Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Hydraulic properties of sulphoaluminate belite cement based on steelmaking slags
View through CrossRef
Based on modified Bogue calculations, steelmaking slags were combined in order to produce a belite-rich clinker activated with sulphoaluminate. The experiments were conducted on two different mixtures based on steelmaking slags together with additives, namely MixA and MixB. The objective of the present study was to investigate the hydraulic properties of the specimens, using conduction calorimetry, X-ray diffraction and differential scanning calorimetry, and also to measure the mechanical strength of the specimens when hydrated for 2 and 28 days. The compressive strength was satisfactory in relation to the estimated compositions. Both mixtures behaved the same with regard to heat development as well as the amount of ettringite formed during the first 24 h of the hydration.
Title: Hydraulic properties of sulphoaluminate belite cement based on steelmaking slags
Description:
Based on modified Bogue calculations, steelmaking slags were combined in order to produce a belite-rich clinker activated with sulphoaluminate.
The experiments were conducted on two different mixtures based on steelmaking slags together with additives, namely MixA and MixB.
The objective of the present study was to investigate the hydraulic properties of the specimens, using conduction calorimetry, X-ray diffraction and differential scanning calorimetry, and also to measure the mechanical strength of the specimens when hydrated for 2 and 28 days.
The compressive strength was satisfactory in relation to the estimated compositions.
Both mixtures behaved the same with regard to heat development as well as the amount of ettringite formed during the first 24 h of the hydration.
Related Results
Steelmaking slags as raw material for sulphoaluminate belite cement
Steelmaking slags as raw material for sulphoaluminate belite cement
In the present study, slags from the steelmaking industry are described and considered as a potential raw material within the field of sulphoaluminate belite cement. The objective ...
The cement-bone bond is weaker than cement-cement bond in cement-in-cement revision arthroplasty. A comparative biomechanical study
The cement-bone bond is weaker than cement-cement bond in cement-in-cement revision arthroplasty. A comparative biomechanical study
This study compares the strength of the native bone-cement bond and the old-new cement bond under cyclic loading, using third generation cementing technique, rasping and contaminat...
Sulfur distribution ratio in iron and steelmaking slags
Sulfur distribution ratio in iron and steelmaking slags
The sulfur distribution ratio (Ls) is an expression of the amount of sulfur in slag to the amount of sulfur in molten metal. The sulfide capacities calculated from Reddy-Blander (R...
Real-Time Distributed Fiber Optic Sensing for Cement Sheath Integrity Monitoring
Real-Time Distributed Fiber Optic Sensing for Cement Sheath Integrity Monitoring
ABSTRACT:
The integrity of cement sheath is critical to oil and gas effective extraction, in which the cement displacement efficiency and solidify quality are the...
FLY ASH FOUNDATION REINFORCED BY CEMENT–SOIL MIXING PILES
FLY ASH FOUNDATION REINFORCED BY CEMENT–SOIL MIXING PILES
Cement-soil mixing piles have been commonly used to enhance the bearing capacity of fly ash stratum and mitigate the settlement damage to the surrounding environment. However, only...
Behavior of Nano Calcium Carbonate Modified Smart Cement Contaminated with Oil Based Drilling Mud
Behavior of Nano Calcium Carbonate Modified Smart Cement Contaminated with Oil Based Drilling Mud
Abstract
As oil and gas exploration and production expands around the world, there are unique challenges in well construction beginning at the seafloor. There are se...
First Implementation of Self-Healing Cement Systems in H2S/CO2 Aggressive Environment Across Pay-Zone
First Implementation of Self-Healing Cement Systems in H2S/CO2 Aggressive Environment Across Pay-Zone
Abstract
Carbonate reservoirs are often characterized by high pressure and high content of H2S and CO2. For these reasons, drilling the reservoir is the most challen...
Expanding Cements for Primary Cementing
Expanding Cements for Primary Cementing
Abstract
The expansion of cement and the effect of various expansive aids upon oil well cementing compositions have been investigated to determine the amount of e...