Javascript must be enabled to continue!
High Oxygen Sensitivity of TiO2 Thin Films Deposited by ALD
View through CrossRef
The gas sensitivity and structural properties of TiO2 thin films deposited by plasma-enhanced atomic layer deposition (ALD) were examined in detail. The TiO2 thin films are deposited using Tetrakis(dimethylamido)titanium(IV) and oxygen plasma at 300 °C on SiO2 substrates followed by annealing at temperatures of 800 °C. Gas sensitivity under exposure to O2 within the temperature range from 30 °C to 700 °C was studied. The ALD-deposited TiO2 thin films demonstrated high responses to O2 in the dynamic range from 0.1 to 100 vol. % and low concentrations of H2, NO2. The ALD deposition allowed the enhancement of sensitivity of TiO2 thin films to gases. The greatest response of TiO2 thin films to O2 was observed at a temperature of 500 °C and was 41.5 arb. un. under exposure to 10 vol. % of O2. The responses of TiO2 thin films to 0.1 vol. % of H2 and 7 × 10–4 vol. % of NO2 at a temperature of 500 °C were 10.49 arb. un. and 10.79 arb. un., correspondingly. The resistance of the films increased due to the chemisorption of oxygen molecules on their surface that decreased the thickness of the conduction channel between the metal contacts. It was suggested that there are two types of adsorption centers on the TiO2 thin films surface: oxygen is chemisorbed in the form of O2– on the first one and O– on the second one.
Title: High Oxygen Sensitivity of TiO2 Thin Films Deposited by ALD
Description:
The gas sensitivity and structural properties of TiO2 thin films deposited by plasma-enhanced atomic layer deposition (ALD) were examined in detail.
The TiO2 thin films are deposited using Tetrakis(dimethylamido)titanium(IV) and oxygen plasma at 300 °C on SiO2 substrates followed by annealing at temperatures of 800 °C.
Gas sensitivity under exposure to O2 within the temperature range from 30 °C to 700 °C was studied.
The ALD-deposited TiO2 thin films demonstrated high responses to O2 in the dynamic range from 0.
1 to 100 vol.
% and low concentrations of H2, NO2.
The ALD deposition allowed the enhancement of sensitivity of TiO2 thin films to gases.
The greatest response of TiO2 thin films to O2 was observed at a temperature of 500 °C and was 41.
5 arb.
un.
under exposure to 10 vol.
% of O2.
The responses of TiO2 thin films to 0.
1 vol.
% of H2 and 7 × 10–4 vol.
% of NO2 at a temperature of 500 °C were 10.
49 arb.
un.
and 10.
79 arb.
un.
, correspondingly.
The resistance of the films increased due to the chemisorption of oxygen molecules on their surface that decreased the thickness of the conduction channel between the metal contacts.
It was suggested that there are two types of adsorption centers on the TiO2 thin films surface: oxygen is chemisorbed in the form of O2– on the first one and O– on the second one.
Related Results
Alternative Entrances: Phillip Noyce and Sydney’s Counterculture
Alternative Entrances: Phillip Noyce and Sydney’s Counterculture
Phillip Noyce is one of Australia’s most prominent film makers—a successful feature film director with both iconic Australian narratives and many a Hollywood blockbuster under his ...
Photocatalytic Degradation of Gaseous Benzene Using Cu/Fe-Doped TiO2 Nanocatalysts under Visible Light
Photocatalytic Degradation of Gaseous Benzene Using Cu/Fe-Doped TiO2 Nanocatalysts under Visible Light
Visible-light-enhanced TiO2 nanocatalysts doped with Cu and Fe were synthesized using the sol–gel method to investigate their performance in degrading gaseous benzene. The structur...
The Hydrothermal Synthesis of TiO2-GO with Enhance Photocatalytic Activity
The Hydrothermal Synthesis of TiO2-GO with Enhance Photocatalytic Activity
A composite material consisting of titanium dioxide and graphene oxide (TiO2–GO) was synthesized through a hydrothermal reaction. This reaction involved the use of Ti(SO4)2 in an e...
Performance comparison of dye-sensitized solar cells by using different metal oxide- coated TiO2 as the photoanode
Performance comparison of dye-sensitized solar cells by using different metal oxide- coated TiO2 as the photoanode
In order to increase the conversion efficiency of dye-sensitized solar cells, TiO2 photoanode surface is often covered with a metal oxide layer to form a core-shell composite struc...
High-Performance MEMS Oxygen Sensors Based on Au/TiO2 Films
High-Performance MEMS Oxygen Sensors Based on Au/TiO2 Films
High-performance microelectromechanical system (MEMS) oxygen sensors were realized by successful preparation of Au nanofilms over TiO2 thin films through successive sputtering on c...
Adsorption and Photocatalytic Mineralization of Bromophenol Blue Dye with TiO2 Modified with Clinoptilolite/Activated Carbon
Adsorption and Photocatalytic Mineralization of Bromophenol Blue Dye with TiO2 Modified with Clinoptilolite/Activated Carbon
This study presents a hybridized photocatalyst with adsorbate as a promising nanocomposite for photoremediation of wastewater. Photocatalytic degradation of bromophenol blue (BPB) ...
Atomic Layer Deposition of thin Films Using Sequential Surface Reactions
Atomic Layer Deposition of thin Films Using Sequential Surface Reactions
AbstractThin films can be deposited with atomic layer control using sequential surface reactions. The atomic layer deposition (ALD) of compound and single-element films can be acco...
Spray Coated Nanocellulose Films Productions, Characterization and Application
Spray Coated Nanocellulose Films Productions, Characterization and Application
Nanocellulose (NC) is a biodegradable, renewable and sustainable material. It has strong potential to use as a functional material in various applications such as barriers, coating...

