Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Application of the New IADC Dull Grading System for Fixed Cutter Bits
View through CrossRef
ABSTRACT
This paper describes a recently developed standardized system for dull grading natural diamond, PDC, and TSP (Thermally Stable Polycrystalline diamond) bits, otherwise known as fixed cutter bits. The new system is consistent with the recently revised dull grading system for roller bits. It describes the condition of the cutting structure, the primary (with location) and secondary dull characteristics, the gauge condition, and the reason the bit was pulled. Examples of all commonly seen dull characteristics of fixed cutter bits are given. In addition, several worn fixed cutter bits are dull graded using the system.
Title: Application of the New IADC Dull Grading System for Fixed Cutter Bits
Description:
ABSTRACT
This paper describes a recently developed standardized system for dull grading natural diamond, PDC, and TSP (Thermally Stable Polycrystalline diamond) bits, otherwise known as fixed cutter bits.
The new system is consistent with the recently revised dull grading system for roller bits.
It describes the condition of the cutting structure, the primary (with location) and secondary dull characteristics, the gauge condition, and the reason the bit was pulled.
Examples of all commonly seen dull characteristics of fixed cutter bits are given.
In addition, several worn fixed cutter bits are dull graded using the system.
Related Results
New Generation of Soft Formation TCI Bits Reduces Drilling Costs in High-Cost Environments
New Generation of Soft Formation TCI Bits Reduces Drilling Costs in High-Cost Environments
Abstract
Steady improvements in bearing and seal technology coupled with more durable carbide shapes and the latest tungsten carbide and steel technology have aff...
Impregnated Bit Technology Improves Drilling Efficiency in North Sea Conglomerates
Impregnated Bit Technology Improves Drilling Efficiency in North Sea Conglomerates
SPE Members
Abstract
Historically, the Upper Jurassic Brae conglomerates intrinsic to North Sea Block 16/17 have been drilled wi...
Numerical Study on Rock-Breaking Mechanisms of Triangular-Shaped PDC Cutter
Numerical Study on Rock-Breaking Mechanisms of Triangular-Shaped PDC Cutter
ABSTRACT
Conventional PDC cutter usually gets broken when drilling into deep formations due to high hardness and strong abrasion. To help solve such a problem, tr...
A formation of xingnu iron bits and its surroundings areas
A formation of xingnu iron bits and its surroundings areas
There are two similarities in the iron bits before Xiongnu Period, as known as Schyto-Siberian Culture period, which was existed around the eastern Eurasian steppe area in terms of...
Influence of Cutter Head on Cavitation of Non-Jammed Submerged Grinder Pump
Influence of Cutter Head on Cavitation of Non-Jammed Submerged Grinder Pump
For the investigation of the cavitation of non-jammed submersible grinder pumps, a GSP-22 model pump was numerically simulated based on CFX. ICEM-CFD was applied to a structured me...
Experiments on the Novel Chord-Edge Cutter to Break Rock with Higher Efficiency and Its Field Application
Experiments on the Novel Chord-Edge Cutter to Break Rock with Higher Efficiency and Its Field Application
Summary
Aiming at the difficulty of penetration in hard-plasticity formation represented by the Mahu oil field, a new type of chord-edge cutter is proposed. Through ...
New Prediction Method for ROP Potential of Shaped PDC Cutters
New Prediction Method for ROP Potential of Shaped PDC Cutters
Summary
Mechanical specific energy (MSE) is normally used to evaluate the rock-cutting efficiency of shaped polycrystalline diamond compact (PDC) cutters. The lower ...
Cutting mechanism of a special 3D concave-shaped PDC cutter applicable to the Weiyuan shale
Cutting mechanism of a special 3D concave-shaped PDC cutter applicable to the Weiyuan shale
AbstractThe Weiyuan shale gas field faces problems of long drilling cycles and high development costs. Improving the drilling efficiency of polycrystalline diamond compact bits in ...