Javascript must be enabled to continue!
Modification of icy planetesimal interiors by early thermal evolution and collisions
View through CrossRef
<p>In the early solar system radiogenic heating by <sup>26</sup>Al and collisions are the two prominent ways expected to modify the internal composition of icy planetesimals, building blocks of comets, by removing highly volatile compounds like CO, CO<sub>2</sub> and NH<sub>3</sub>. However, observations indicate that even large comets like Hale-Bopp (R &#8776; 35 km) can be rich in these highly volatile compounds [1].<br>Here we constrain under which conditions icy planetesimals experiencing both internal heating and collisions can retain pristine interiors [2]. For this purpose, we employ both the state-of-the-art finite difference marker-in-cell code I2ELVIS [3] to model the thermal evolution in 2D infinite cylinder geometry and a 3D SPH code [4] to study the interior heating caused by collisions among icy planetesimals. For simplicity we assume circular porous icy planetesimals with a low density (&#8776; 470 kg/m<sup>3</sup>) based on measurements for comet 67P/Churyumov-Gerasimenko [5].<br>For the parameter study of the thermal history we vary (i) icy planetesimal radii, (ii) formation time and the (iii) the silicate/ice ratio. For the latter we keep the mean density fixed and change the porosity of the icy planetesimal. For the impact models we use porous, low-strength objects and vary (i) target and (ii) projectile radii, (iii) impact velocity as well as (iv) impact angle. Potential losses of volatile compounds from their interiors are calculated based on their critical temperatures taken from literature [6]. Our combined results indicate that only small or late-formed icy planetesimals remain mostly pristine, while early formed objects can even reach temperatures high enough to melt the water ice.</p><p>REFERENCES<br>[1] Morbidelli & Nesvorn&#253;, In: The Trans-Neptunian Solar System. 25&#8211;59 (2019). [2] Golabek & Jutzi, Icarus 363, 114437 (2021). [3] Gerya & Yuen, Phys. Earth Planet. Int. 163, 83-105 (2007). [4] Jutzi, Planet. Space Sci. 107, 3&#8211;9 (2015). [5] Sierks et al., Science 347, 1044 (2015). [6] Davidsson et al., Astron. Astrophys. 592, A63 (2016).</p>
Title: Modification of icy planetesimal interiors by early thermal evolution and collisions
Description:
<p>In the early solar system radiogenic heating by <sup>26</sup>Al and collisions are the two prominent ways expected to modify the internal composition of icy planetesimals, building blocks of comets, by removing highly volatile compounds like CO, CO<sub>2</sub> and NH<sub>3</sub>.
However, observations indicate that even large comets like Hale-Bopp (R &#8776; 35 km) can be rich in these highly volatile compounds [1].
<br>Here we constrain under which conditions icy planetesimals experiencing both internal heating and collisions can retain pristine interiors [2].
For this purpose, we employ both the state-of-the-art finite difference marker-in-cell code I2ELVIS [3] to model the thermal evolution in 2D infinite cylinder geometry and a 3D SPH code [4] to study the interior heating caused by collisions among icy planetesimals.
For simplicity we assume circular porous icy planetesimals with a low density (&#8776; 470 kg/m<sup>3</sup>) based on measurements for comet 67P/Churyumov-Gerasimenko [5].
<br>For the parameter study of the thermal history we vary (i) icy planetesimal radii, (ii) formation time and the (iii) the silicate/ice ratio.
For the latter we keep the mean density fixed and change the porosity of the icy planetesimal.
For the impact models we use porous, low-strength objects and vary (i) target and (ii) projectile radii, (iii) impact velocity as well as (iv) impact angle.
Potential losses of volatile compounds from their interiors are calculated based on their critical temperatures taken from literature [6].
Our combined results indicate that only small or late-formed icy planetesimals remain mostly pristine, while early formed objects can even reach temperatures high enough to melt the water ice.
</p><p>REFERENCES<br>[1] Morbidelli & Nesvorn&#253;, In: The Trans-Neptunian Solar System.
25&#8211;59 (2019).
[2] Golabek & Jutzi, Icarus 363, 114437 (2021).
[3] Gerya & Yuen, Phys.
Earth Planet.
Int.
163, 83-105 (2007).
[4] Jutzi, Planet.
Space Sci.
107, 3&#8211;9 (2015).
[5] Sierks et al.
, Science 347, 1044 (2015).
[6] Davidsson et al.
, Astron.
Astrophys.
592, A63 (2016).
</p>.
Related Results
Revisiting Planetesimal Accretion onto Proto-Jupiter
Revisiting Planetesimal Accretion onto Proto-Jupiter
<p><strong>Introduction</strong></p>
<p>The detailed observations by the NASA Juno spacecraft has advanced Jup...
Modification of icy planetesimal interiors by early thermal evolution and collisions
Modification of icy planetesimal interiors by early thermal evolution and collisions
<p>In the early solar system radiogenic heating by <sup>26</sup>Al and collisions are the two prominent ways expected to modify the intern...
Thermal Effects in High Compactness CEA Stack
Thermal Effects in High Compactness CEA Stack
Thermal management is a pivotal aspect of stack durability and system operability. Consequently, understanding the thermal mapping within a stack based on its operating conditions ...
Near-Surface Properties of Europa Constrained by the Galileo PPR Measurements
Near-Surface Properties of Europa Constrained by the Galileo PPR Measurements
NASA's Europa Clipper mission will characterize the current and recent surface activity of the icy-moon Europa through a wide range of remote sensing observations. In particular, t...
Which stars can form planets: Planetesimal formation at low metallicities
Which stars can form planets: Planetesimal formation at low metallicities
The diversity of exoplanets has been linked to the disc environment in which they form, where the host star metallicity and the formation pathways play a crucial role. In the conte...
Density of carbonaceous organic matter in icy bodies
Density of carbonaceous organic matter in icy bodies
Carbonaceous organic matter (COM), between 20 and 50%, is needed to model the rocky core of icy bodies (Neri et al, 2020, Reynard & Sotin. 2023), and account for their mass...
Polarized reflectance of salty flash-frozen ice particles
Polarized reflectance of salty flash-frozen ice particles
Introduction:  In-situ and telescopic observations of icy moons during the last decades have improved our understanding of these bodies. One of the main features discovere...
Investigating the pallasite parent body at multiple scales
Investigating the pallasite parent body at multiple scales
The formation mechanism of pallasite meteorites, which are mixtures of Fe-Ni metal and olivine (Figure 1), is not agreed upon within the literature. Formation hypotheses as diverse...

