Javascript must be enabled to continue!
Estimation of viscosity for some silicate ternary slags
View through CrossRef
A new method, combining KTH model with geometrical model (General solution
model by Chou) to estimate viscosity of some ternary silicate slags, was
proposed in this work. According to modified KTH model, viscous Gibbs free
energy for mixing of ternary slags was estimated by employing general
solution model. It was found that viscous Gibbs energy for mixing of ternary
system could be calculated using solely viscous Gibbs energy for mixing of
sub-binary systems. The viscosities of five ternary slags CaO-MnO-SiO2,
CaO-FeO-SiO2, FeO-MnO-SiO2, CaO-MgO-SiO2 and FeO-MgO-SiO2 were estimated in
the present work. A good agreement with available experimental data, with
mean deviation less than 20%, was achieved. The modified KTH model has
advantages with less model parameters and improved estimation ability by
comparison to original KTH model.
National Library of Serbia
Title: Estimation of viscosity for some silicate ternary slags
Description:
A new method, combining KTH model with geometrical model (General solution
model by Chou) to estimate viscosity of some ternary silicate slags, was
proposed in this work.
According to modified KTH model, viscous Gibbs free
energy for mixing of ternary slags was estimated by employing general
solution model.
It was found that viscous Gibbs energy for mixing of ternary
system could be calculated using solely viscous Gibbs energy for mixing of
sub-binary systems.
The viscosities of five ternary slags CaO-MnO-SiO2,
CaO-FeO-SiO2, FeO-MnO-SiO2, CaO-MgO-SiO2 and FeO-MgO-SiO2 were estimated in
the present work.
A good agreement with available experimental data, with
mean deviation less than 20%, was achieved.
The modified KTH model has
advantages with less model parameters and improved estimation ability by
comparison to original KTH model.
Related Results
Silicate application decreased methane emission from paddy soil under elevated UV‐B radiation
Silicate application decreased methane emission from paddy soil under elevated UV‐B radiation
AbstractA pot experiment was conducted to investigate the effects of silicate application quantity and silicate fertilizer type on rice growth and methane (CH4) emission under elev...
Effect of Long-Term Storage of Silicate Brick in Water on its Strength
Effect of Long-Term Storage of Silicate Brick in Water on its Strength
The article is devoted to the study of long-term storage of silicate brick in stationary water conditions on its strength and phase composition. The relevance of these studies is d...
Investigation of the hydration process and biological activity of a novel nanosilver incorporated dicalcium silicate based retrograde filling material
Investigation of the hydration process and biological activity of a novel nanosilver incorporated dicalcium silicate based retrograde filling material
Background
Although several materials have been used for retrograde filling following apical surgeries, there is no consensus on a single best material. Tricalcium s...
Fayalitic Minerals and Slags (Part II): Physical Properties and Metal Distribution Simulation
Fayalitic Minerals and Slags (Part II): Physical Properties and Metal Distribution Simulation
Abstract
The interaction between fayalitic slags and nonferrous metals during smelting presents a multifaceted challenge that necessitates co...
Viscosities of Slags ‐ an Overview
Viscosities of Slags ‐ an Overview
Viscosities of slags constitute an important physical property needed for an understanding of the mass transfer phenomena in metallurgical processes. Viscosity is also the key that...
Anaerobic Thermal Stability Testing of Polymers Under High Salinity and Temperature Conditions for EOR Applications
Anaerobic Thermal Stability Testing of Polymers Under High Salinity and Temperature Conditions for EOR Applications
Abstract
Enhanced oil recovery (EOR) is a technique used to increase oil production from a reservoir. This study primarily focuses on chemical EOR using polymer f...
Sulfur distribution ratio in iron and steelmaking slags
Sulfur distribution ratio in iron and steelmaking slags
The sulfur distribution ratio (Ls) is an expression of the amount of sulfur in slag to the amount of sulfur in molten metal. The sulfide capacities calculated from Reddy-Blander (R...
Generated Fuzzy Quasi-ideals in Ternary Semigroups
Generated Fuzzy Quasi-ideals in Ternary Semigroups
Here in this paper, we provide characterizations of fuzzy quasi-ideal in terms of level and strong level subsets. Along with it, we provide expression for the generated fuzzy quasi...

