Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Performance and Characterization of TWIP Steels for Automotive Applications
View through CrossRef
Abstract
This article reviews the current state of the art in understanding twinning-induced plasticity (TWIP) steels with an emphasis on linking microstructure to mechanical behavior by means of microstructure-aware constitutive models. A materials selection exercise is conducted to substantiate that TWIP steels are more desirable than most other materials for use in structural and safety components of automobiles. Gaps in the knowledge of TWIP steels that are hindering their adoption for automotive applications are identified. This review concludes by suggesting fundamental research needs for promoting the design of TWIP steels with improved properties and performance for structural components in automotive applications.
Title: Performance and Characterization of TWIP Steels for Automotive Applications
Description:
Abstract
This article reviews the current state of the art in understanding twinning-induced plasticity (TWIP) steels with an emphasis on linking microstructure to mechanical behavior by means of microstructure-aware constitutive models.
A materials selection exercise is conducted to substantiate that TWIP steels are more desirable than most other materials for use in structural and safety components of automobiles.
Gaps in the knowledge of TWIP steels that are hindering their adoption for automotive applications are identified.
This review concludes by suggesting fundamental research needs for promoting the design of TWIP steels with improved properties and performance for structural components in automotive applications.
Related Results
Stress corrosion cracking and precipitation strengthening mechanism in TWIP steels: progress and prospects
Stress corrosion cracking and precipitation strengthening mechanism in TWIP steels: progress and prospects
Abstract
Twinning-induced plasticity (TWIP) steels are increasingly receiving wide attention for automotive applications due to their outstanding combination of d...
Control of the two-wheeled inverted pendulum (TWIP) robot in presence of model uncertainty and motion restriction
Control of the two-wheeled inverted pendulum (TWIP) robot in presence of model uncertainty and motion restriction
Purpose
The purpose of this paper is to improve control performance and safety of a real two-wheeled inverted pendulum (TWIP) robot by dealing with model uncert...
Electron Beam Welding and Characterization of Dissimilar Joints with TWIP Matrix Composites
Electron Beam Welding and Characterization of Dissimilar Joints with TWIP Matrix Composites
Welding of Mg‐PSZ‐reinforced TWIP metal matrix composites (TWIP MMC) requires precise control over the level of dilution: otherwise, the risk of cavity formation arises. For this w...
Features of the restructuring of ods steels with different nanostructures under irradiation
Features of the restructuring of ods steels with different nanostructures under irradiation
Nanoscale mechanisms of radiation hardening of oxide dispersion-strengthened (ODS) steels steels with different nanostructures, differing in the type of inclusions, their sizes and...
Stretch Bendability of Advanced High Strength Steels
Stretch Bendability of Advanced High Strength Steels
<div class="htmlview paragraph">Bending under tension is an important deformation mode during stamping and has been observed to limit achievable ductility for high strength s...
Improved Truck Castings
Improved Truck Castings
This paper examines alternative, improved materials for truck castings. The first part looks at steels that would not require post-weld heat treatment after repair welding. The sec...
Mechanical Properties and Microstructure Evolution During Deformation of Fe–Mn–C TWIP Steel
Mechanical Properties and Microstructure Evolution During Deformation of Fe–Mn–C TWIP Steel
AbstractThe mechanical and deformation microstructure properties of the Fe–Mn–C TWIP steel was investigated by means of tensile experiment, in situ scanning electron microscope (SE...
Mold Steels
Mold Steels
Abstract
Mold steels are used for plastic molding and certain die-casting applications and are designated as group P steels in the AISI classification system. The fa...