Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Study of High Power Dynamic Charging System

View through CrossRef
<div class="section abstract"><div class="htmlview paragraph">The use of electric vehicles (EV) is becoming more widespread as a response to global warming. The major issues associated with EV are the annoyance represented by charging the vehicles and their limited cruising range. In an attempt to remove the restrictions on the cruising range of EV, the research discussed in this paper developed a dynamic charging EV and low-cost infrastructure that would make it possible for the vehicles to charge by receiving power directly from infrastructure while in motion.</div><div class="htmlview paragraph">Based on considerations of the effect of electromagnetic waves, charging power, and the amount of power able to be supplied by the system, this development focused on a contact-type charging system. The use of a wireless charging system would produce concerns over danger due to the infiltration of foreign matter into the primary and secondary coils and the health effects of leakage flux. Because of this, a contact-type charging system was judged to also present advantages from the perspective of safety. With regard to fixing the positioning of the power collection equipment, pushing the twin rollers of the power collection arm horizontally against positive and negative conductor rails arranged in a V-shaped configuration fixes the power collection unit at the height of the rails.</div><div class="htmlview paragraph">Driving tests have already been conducted using the system to supply 180 kW of power (DC 600 V, 300 A) at vehicle speeds of more than 156 km/h during charging. Development is proceeding, with a view toward supplying 450 kW of power (DC 750 V, 600 A) at a vehicle speed of 200 km/h during charging.</div><div class="htmlview paragraph">If the system were introduced to expressways, the supply of 450 kW of power would represent a ratio of vehicle cruising range to charging lane length of 25:1. This would mean that the restrictions on EV cruising range could be removed by the installation of approximately two kilometers of charging lane per 50 km. It is estimated that the infrastructure installation cost in this case would be around 1/20 that of the cost for installation of wireless charging equipment.</div><div class="htmlview paragraph">The authors’ previous report, published in 2014, discussed a dynamic charging system supplying 100 kW of power (DC 375 V, 300 A) at a vehicle speed of 70km/h during charging, and presented the results of driving tests (<span class="xref">1</span>).</div><div class="htmlview paragraph">This report will discuss the results of driving tests conducted using 180 kW of power (DC 600 V, 300 A) supplied at a higher vehicle speed (156 km/h) and the future outlook for the system. <figure id="F1" class="figure"><div class="graphic-wrapper"><img class="article-figure figure" src="2017-01-1245_fig0001.jpg" alt="Dynamic charging lane and vehicle"/></div><span class="label">Figure 1</span><figcaption class="caption"><span class="title">Dynamic charging lane and vehicle</span></figcaption></figure><figure id="F2" class="figure"><div class="graphic-wrapper"><img class="article-figure figure" src="2017-01-1245_fig0002.jpg" alt="EV cruising range"/></div><span class="label">Figure 2</span><figcaption class="caption"><span class="title">EV cruising range</span></figcaption></figure></div></div>
Title: Study of High Power Dynamic Charging System
Description:
<div class="section abstract"><div class="htmlview paragraph">The use of electric vehicles (EV) is becoming more widespread as a response to global warming.
The major issues associated with EV are the annoyance represented by charging the vehicles and their limited cruising range.
In an attempt to remove the restrictions on the cruising range of EV, the research discussed in this paper developed a dynamic charging EV and low-cost infrastructure that would make it possible for the vehicles to charge by receiving power directly from infrastructure while in motion.
</div><div class="htmlview paragraph">Based on considerations of the effect of electromagnetic waves, charging power, and the amount of power able to be supplied by the system, this development focused on a contact-type charging system.
The use of a wireless charging system would produce concerns over danger due to the infiltration of foreign matter into the primary and secondary coils and the health effects of leakage flux.
Because of this, a contact-type charging system was judged to also present advantages from the perspective of safety.
With regard to fixing the positioning of the power collection equipment, pushing the twin rollers of the power collection arm horizontally against positive and negative conductor rails arranged in a V-shaped configuration fixes the power collection unit at the height of the rails.
</div><div class="htmlview paragraph">Driving tests have already been conducted using the system to supply 180 kW of power (DC 600 V, 300 A) at vehicle speeds of more than 156 km/h during charging.
Development is proceeding, with a view toward supplying 450 kW of power (DC 750 V, 600 A) at a vehicle speed of 200 km/h during charging.
</div><div class="htmlview paragraph">If the system were introduced to expressways, the supply of 450 kW of power would represent a ratio of vehicle cruising range to charging lane length of 25:1.
This would mean that the restrictions on EV cruising range could be removed by the installation of approximately two kilometers of charging lane per 50 km.
It is estimated that the infrastructure installation cost in this case would be around 1/20 that of the cost for installation of wireless charging equipment.
</div><div class="htmlview paragraph">The authors’ previous report, published in 2014, discussed a dynamic charging system supplying 100 kW of power (DC 375 V, 300 A) at a vehicle speed of 70km/h during charging, and presented the results of driving tests (<span class="xref">1</span>).
</div><div class="htmlview paragraph">This report will discuss the results of driving tests conducted using 180 kW of power (DC 600 V, 300 A) supplied at a higher vehicle speed (156 km/h) and the future outlook for the system.
<figure id="F1" class="figure"><div class="graphic-wrapper"><img class="article-figure figure" src="2017-01-1245_fig0001.
jpg" alt="Dynamic charging lane and vehicle"/></div><span class="label">Figure 1</span><figcaption class="caption"><span class="title">Dynamic charging lane and vehicle</span></figcaption></figure><figure id="F2" class="figure"><div class="graphic-wrapper"><img class="article-figure figure" src="2017-01-1245_fig0002.
jpg" alt="EV cruising range"/></div><span class="label">Figure 2</span><figcaption class="caption"><span class="title">EV cruising range</span></figcaption></figure></div></div>.

Related Results

Dynamic Charging Method for Fast Charging of Lithium-Ion Batteries and State of Health Estimation
Dynamic Charging Method for Fast Charging of Lithium-Ion Batteries and State of Health Estimation
Lithium-ion batteries (LIBs) are widely used in electric vehicles (EVs) due to their excellent characteristics, including high energy density, energy efficiency, long cycle life, a...
Automated charging of electric cars for improving user experience and charging infrastructure utilization
Automated charging of electric cars for improving user experience and charging infrastructure utilization
The number of electric cars on the roads is steadily increasing and it is expected that the markets of battery-electric vehicles will experience an accelerated growth during the up...
Modeling EV Charging Station Loads Considering On-Road Wireless Charging Capabilities
Modeling EV Charging Station Loads Considering On-Road Wireless Charging Capabilities
Electric vehicle (EV) customers are expected to charge EV batteries at a rapid EV charging station or via on-road wireless EV charging systems when possible, as per their charging ...
IoT-Based Intelligent Charging System for Kayoola EVs Buses at Kiira Motors Corporation in Uganda
IoT-Based Intelligent Charging System for Kayoola EVs Buses at Kiira Motors Corporation in Uganda
Abstract The increasing popularity of Electric Vehicles (EVs) has led to a surge in the need for charging stations in Kayoola EV buses. Most of existing EV charging station...
Electric Vehicle Charging Station Site
Electric Vehicle Charging Station Site
Abstract: With the rapid adoption of electric vehicles (EVs) worldwide, the demand for efficient and accessible charging infrastructure has become increasingly significant. Electri...
Power System Impacts of Electric Vehicle Charging Strategies
Power System Impacts of Electric Vehicle Charging Strategies
This article explores the potential impacts of integrating electric vehicles (EVs) and variable renewable energy (VRE) on power system operation. EVs and VRE are integrated in a pr...
Enhancing electromagnetic compatibility and energy efficiency of electric vehicle charging stations
Enhancing electromagnetic compatibility and energy efficiency of electric vehicle charging stations
Problem. The article proposes a single-link structure for an electric vehicle charging station utilizing an active four-square rectifier with power factor correction. A Matlab mode...
A Review of the Development of Power Converters and Controls for Fast Charging Electric Vehicles
A Review of the Development of Power Converters and Controls for Fast Charging Electric Vehicles
The review explores the development of advanced power converter topologies and control strategies for high-power fast-charging systems in electric vehicles (EVs). Fast-charging sys...

Back to Top