Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Elasto‐plastic Analysis of Fracture Specimens using the Boundary Element Method
View through CrossRef
AbstractIn general crack problem, the geometry and loading encountered are too complex for the determination of the fracture parameters analytically. To this end, numerical methods have been developed as possible solution. The boundary element method, used in this paper is one of the powerful numerical methods. An elasto‐plastic analysis of fracture specimens is performed. The welded specimen fracture behaviour and its deviation regarding the parent material is investigated. The obtained results are compared whit the experimental results and the results given by FEM.
Title: Elasto‐plastic Analysis of Fracture Specimens using the Boundary Element Method
Description:
AbstractIn general crack problem, the geometry and loading encountered are too complex for the determination of the fracture parameters analytically.
To this end, numerical methods have been developed as possible solution.
The boundary element method, used in this paper is one of the powerful numerical methods.
An elasto‐plastic analysis of fracture specimens is performed.
The welded specimen fracture behaviour and its deviation regarding the parent material is investigated.
The obtained results are compared whit the experimental results and the results given by FEM.
Related Results
Stochastic Propagation of Discrete Fracture Networks
Stochastic Propagation of Discrete Fracture Networks
This reference is for an abstract only. A full paper was not submitted for this conference.
Abstract
Fractures are ubiquitous st...
Sequential Propagation of Multiple Fractures in Horizontal Wells
Sequential Propagation of Multiple Fractures in Horizontal Wells
ABSTRACT:
Simultaneous fracturing and zipper fracturing of horizontal wells has rapidly evolved to the development of unconventional oil and gas. The fracture int...
Fracture Modelling Using Seismic Based Fracture Intensity Volume, a Case Study in Middle East
Fracture Modelling Using Seismic Based Fracture Intensity Volume, a Case Study in Middle East
Abstract
In this paper, a case study in a fractured carbonate reservoir is presented to demonstrate the approach of fracture modeling using fracture intensity vol...
Experimental Investigation on the Effects of Proppant Migration and Placement on the Conductivity in Rough Fractures
Experimental Investigation on the Effects of Proppant Migration and Placement on the Conductivity in Rough Fractures
ABSTRACT
Proppant conductivity was usually measured under static or designed proppant concentration. The ISO 13503-5 standard provides specific experimental proce...
Blunt Chest Trauma and Chylothorax: A Systematic Review
Blunt Chest Trauma and Chylothorax: A Systematic Review
Abstract
Introduction: Although traumatic chylothorax is predominantly associated with penetrating injuries, instances following blunt trauma, as a rare and challenging condition, ...
Quantifying the Sensitivity of Dielectric Dispersion Data to Fracture Properties in Fractured Rocks
Quantifying the Sensitivity of Dielectric Dispersion Data to Fracture Properties in Fractured Rocks
Evaluation of fluid storage and flow capacity of a fractured rock system needs a comprehensive characterization of all the fracture properties. These properties include the fractur...
3791 Rising burden of pelvic fracture: a need for prompt identification to minimise harm
3791 Rising burden of pelvic fracture: a need for prompt identification to minimise harm
Abstract
Introduction
Pelvic fractures are a common fragility fracture, associated with adverse clinical outcome but ofte...
Proppant Transport
Proppant Transport
Novotny, E.J., Member of SPE-AIME, Exxon Production Research Co.
Abstract
A method is presented for predicting:the transport of ...