Javascript must be enabled to continue!
Effects of Erosion and Deposition on Constraining Vertical Slip Rates of Thrust Faults: A Case Study of the Minle–Damaying Fault in the North Qilian Shan, NE Tibetan Plateau
View through CrossRef
The height of a thrust-fault scarp on a fluvial terrace would be modified due to erosion and deposition, and these surface processes can also influence the dating of terraces. Under such circumstances, the vertical slip rate of a fault can be misestimated due to the inaccurate displacement and/or abandonment age of the terrace. In this contribution, considering the effect of erosion and deposition on fault scarps, we re-constrained the vertical slip rate of the west end of the Minle–Damaying Fault (MDF), one of the thrusts in the north margin of the Qilian Shan that marks the northeastern edge of the Tibetan Plateau. In addition, we tried to explore a more reliable method for obtaining the vertical fault displacement and the abandonment age of terraces with AMS 14C dating. The heights of the surface scarps and the displacements of the fluvial gravel layers exposed on the Yudai River terraces were precisely measured with the Structure from Motion (SfM) photogrammetry and the real-time kinematic (RTK) GPS. The Monte Carlo simulation method was used to estimate the uncertainties of fault displacements and vertical slip rates. Based on comparative analysis, the dating sample from the fluvial sand layer underlying the thickest loess in the footwall was suggested to best represent the abandonment age of the terrace, and the fluvial gravel layer could better preserve the original vertical fault displacement compared with the surface layer. Using the most reliable ages and vertical offsets, the vertical slip rate of the MDF was estimated to be 0.25–0.28 mm/a since 42.3 ± 0.5 ka (T10) and 0.14–0.24 mm/a since 16.1 ± 0.2 ka (T7). The difference between the wrong vertical slip rate and the right one can even reach an order of magnitude. We also suggest that if the built measuring profile is long enough, the uncertainties in the height of a surface scarp would be better constrained and the result can also be taken as the vertical fault displacement. Furthermore, the consistency of chronology with stratigraphic sequence or with terrace sequence are also key to constraining the abandonment ages of terraces. The fault activity at the study site is weaker than that in the middle and east segments of the MDF, which is likely due to its end position.
Title: Effects of Erosion and Deposition on Constraining Vertical Slip Rates of Thrust Faults: A Case Study of the Minle–Damaying Fault in the North Qilian Shan, NE Tibetan Plateau
Description:
The height of a thrust-fault scarp on a fluvial terrace would be modified due to erosion and deposition, and these surface processes can also influence the dating of terraces.
Under such circumstances, the vertical slip rate of a fault can be misestimated due to the inaccurate displacement and/or abandonment age of the terrace.
In this contribution, considering the effect of erosion and deposition on fault scarps, we re-constrained the vertical slip rate of the west end of the Minle–Damaying Fault (MDF), one of the thrusts in the north margin of the Qilian Shan that marks the northeastern edge of the Tibetan Plateau.
In addition, we tried to explore a more reliable method for obtaining the vertical fault displacement and the abandonment age of terraces with AMS 14C dating.
The heights of the surface scarps and the displacements of the fluvial gravel layers exposed on the Yudai River terraces were precisely measured with the Structure from Motion (SfM) photogrammetry and the real-time kinematic (RTK) GPS.
The Monte Carlo simulation method was used to estimate the uncertainties of fault displacements and vertical slip rates.
Based on comparative analysis, the dating sample from the fluvial sand layer underlying the thickest loess in the footwall was suggested to best represent the abandonment age of the terrace, and the fluvial gravel layer could better preserve the original vertical fault displacement compared with the surface layer.
Using the most reliable ages and vertical offsets, the vertical slip rate of the MDF was estimated to be 0.
25–0.
28 mm/a since 42.
3 ± 0.
5 ka (T10) and 0.
14–0.
24 mm/a since 16.
1 ± 0.
2 ka (T7).
The difference between the wrong vertical slip rate and the right one can even reach an order of magnitude.
We also suggest that if the built measuring profile is long enough, the uncertainties in the height of a surface scarp would be better constrained and the result can also be taken as the vertical fault displacement.
Furthermore, the consistency of chronology with stratigraphic sequence or with terrace sequence are also key to constraining the abandonment ages of terraces.
The fault activity at the study site is weaker than that in the middle and east segments of the MDF, which is likely due to its end position.
Related Results
Deformation rates of the Minle-Damaying fault from folded fluvial terraces: Implications for kinematics of the Qilian Shan frontal thrust, NE Tibet
Deformation rates of the Minle-Damaying fault from folded fluvial terraces: Implications for kinematics of the Qilian Shan frontal thrust, NE Tibet
Fold-and-thrust belts typically develop in the frontal regions of compressive orogens and are characterized by significant fault offsets and fold deformation. Quantifying their geo...
Decomposition and Evolution of Intracontinental Strike‐Slip Faults in Eastern Tibetan Plateau
Decomposition and Evolution of Intracontinental Strike‐Slip Faults in Eastern Tibetan Plateau
Abstract:Little attention had been paid to the intracontinental strike‐slip faults of the Tibetan Plateau. Since the discovery of the Longriba fault using re‐measured GPS data in 2...
The Bend on the Haiyuan Strike‐Slip Fault Leads to Segmented Activity of the Minle‐Damaying Thrust Fault in the Qilian Shan, the Northeastern Tibetan Plateau
The Bend on the Haiyuan Strike‐Slip Fault Leads to Segmented Activity of the Minle‐Damaying Thrust Fault in the Qilian Shan, the Northeastern Tibetan Plateau
AbstractThe present tectonic regime of the Qilian Shan is dominated by large northeast and northwest striking strike‐slip faults and northwest striking thrust faults. Deformation d...
Active present faults of the Western segment of the Qilian Mountains (Northern Tiber)
Active present faults of the Western segment of the Qilian Mountains (Northern Tiber)
The Qilian Mountains, as the northeastern margin of the Tibetan Plateau, absorbed the crustal shortening and accommodated the left-lateral displacement of the Altun Tagh fault. Det...
The 2003 Ms6.1 Minle Earthquake: An Earthquake in the Minle-Yongchang Reverse Fault-Related Fold Belt in the Hexi Corridor, NW China
The 2003 Ms6.1 Minle Earthquake: An Earthquake in the Minle-Yongchang Reverse Fault-Related Fold Belt in the Hexi Corridor, NW China
The Minle-Yongchang fault is an active reverse fault-related fold structural belt developed in the Hexi Corridor Basin on the northeastern edge of the Tibetan Plateau. An earthquak...
Integration Techniques of Fault Detection and Isolation Using Interval Observers
Integration Techniques of Fault Detection and Isolation Using Interval Observers
An interval observer has been illustrated to be a suitable approach to detect and isolate faults affecting complex dynamical industrial systems.
Concerning fault detection, interv...
=== PAPER RETRACTED === === PAPER RETRACTED === === PAPER RETRACTED === === PAPER RETRACTED === === PAPER RETRACTED === === PAPER RETRACTED === Knowledge of the Problem and Intention to Act on Student Environmentally Responsible Behavior
=== PAPER RETRACTED === === PAPER RETRACTED === === PAPER RETRACTED === === PAPER RETRACTED === === PAPER RETRACTED === === PAPER RETRACTED === Knowledge of the Problem and Intention to Act on Student Environmentally Responsible Behavior
<p><span lang="IN"><span style="vertical-align: inherit;"><span style="vertical-align: inherit;">=== PAPER RETRACTED === </span></span></span...
Characteristics of Jurassic Strike-slip Faults in Block 4 in Junggar Basin and Their Relationship with Hydrocarbon Distribution
Characteristics of Jurassic Strike-slip Faults in Block 4 in Junggar Basin and Their Relationship with Hydrocarbon Distribution
Junggar Basin, located in the northern Xinjiang, is one of the most important oil and gas bearing sedimentary basins in China. Zhong-4 Block, located in Fukang Sag at the southern ...

