Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Development of Low PcBN Composites by SPS
View through CrossRef
Cubic boron nitride (cBN) is normally used as the hardest phase of composites, together with ceramic and/or metallic matrixes, to form PcBN (Polycrystalline cubic Boron Nitride) materials applied in machining and finishing operations. While high PcBN (70–90 vol% cBN) is only produced by HPHT (High Pressure High Temperature) techniques, low PcBN (40–70 vol% cBN) can also be consolidated by SPS (Spark Plasma Sintering) since higher volume of binders are present. In this work, a cBN micrometer powder is combined with TiCN and Ni to produce composites with hard matrix phases, predicted by the calculated phase diagram. The SPS technique is used for the thermal consolidation of different PcBN compositions with a varied content of Ni, up to 15 vol%. A structural and microstructural characterization of the PcBN composites was performed for different compositions and maximum SPS temperatures.
Title: Development of Low PcBN Composites by SPS
Description:
Cubic boron nitride (cBN) is normally used as the hardest phase of composites, together with ceramic and/or metallic matrixes, to form PcBN (Polycrystalline cubic Boron Nitride) materials applied in machining and finishing operations.
While high PcBN (70–90 vol% cBN) is only produced by HPHT (High Pressure High Temperature) techniques, low PcBN (40–70 vol% cBN) can also be consolidated by SPS (Spark Plasma Sintering) since higher volume of binders are present.
In this work, a cBN micrometer powder is combined with TiCN and Ni to produce composites with hard matrix phases, predicted by the calculated phase diagram.
The SPS technique is used for the thermal consolidation of different PcBN compositions with a varied content of Ni, up to 15 vol%.
A structural and microstructural characterization of the PcBN composites was performed for different compositions and maximum SPS temperatures.
Related Results
Single Prolonged Stress Alters Vasopressin and Orexin System Expression in Sprague Dawley Rats
Single Prolonged Stress Alters Vasopressin and Orexin System Expression in Sprague Dawley Rats
Posttraumatic stress disorder (PTSD) is a complex psychiatric disorder triggered by a terrifying event, causing severe anxiety and nightmares. Studies showed that patients with PTS...
Effect of Ti<sub>2</sub>AlC/Al Binder Content on the Mechanical Properties of Sintered PcBN
Effect of Ti<sub>2</sub>AlC/Al Binder Content on the Mechanical Properties of Sintered PcBN
In this study, Polycrystalline cubic boron nitride (PcBN) composites were successfully synthesized via high-pressure and high-temperature (HPHT) sintering at 5.5 GPa and 1500 °C, u...
Inactivation of the polyanionic detergent sodium polyanetholsulfonate by hemoglobin
Inactivation of the polyanionic detergent sodium polyanetholsulfonate by hemoglobin
Sodium polyanetholsulfonate (SPS) has been added to blood culture media for many years. Its incorporation results in a higher yield of positive blood cultures due to its inactivati...
Association of Genetic Variability in Selected Genes with Platelet Hyperaggregability and Arterial Thrombosis
Association of Genetic Variability in Selected Genes with Platelet Hyperaggregability and Arterial Thrombosis
Abstract
Introduction: Inherited platelet hyperaggregability, so called “Sticky platelet syndrome” (SPS), is a prothrombotic platelet disorder. Th...
Substitution Effects Between Agricultural Tariffs and SPS Measures: Evidence from the Structural Characteristics of Measures
Substitution Effects Between Agricultural Tariffs and SPS Measures: Evidence from the Structural Characteristics of Measures
The continuous reduction in agricultural tariffs alongside the rising number of SPS notifications indicates potential substitution effects between these two trade policies. While S...
Mechanical properties of syndiotactic polystyrene polymer blend
Mechanical properties of syndiotactic polystyrene polymer blend
This research is concemed with studying the mechanical properties of syndiotactic polystyrene (sPS) blend with several polymers such as poly (a-methyl styrene) (PaMS), poly (ethyl ...
Mechanical Properties of GF/CF Hybrid ABS Composite by DFFIM
Mechanical Properties of GF/CF Hybrid ABS Composite by DFFIM
GF reinforced polymer composites to improve the mechanical properties by increasing fiber content, but there is a limit. On the contrary, CF reinforced polymer composites are super...
Physico-Mechanical Behaviors of Chemically Treated Natural Fibers Reinforced Hybrid Polypropylene Composites
Physico-Mechanical Behaviors of Chemically Treated Natural Fibers Reinforced Hybrid Polypropylene Composites
The goal of current research is to replace synthetic materials with natural, biodegradable, and renewable ones. Natural fiber composites are extensively studied due to their unique...