tray efficiency
Description:
AbstractNye and sieve trays were hydrodynamically simulated and compared.
The simulations were performed in a Eulerian‐Eulerian framework under unsteady (transient) conditions at industrial scale.
Conducted on an air‐water system, the simulations included three dimensions and two phases.
The velocity distribution across the tray, the height of clear liquid, the froth height, and the pressure drop were investigated and compared with experimental data.
Péclet number was calculated using hydrodynamic and geometric parameters.
The tray efficiencies were also predicted to further compare the two trays.
The results showed that the liquid flow was steadier on the Nye tray rather than the sieve tray, possibly because of the special structure of the liquid and gas inlets for the Nye tray.
Related Results
Penetration of faba bean sieve elements by pea aphid does not trigger forisome dispersal
Penetration of faba bean sieve elements by pea aphid does not trigger forisome dispersal
AbstractImmediately after their stylets penetrate a phloem sieve element, aphids inject saliva into the sieve element for approximately 30–60 s before they begin to ingest phloem s...
Enhanced Efficiency of the Sieve Tray in a Desulfurization Spray Scrubber
Enhanced Efficiency of the Sieve Tray in a Desulfurization Spray Scrubber
The wet flue gas desulfurization (WFGD) system is widely used in coal-fired power plants worldwide. Improving its efficiency is very important for economical running. In this study...
Experimental Investigation of Permeability and Fluid Loss Properties of Water Based Mud Under High Pressure-High Temperature Conditions
Experimental Investigation of Permeability and Fluid Loss Properties of Water Based Mud Under High Pressure-High Temperature Conditions
Drilling in deeper formations and in high pressure and high temperature (HPHT) environments is a new frontier for the oil industry. Fifty years ago, no one would have imagined dril...
Phloem in Pinophyta
Phloem in Pinophyta
The gymnospermous phloem shows major differences from those of the cryptogams on one hand and the angiosperms on the other. These include both the type of conducting cells as well ...
PERBEDAAN JUMLAH TRAY DENGAN METODE MULTIPLE TRAY ARERATOR PIRAMIDA TERHADAP PENURUNAN MANGAN AIR BERSIH PT. X
PERBEDAAN JUMLAH TRAY DENGAN METODE MULTIPLE TRAY ARERATOR PIRAMIDA TERHADAP PENURUNAN MANGAN AIR BERSIH PT. X
Air bersih PT. Adetex Filamen bersumber dari air permukaan. Kadar Mangan (Mn) pada air bersih di PT. Adetex Filamen setelah dilakukan pemeriksaan adalah 1,10 mg/L dan melebihi baku...
Comparison of the Air-Jet Sieve Method for Determining the Fineness of Cement with Some ASTM Standard Methods
Comparison of the Air-Jet Sieve Method for Determining the Fineness of Cement with Some ASTM Standard Methods
This investigation is concerned with the fineness determination of cement, comparing the air-jet sieve method with ASTM standard test methods such as hand-sieving on the No. 200 si...
Smart Spacer Fluid Modified with Iron Oxide Nanoparticles for In-Situ Property Enhancement was developed for Cleaning Oil Based Drilling Fluids and Characterized Using the Vipulanandan Rheological Model
Smart Spacer Fluid Modified with Iron Oxide Nanoparticles for In-Situ Property Enhancement was developed for Cleaning Oil Based Drilling Fluids and Characterized Using the Vipulanandan Rheological Model
Abstract
During the installation of oil and gas production wells, it is critical to have a successful cementing operation. The quality of the cementing job strongly ...
Data Analysis of Plastic Surgery Instrument Trays Yields Significant Cost Savings and Efficiency Gains
Data Analysis of Plastic Surgery Instrument Trays Yields Significant Cost Savings and Efficiency Gains
Purpose
Inpatient surgery costs have risen 30% over the past 5 years, and the operating room accounts for up to 60% of total hospital operational expense. On average, o...