A New Application of Sohrabi Albedo Neutron Dosimeters around a Plasma Focus Device

Abstract A new application of the Sohrabi albedo neutron dosimeters is reported for the first time for determination of very low-level neutron ambient dose equivalents on and around a 3.5 kJ plasma focus device (PFD). The Sohrabi dosimeters basically use a polycarbonate track detector as bare and/or in contact with 10B convertor(s) under special cadmium cover arrangements. Its sensitivity was improved by using enriched 10B under new cadmium arrangements in order to detect epithermal neutrons in addition to fast and thermal neutrons. Results of 12 dosimeters installed externally around the PFD at different azimuthal (φ) and polar (θ) angles showed that azimuthal (φ) fast, epithermal, thermal, and total neutron ambient dose equivalents were symmetric and isotropic, respectively, with values 55.15 ± 8.36, 1.36 ± 02, 0.53 ± 03, and 57.04 ± 8.62 μSv/shot at ~25 cm from anode top. Polar (θ) neutron ambient dose equivalent values on z-axis relative to 90o angle were relatively higher. Results of 38 dosimeters placed on PFD facility walls for workplace monitoring and on a BOMAB phantom at operator’s location for personal dose equivalent determination showed values below minimum detection limits after exposure to 130 PFD shots. However, an operator’s personal dose equivalents at ~1.0 and ~3.0 m from the anode top were estimated to be, respectively, ~13.7 and ~1.52 mSv y−1 using azimuthal angle (φ) values if the PFD operates, for example, up to 20 shots per day for 200 d y−1. Even under such an extreme assumption, annual personal dose equivalent is still much below 20 mSv, the annual ICRP dose limit for workers.