Javascript must be enabled to continue!
Enthalpies of mixing in ternary Al–Gd–Mn liquid alloys
View through CrossRef
Abstract
The enthalpies of mixing in liquid alloys of the ternary Al–Gd–Mn system were determined over a wide range of compositions by means of isoperibolic calorimetry at 1650 K. The measurements of the partial enthalpies of components were performed along five sections: for the ΔH̅
Al (sections with x
Gd/x
Mn = 0.30/0.70 and 0.65/0.35 for x
Al changed from 0 up to 0.30); for the ΔH̅
Gd (x
Al/x
Mn = 0.80/ 0.20 and 0.50/0.50 for x
Gd changed from 0 up to 0.30); for the ΔH̅
Mn (x
Al/x
Gd = 0.29/0.71 for x
Mn changed from 0 up to 0.26). The enthalpies of mixing in the ternary system were found to be exothermic and steadily increasing in absolute values from the Mn corner towards the Al–Gd constituent binary system, reaching the minimum value of approximately – 37 kJ · mol–1 in the vicinity of the Al0.6Gd0.4 composition, evidently related to the formation of stable Al2Gd phase.
Walter de Gruyter GmbH
Title: Enthalpies of mixing in ternary Al–Gd–Mn liquid alloys
Description:
Abstract
The enthalpies of mixing in liquid alloys of the ternary Al–Gd–Mn system were determined over a wide range of compositions by means of isoperibolic calorimetry at 1650 K.
The measurements of the partial enthalpies of components were performed along five sections: for the ΔH̅
Al (sections with x
Gd/x
Mn = 0.
30/0.
70 and 0.
65/0.
35 for x
Al changed from 0 up to 0.
30); for the ΔH̅
Gd (x
Al/x
Mn = 0.
80/ 0.
20 and 0.
50/0.
50 for x
Gd changed from 0 up to 0.
30); for the ΔH̅
Mn (x
Al/x
Gd = 0.
29/0.
71 for x
Mn changed from 0 up to 0.
26).
The enthalpies of mixing in the ternary system were found to be exothermic and steadily increasing in absolute values from the Mn corner towards the Al–Gd constituent binary system, reaching the minimum value of approximately – 37 kJ · mol–1 in the vicinity of the Al0.
6Gd0.
4 composition, evidently related to the formation of stable Al2Gd phase.
Related Results
Enthalpies of mixing in binary Mn–In and ternary Mn–In–Gd liquid alloys
Enthalpies of mixing in binary Mn–In and ternary Mn–In–Gd liquid alloys
AbstractThe enthalpies of mixing in liquid alloys of the binary Mn–In and ternary Mn–In–Gd systems were determined over a wide range of compositions by means of isoperibolic calori...
Enthalpies of Mixing in the Binary Liquid Systems Alk(Cl–Br), Alk(Cl–I), and Alk(Br–I)
Enthalpies of Mixing in the Binary Liquid Systems Alk(Cl–Br), Alk(Cl–I), and Alk(Br–I)
The enthalpies of mixing in the A(X–Y) binary liquid alkali halide mixtures have been measured by high-temperature reaction calorimetry (A denotes Li–Cs; X, Y denote Cl, Br, I). Al...
Detecting lake mixing anomalies using Earth Observation
Detecting lake mixing anomalies using Earth Observation
Lakes are responding rapidly to climate change and one of the most tangible responses is the increase in lake surface water temperature. Such an increase can intensify thermal stra...
Generated Fuzzy Quasi-ideals in Ternary Semigroups
Generated Fuzzy Quasi-ideals in Ternary Semigroups
Here in this paper, we provide characterizations of fuzzy quasi-ideal in terms of level and strong level subsets. Along with it, we provide expression for the generated fuzzy quasi...
Mixing time of homogeneous/heterogeneous solutions in a micro-mixer with free impinging jets
Mixing time of homogeneous/heterogeneous solutions in a micro-mixer with free impinging jets
We have developed a micro-mixer based on a free impinging liquid-sheet jet technique. We identified a mixing position where two different solutions mixed uniformly and evaluated a ...
Corrosion Protection Application of Liquid-Infused Surface with Regional Growth of LDH Films on Al Alloys
Corrosion Protection Application of Liquid-Infused Surface with Regional Growth of LDH Films on Al Alloys
Al alloys with their easy accessibility and good workability have been extensively used in oceanic engineering area [1]. However, corrosion failure of Al alloys is a major challeng...
Significant Step Towards Efficient Electrical Discharge Machining Titanium Alloys
Significant Step Towards Efficient Electrical Discharge Machining Titanium Alloys
Abstract
There have been high demands of high-quality, highly efficient processing methodologies on "difficult-to-cut" titanium alloys. The current methods for dealing with...
Quantitative Phase Analysis of Aluminium-Lithium Alloys
Quantitative Phase Analysis of Aluminium-Lithium Alloys
A quantitative approach to the determination of the phase composition in the Al-Mg (Cu)-Li alloys has been developed on the basis of the balance equations of chemical and phase com...

