Javascript must be enabled to continue!
Seismic processing and imaging of the new 2D marine reflection seismic data in the Polish sector of the Baltic Sea
View through CrossRef
<p>Geological structure and tectonics of the Phanerozoic sedimentary cover within the transition zone between the Precambrian and Paleozoic platform in the Polish sector of the Baltic Sea was imaged using new 2D high-resolution multi-channel seismic reflection data. The new seismic data were acquired in 2016 during the course of RV Maria S. Merian expedition MSM52 within the framework of the BALTEC project. Eight profiles (with the total length of ca. 850km) covered the tectonics blocks located within the Polish Exclusive Economic Zone, stretching from the East European Craton (EEC) to the Paleozoic platform across the Teisseyre-Torquist Zone (TTZ).</p><p>Our in-house seismic processing workflow focused on removing multiples contaminating this shallow-water data, both water bottom and interbed related. Various demultiple techniques such as SRME, TAU-P domain deconvolution, high resolution parabolic Radon demultiple and SWDM (Shallow water demultiple) have been tested. Combination of all those techniques at different stages of the processing with some modifications based on a particular seismic profile proved to be the most effective. Consequently, multiples obscuring seismic sections were efficiently reduced. Data were processed up to Kirchhoff pre-stack time migration.</p><p>The longest seismic profile (line BGR16-212, ca. 240 km long) crosses almost perpendicularly majority of Precambrian and Paleozoic fault systems bordering the tectonic blocks of the EEC basement, so fault systems could be easily interpreted. EEC Precambrian basement is characterized by a regional flexure towards the TTZ. Cambrian-Ordovician exhibits similar geometry and is characterized by a relatively constant thickness related to deposition on the Tornquist Ocean passive margin. Thick Silurian succession is characterized by a regional divergent pattern caused by deposition within the Caledonian foredeep basin. Structural pattern within the W part of the study area is much more complex as this area underwent Late Paleozoic extension/transtension, Variscan inversion, Permo-Mesozoic subsidence and Late Cretaceous inversion.</p><p>This study was funded by the Polish National Science Centre grant no UMO-2017/27/B/ST10/02316.</p>
Title: Seismic processing and imaging of the new 2D marine reflection seismic data in the Polish sector of the Baltic Sea
Description:
<p>Geological structure and tectonics of the Phanerozoic sedimentary cover within the transition zone between the Precambrian and Paleozoic platform in the Polish sector of the Baltic Sea was imaged using new 2D high-resolution multi-channel seismic reflection data.
The new seismic data were acquired in 2016 during the course of RV Maria S.
Merian expedition MSM52 within the framework of the BALTEC project.
Eight profiles (with the total length of ca.
850km) covered the tectonics blocks located within the Polish Exclusive Economic Zone, stretching from the East European Craton (EEC) to the Paleozoic platform across the Teisseyre-Torquist Zone (TTZ).
</p><p>Our in-house seismic processing workflow focused on removing multiples contaminating this shallow-water data, both water bottom and interbed related.
Various demultiple techniques such as SRME, TAU-P domain deconvolution, high resolution parabolic Radon demultiple and SWDM (Shallow water demultiple) have been tested.
Combination of all those techniques at different stages of the processing with some modifications based on a particular seismic profile proved to be the most effective.
Consequently, multiples obscuring seismic sections were efficiently reduced.
Data were processed up to Kirchhoff pre-stack time migration.
</p><p>The longest seismic profile (line BGR16-212, ca.
240 km long) crosses almost perpendicularly majority of Precambrian and Paleozoic fault systems bordering the tectonic blocks of the EEC basement, so fault systems could be easily interpreted.
EEC Precambrian basement is characterized by a regional flexure towards the TTZ.
Cambrian-Ordovician exhibits similar geometry and is characterized by a relatively constant thickness related to deposition on the Tornquist Ocean passive margin.
Thick Silurian succession is characterized by a regional divergent pattern caused by deposition within the Caledonian foredeep basin.
Structural pattern within the W part of the study area is much more complex as this area underwent Late Paleozoic extension/transtension, Variscan inversion, Permo-Mesozoic subsidence and Late Cretaceous inversion.
</p><p>This study was funded by the Polish National Science Centre grant no UMO-2017/27/B/ST10/02316.
</p>.
Related Results
Sedimentary nitrogen removal processes across coastal, lagoon and open waters of the Baltic Sea
Sedimentary nitrogen removal processes across coastal, lagoon and open waters of the Baltic Sea
Denitrification and anammox (anaerobic ammonium oxidation) are the main nitrogen removal pathways. Denitrification is a microbial process in which NO3- is sequentially reduced to d...
Observation of a moderate Major Baltic Sea inflow in December 2023
Observation of a moderate Major Baltic Sea inflow in December 2023
Abstract
Just before Christmas 2023, the low-pressure system storm "Zoltan" struck Germany, resulting in widespread damage and two consecutive large storm surges on the Nor...
Seismic Frequency Enhancement for Mapping and Reservoir Characterization of Arab Formation: Case Study Onshore UAE
Seismic Frequency Enhancement for Mapping and Reservoir Characterization of Arab Formation: Case Study Onshore UAE
Abstract
Mapping and discrimination of Upper Jurassic Arab reservoirs (Arab A/B/C and D) in this 3D seismic onshore field of Abu Dhabi, is very sensitive to the seis...
4D Seismic on Gullfaks
4D Seismic on Gullfaks
SUMMARY
New technologies are rapidly emerging helping to obtain optimal drainage of large reservoirs. 4D seismic is such a reservoir monitoring technique. The phy...
Future Directions of Multicomponent Seismic Methods in the Marine Environment
Future Directions of Multicomponent Seismic Methods in the Marine Environment
Abstract
Multicomponent seismic recording (4C) is becoming more common in several offshore seismic applications. Faithfully recording all Cartesian components of ...
Sensitivity of modeled atmospheric nitrogen species and nitrogen deposition to variations in sea salt emissions in the North Sea and Baltic Sea regions
Sensitivity of modeled atmospheric nitrogen species and nitrogen deposition to variations in sea salt emissions in the North Sea and Baltic Sea regions
Abstract. Coarse sea salt particles are emitted ubiquitously from the ocean surface by wave-breaking and bubble-bursting processes. These particles impact the atmospheric chemistry...
On three types of sea breeze in Qingdao of East China: an observational analysis
On three types of sea breeze in Qingdao of East China: an observational analysis
Our knowledge of sea breeze remains poor in the coastal area of East China, due largely to the high terrain heterogeneity. Five–year (2016–2020) consecutive wind observations from ...
The Application of S‐transform Spectrum Decomposition Technique in Extraction of Weak Seismic Signals
The Application of S‐transform Spectrum Decomposition Technique in Extraction of Weak Seismic Signals
AbstractIn processing of deep seismic reflection data, when the frequency band difference between the weak useful signal and noise both from the deep subsurface is very small and h...

