Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Ferroelectric and dielectric properties of Mo-doped SrBi4Ti4O15 ceramics

View through CrossRef
The ferroelectric ceramics samples of SrBi4-x/3Ti4-xMoxO15(x=0.00, 0.003, 0.012, 0.03, 0.06, 0.09) have been prepared by the conventional solid-state reaction method. X-ray diffraction analysis shows that the crystal structure of SrBi4Ti4O15 (SBTi) is not affected by Mo-doping. The scanning electronics microscope (SEM) images indicate that all the samples consist of sheet grains and the grain size is reduced by Mo-doping while the ferroelectric properties are improved significantly. The remanent polarization (2Pr) increases at first,then decreases with the increasing Mo content. At x=0.06, the 2Pr maximizes at a value of 26.5 μC/cm2, which about 117% higher in comparison with that of SBTi. And the coercive field of SBTi is increased only about 20%. The Curie temperature of the samples varied slightly after doping, which implies that the good thermal stability of SBTi is not sacrificed.
Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
Title: Ferroelectric and dielectric properties of Mo-doped SrBi4Ti4O15 ceramics
Description:
The ferroelectric ceramics samples of SrBi4-x/3Ti4-xMoxO15(x=0.
00, 0.
003, 0.
012, 0.
03, 0.
06, 0.
09) have been prepared by the conventional solid-state reaction method.
X-ray diffraction analysis shows that the crystal structure of SrBi4Ti4O15 (SBTi) is not affected by Mo-doping.
The scanning electronics microscope (SEM) images indicate that all the samples consist of sheet grains and the grain size is reduced by Mo-doping while the ferroelectric properties are improved significantly.
The remanent polarization (2Pr) increases at first,then decreases with the increasing Mo content.
At x=0.
06, the 2Pr maximizes at a value of 26.
5 μC/cm2, which about 117% higher in comparison with that of SBTi.
And the coercive field of SBTi is increased only about 20%.
The Curie temperature of the samples varied slightly after doping, which implies that the good thermal stability of SBTi is not sacrificed.

Related Results

The chemical bond properties and ferroelectricity studies of SrBi4Ti4O15
The chemical bond properties and ferroelectricity studies of SrBi4Ti4O15
Spontaneous polarization as the most immediate parameter in ferroelectricity is always an emphasis in ferroelectric research. Some ferroelectric microscopic theory such as Berry-ph...
Ferroelectric Ceramic Materials Prepared by Nanoparticles in Outdoor Environmental Sculpture Art
Ferroelectric Ceramic Materials Prepared by Nanoparticles in Outdoor Environmental Sculpture Art
With the development and progress of the city, people’s research on outdoor sculpture has gone deeper, and the field of material research has been raised to the field of spiritual ...
High tunable dielectric properties of Ce and Mg alternately doped Ba0.6Sr0.4TiO3 films
High tunable dielectric properties of Ce and Mg alternately doped Ba0.6Sr0.4TiO3 films
For barium strontium titanate (Ba0.6Ti0.4TiO3, BST) films used in tunable microwave devices, they must have excellent structural characteristics and outstanding combination of diel...
Relaxor Ferroelectric Oxides: Concept to Applications
Relaxor Ferroelectric Oxides: Concept to Applications
Ferroelectric ceramic is one of the most important functional materials, which has great importance in modern technologies. A ferroelectric ceramic simultaneously exhibits dielectr...
Atomistic Modeling of Ferroelectric Materials in Devices
Atomistic Modeling of Ferroelectric Materials in Devices
The polarization, switching dynamics and dielectric properties of ferroelectric materials are usually measured experimentally through a device structure in which ferroelectric comp...
Study of ferroelectric switching and fatigue behaviors in poly(vinylidene fluoride-trifluoroethylene) copolymer nano-films
Study of ferroelectric switching and fatigue behaviors in poly(vinylidene fluoride-trifluoroethylene) copolymer nano-films
The nano-films of poly (vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) copolymer, with mole ratio of VDFTrFE 70/30, are deposited on titanium-metallized silicon wafer by spin...
A Review on Dielectric Materials and Composites: Polarisation Effects, Synthesis Methods and Applications
A Review on Dielectric Materials and Composites: Polarisation Effects, Synthesis Methods and Applications
ABSTRACT Dielectric materials are key elements in modern electronic applications such as sensors, actuators and communication systems. This review consolidates th...
Perovskite Ferroelectric
Perovskite Ferroelectric
The spectrums of properties exhibited by ferroelectric materials are dielectric, ferroelectric, piezoelectric and pyroelectric effect. This is the makes these materials to have a w...

Back to Top