Analysis of Operations upon Entry into Intermodal Freight Terminals

The design of intermodal freight terminals requires extensive research and a thorough analysis of the technical, financial and organizational aspects. In the paper, the operation of the reposition of large cargo containers (one of the types of intermodal transport units, ITUs) on the dedicated places is subjected to a discussion. The analysis is carried out with the use of a vehicle equipped with a telescopic arm, such as a reach stacker. The considered storage facility is reduced to a block characterized by spatial accumulation given in the paper. The description of the procedure for the execution of the handling operation from the arrival of a tractor-trailer with a container into a terminal, followed by the ITUs being set aside in a dedicated place and, in the end, the departure of the truck without load, is given in the paper. The activities are described in detail in order to present a descriptive model of particular operations upon entry to the intermodal freight terminal. Moreover, the paper contains relevant figures illustrating the various steps of realization and the analysis of duration of activities supported by actual realizations. The durations of the individual activities described in the paper are experimental, and the results have been validated on real-world intermodal freight terminals. Therefore, the authors believe that the obtained values may be used in analytical, simulation and numerical models of intermodal freight terminals.