Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

A 3P4SW Based UPQC to Improve Power Quality in Medium Voltage Distribution System

View through CrossRef
Abstract The adverse effect of power quality issues on power distribution system due to power electronics based controllers has tremendously increased in the modern power system; therfore, it is highly desired to design a novel power quality conditioner with a minimum number of switches to compensate voltage and current distortions. This proposed configuration reduces switching losses and also effectively alleviates the performance of the power quality conditioner. This paper introduces a configuration of 3P4SW (Three Phase Four Switch) UPQC (Unified Power Quality Conditioner) for both shunt and series APF (Active Power Filter) which can be implemented in medium voltage power grid. The major challenge of phase balance with only four switches in UPQC is accomplished by adaptive Self-tuning PID using neuro-fuzzy logic control and adaptive reference current generation scheme. This controller improves sag and swells compensation with better angle control via shunt and series converter performance and passive components design. The efficacy of proposed topology is tested on MATLAB/Simulink software and results are compared with the existing three phase six switch configuration (3P6SW).
Title: A 3P4SW Based UPQC to Improve Power Quality in Medium Voltage Distribution System
Description:
Abstract The adverse effect of power quality issues on power distribution system due to power electronics based controllers has tremendously increased in the modern power system; therfore, it is highly desired to design a novel power quality conditioner with a minimum number of switches to compensate voltage and current distortions.
This proposed configuration reduces switching losses and also effectively alleviates the performance of the power quality conditioner.
This paper introduces a configuration of 3P4SW (Three Phase Four Switch) UPQC (Unified Power Quality Conditioner) for both shunt and series APF (Active Power Filter) which can be implemented in medium voltage power grid.
The major challenge of phase balance with only four switches in UPQC is accomplished by adaptive Self-tuning PID using neuro-fuzzy logic control and adaptive reference current generation scheme.
This controller improves sag and swells compensation with better angle control via shunt and series converter performance and passive components design.
The efficacy of proposed topology is tested on MATLAB/Simulink software and results are compared with the existing three phase six switch configuration (3P6SW).

Related Results

Mitigation of Reactive Power and Harmonics in a Case of Industrial Customer
Mitigation of Reactive Power and Harmonics in a Case of Industrial Customer
In most industrial plants, power quality is a major issue which hinders productivity and efficiency of the plants due to the use of semiconductor based loads and non-linear loads. ...
Synchronized Control Strategy of UPQC to Mitigate the Sag and Swell of Voltage
Synchronized Control Strategy of UPQC to Mitigate the Sag and Swell of Voltage
AbstractThis paper demonstrates efficacy of the control strategy of Unified Power Quality Conditioner (UPQC) for improvement of three‐phase power quality. UPQC contains a couple of...
Three Dimensional Simulations in Real Time for Personalized Drug Release Prosthesis Used in Lumbosacral Rehabilitation
Three Dimensional Simulations in Real Time for Personalized Drug Release Prosthesis Used in Lumbosacral Rehabilitation
This paper presents a theoretical method for simulation and three-dimensional reconstruction of the anatomical elements of the spine in order to achieve hydrogel disc prosthesis by...
Constantinople as 'New Rome'
Constantinople as 'New Rome'
<!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Revision>0</o:Revision> <o:TotalTime>0</o:TotalTime> <o:Pages>1</o:Pages> &...

Back to Top