Javascript must be enabled to continue!
Enthalpies of mixing in binary Mn–In and ternary Mn–In–Gd liquid alloys
View through CrossRef
AbstractThe enthalpies of mixing in liquid alloys of the binary Mn–In and ternary Mn–In–Gd systems were determined over a wide range of compositions by means of isoperibolic calorimetry in the temperature range 1 500 – 1 650 K. The enthalpies of mixing in the Mn–In system demonstrate endothermic effects (ΔHmax = 4.66 ± 0.38 kJ · mol−1 at xIn = 0.40). The enthalpies of mixing in the liquid ternary Mn–In–Gd alloys were determined along six sections (xMn/xIn = 0.22/0.78; 0.44/0.56; 0.65/0.35 and 0.83/0.17 for xGd changed from 0 up to 0.5 and xMn/xGd = 0.30/0.70; 0.60/0.40 for xIn changed from 0 up to 0.3). Enthalpies of mixing in the ternary system were found to be predominantly exothermic and steadily increasing in absolute values towards the Gd–In boundary binary system, reaching the maximum value in the vicinity of the phase GdIn.
Walter de Gruyter GmbH
Title: Enthalpies of mixing in binary Mn–In and ternary Mn–In–Gd liquid alloys
Description:
AbstractThe enthalpies of mixing in liquid alloys of the binary Mn–In and ternary Mn–In–Gd systems were determined over a wide range of compositions by means of isoperibolic calorimetry in the temperature range 1 500 – 1 650 K.
The enthalpies of mixing in the Mn–In system demonstrate endothermic effects (ΔHmax = 4.
66 ± 0.
38 kJ · mol−1 at xIn = 0.
40).
The enthalpies of mixing in the liquid ternary Mn–In–Gd alloys were determined along six sections (xMn/xIn = 0.
22/0.
78; 0.
44/0.
56; 0.
65/0.
35 and 0.
83/0.
17 for xGd changed from 0 up to 0.
5 and xMn/xGd = 0.
30/0.
70; 0.
60/0.
40 for xIn changed from 0 up to 0.
3).
Enthalpies of mixing in the ternary system were found to be predominantly exothermic and steadily increasing in absolute values towards the Gd–In boundary binary system, reaching the maximum value in the vicinity of the phase GdIn.
Related Results
Enthalpies of mixing in ternary Al–Gd–Mn liquid alloys
Enthalpies of mixing in ternary Al–Gd–Mn liquid alloys
Abstract
The enthalpies of mixing in liquid alloys of the ternary Al–Gd–Mn system were determined over a wide range of compositions by means of isoperibolic calorime...
Enthalpies of Mixing in the Binary Liquid Systems Alk(Cl–Br), Alk(Cl–I), and Alk(Br–I)
Enthalpies of Mixing in the Binary Liquid Systems Alk(Cl–Br), Alk(Cl–I), and Alk(Br–I)
The enthalpies of mixing in the A(X–Y) binary liquid alkali halide mixtures have been measured by high-temperature reaction calorimetry (A denotes Li–Cs; X, Y denote Cl, Br, I). Al...
Detecting lake mixing anomalies using Earth Observation
Detecting lake mixing anomalies using Earth Observation
Lakes are responding rapidly to climate change and one of the most tangible responses is the increase in lake surface water temperature. Such an increase can intensify thermal stra...
Generated Fuzzy Quasi-ideals in Ternary Semigroups
Generated Fuzzy Quasi-ideals in Ternary Semigroups
Here in this paper, we provide characterizations of fuzzy quasi-ideal in terms of level and strong level subsets. Along with it, we provide expression for the generated fuzzy quasi...
Enthalpies of Mixing of Multicomponent Alkane Mixtures
Enthalpies of Mixing of Multicomponent Alkane Mixtures
Enthalpies of mixing are reported for ternary n-alkane mixtures prepared from binary mixtures with large chain-length differences and at temperatures where the enthalpies of mixing...
Mixing time of homogeneous/heterogeneous solutions in a micro-mixer with free impinging jets
Mixing time of homogeneous/heterogeneous solutions in a micro-mixer with free impinging jets
We have developed a micro-mixer based on a free impinging liquid-sheet jet technique. We identified a mixing position where two different solutions mixed uniformly and evaluated a ...
Corrosion Protection Application of Liquid-Infused Surface with Regional Growth of LDH Films on Al Alloys
Corrosion Protection Application of Liquid-Infused Surface with Regional Growth of LDH Films on Al Alloys
Al alloys with their easy accessibility and good workability have been extensively used in oceanic engineering area [1]. However, corrosion failure of Al alloys is a major challeng...
A Mathematical Calculation Model Using Biomarkers to Quantitatively Determine the Relative Source Proportion of Mixed Oils
A Mathematical Calculation Model Using Biomarkers to Quantitatively Determine the Relative Source Proportion of Mixed Oils
Abstract: It is difficult to identify the source(s) of mixed oils from multiple source rocks, and in particular the relative contribution of each source rock. Artificial mixing exp...

