Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Multifactorial analysis and experiments affecting the effect of fog droplet penetration in fruit tree canopies

View through CrossRef
This study examines the impact of canopy density, side wind speed, nozzle tilt angle, and droplet size on droplet penetration during plant protection spraying operations. Experiments conducted in citrus orchards evaluated how side wind speed and nozzle tilt angle influence droplet penetration across various canopy densities. A Phase Doppler Analyzer (PDA) was used to assess droplet size variations under different nozzle tilt angles and side wind speeds, yielding a multiple linear regression equation (R2 = 0.866) that links nozzle tilt angle and side wind speed with droplet size. Results showed that droplet size decreases with increasing nozzle tilt angle at a constant crosswind speed. Further experiments investigated the effects of droplet size and canopy leaf area density on droplet penetration, involving three canopy leaf area densities, four wind speeds, and six nozzle tilt angles. Droplet deposition and canopy coverage were measured under various spraying parameters, with conventional operations (0° nozzle tilt and orthogonal wind speeds) serving as controls. The study found that adjusting nozzle tilt angle and wind speed enhances droplet penetration in different canopy structures. Optimal parameters varied with leaf area density (LAD): an 18° tilt angle and 3 m/s wind speed for a LAD of 5.94 m3/m3, a 45° tilt angle and 2 m/s wind speed for a LAD of 8.47 m2/m3, and a 36° tilt angle and 3 m/s wind speed for a LAD of 11.12 m2/m3. At 1 m/s, droplet deposition followed a downward parabolic trend with changes in nozzle tilt angle, whereas at 2 m/s, deposition followed an upward parabolic trend. At a side wind speed of 3 m/s, droplet deposition remained unchanged with nozzle tilt angle but decreased with increasing canopy density. Nonlinear regression analysis indicated that leaf area density had a greater impact on deposition differences than droplet size, with droplet penetration decreasing as leaf area density increased. This study provides a reference for enhancing fog droplet penetration techniques in plant protection operations, offering practical guidelines for optimizing spraying conditions and improving pesticide use efficiency in different canopy structures.
Title: Multifactorial analysis and experiments affecting the effect of fog droplet penetration in fruit tree canopies
Description:
This study examines the impact of canopy density, side wind speed, nozzle tilt angle, and droplet size on droplet penetration during plant protection spraying operations.
Experiments conducted in citrus orchards evaluated how side wind speed and nozzle tilt angle influence droplet penetration across various canopy densities.
A Phase Doppler Analyzer (PDA) was used to assess droplet size variations under different nozzle tilt angles and side wind speeds, yielding a multiple linear regression equation (R2 = 0.
866) that links nozzle tilt angle and side wind speed with droplet size.
Results showed that droplet size decreases with increasing nozzle tilt angle at a constant crosswind speed.
Further experiments investigated the effects of droplet size and canopy leaf area density on droplet penetration, involving three canopy leaf area densities, four wind speeds, and six nozzle tilt angles.
Droplet deposition and canopy coverage were measured under various spraying parameters, with conventional operations (0° nozzle tilt and orthogonal wind speeds) serving as controls.
The study found that adjusting nozzle tilt angle and wind speed enhances droplet penetration in different canopy structures.
Optimal parameters varied with leaf area density (LAD): an 18° tilt angle and 3 m/s wind speed for a LAD of 5.
94 m3/m3, a 45° tilt angle and 2 m/s wind speed for a LAD of 8.
47 m2/m3, and a 36° tilt angle and 3 m/s wind speed for a LAD of 11.
12 m2/m3.
At 1 m/s, droplet deposition followed a downward parabolic trend with changes in nozzle tilt angle, whereas at 2 m/s, deposition followed an upward parabolic trend.
At a side wind speed of 3 m/s, droplet deposition remained unchanged with nozzle tilt angle but decreased with increasing canopy density.
Nonlinear regression analysis indicated that leaf area density had a greater impact on deposition differences than droplet size, with droplet penetration decreasing as leaf area density increased.
This study provides a reference for enhancing fog droplet penetration techniques in plant protection operations, offering practical guidelines for optimizing spraying conditions and improving pesticide use efficiency in different canopy structures.

Related Results

British Food Journal Volume 35 Issue 5 1933
British Food Journal Volume 35 Issue 5 1933
The Fruit Control Act, 1924, is an important one as it provides for the establishment of a Fruit Control Board, and is described as an “Act to make Provision for Control of the Fru...
Life-cycle analysis of fog types in the Inn Valley, Austria
Life-cycle analysis of fog types in the Inn Valley, Austria
Fog and low stratus are a widespread phenomena worldwide, influencing the climate system and human activities. They reflect sunlight, reducing incoming solar radiation, yet also tr...
Dense Fog Burst Reinforcement over Eastern China
Dense Fog Burst Reinforcement over Eastern China
<p>Fog can be hazardous weather. Dense and polluted fog is especially known to impact transportation, air quality, and public health. Low visibilities on fog days thr...
Atmospheric water collection across diverse climates along the Chilean coast: unraveling synoptic to local drivers of fog harvesting
Atmospheric water collection across diverse climates along the Chilean coast: unraveling synoptic to local drivers of fog harvesting
The 3000 km long coast of Chile, characterized by a steep mountain range, interacts almost everywhere with the Southeast Pacific stratocumulus (Sc) low clouds deck, producing narro...
Controlled production of double emulsion by microfluid technique
Controlled production of double emulsion by microfluid technique
All planned inertial confinement fusion (ICF) capsule targets except machined beryllium require plastic mandrels with tight requirements on which the ablator is built. In this pape...
Influence of Working Pressure and Pressure Difference on Static Droplet Evaporation Characteristics
Influence of Working Pressure and Pressure Difference on Static Droplet Evaporation Characteristics
The function of steam separator is to remove the small droplets carried by the vapor stream and to provide qualified saturated vapor for the steam turbine in the nuclear power stat...
Fog dissipation through ground warming monitored by satellite image : an approach to support regional forecasting 
Fog dissipation through ground warming monitored by satellite image : an approach to support regional forecasting 
<p>By reducing the atmospheric visibility, fog events have strong impacts on several humans activities. Transport security, military operations, air quality forecast ...
Lattice Boltzmann simulation of droplet dynamics in a bifurcating micro-channel
Lattice Boltzmann simulation of droplet dynamics in a bifurcating micro-channel
The droplet dynamic in a bifurcating micro-channel, as one of the basic multiphase problems, is frequently encountered in the fields of science and engineering. Due to its great re...

Back to Top