Javascript must be enabled to continue!
Copper-Ion Responsive Chemical Bimetal
View through CrossRef
Abstract
A new type of sensor, called “Chemical Bimetal”, has been developed. Chemical Bimetal uses the “Bimetal effect” and can effectively amplify the expansion or the contraction of materials. The copper-ion responsive Chemical Bimetal was constructed from polyethylene terephthalate (PET) membrane and polyvinyl chloride (PVC) membrane which contains 7-(1-ethenyl-3,3,5,5-tetramethylhexyl)-8-quinolinol (Kelex 100) as a reactant. This Chemical Bimetal responds to copper ion concentration from 0.2 to 1 mM.
Title: Copper-Ion Responsive Chemical Bimetal
Description:
Abstract
A new type of sensor, called “Chemical Bimetal”, has been developed.
Chemical Bimetal uses the “Bimetal effect” and can effectively amplify the expansion or the contraction of materials.
The copper-ion responsive Chemical Bimetal was constructed from polyethylene terephthalate (PET) membrane and polyvinyl chloride (PVC) membrane which contains 7-(1-ethenyl-3,3,5,5-tetramethylhexyl)-8-quinolinol (Kelex 100) as a reactant.
This Chemical Bimetal responds to copper ion concentration from 0.
2 to 1 mM.
Related Results
Chemical pre-intercalation synthesis approach for novel layered cathode materials for Li-ion and beyond Li-ion batteries
Chemical pre-intercalation synthesis approach for novel layered cathode materials for Li-ion and beyond Li-ion batteries
Beyond-lithium ion (BLI) alkali ion-based batteries are rising in interest among researchers because of their utilization of more abundant, cost-effective charge carriers, includin...
Contact Surfaces Preparation in Manufacturing of Bimetallic Strips CuZn10 Brass - C22E Steel - CuZn10 Brass
Contact Surfaces Preparation in Manufacturing of Bimetallic Strips CuZn10 Brass - C22E Steel - CuZn10 Brass
Contact surfaces preparation before cold cladding is one of the most important technological operations. A joint plastic components deformation of the of bimetal 1 according to OST...
7
th
International Symposium on Enabling Technologies for Life Sciences (ETP)
7
th
International Symposium on Enabling Technologies for Life Sciences (ETP)
The seventh in the series of ETP Symposia (see
Rapid Communications in Mass Spectrometry
2012,
26
, ...
PROPERTIES OF HIGH-CHROMIUM CAST IRON/LOW-CARBON STEEL BIMETAL FABRICATED BY HOT-ROLLING
PROPERTIES OF HIGH-CHROMIUM CAST IRON/LOW-CARBON STEEL BIMETAL FABRICATED BY HOT-ROLLING
A bimetal composite plate including a high-chromium cast iron (HCCI) and low-carbon steel (LCS) cladding was fabricated with hot-rolling bonding in the form of a sandwich structure...
Linear ion traps in mass spectrometry
Linear ion traps in mass spectrometry
Abstract
I.
Introduction
000
II.
Linear Multipoles
000
A. Multipole Fields
000
1. Multipole Potentials
000
2. Ion Motion in 2D Multipole Fields
000...
(A03 Best Poster Winner) Chemically Preintercalated Bilayered Vanadium Oxides As Novel Cathode Materials for High Capacity K-Ion Batteries
(A03 Best Poster Winner) Chemically Preintercalated Bilayered Vanadium Oxides As Novel Cathode Materials for High Capacity K-Ion Batteries
As technology behind portable electronics, grid-scale energy storage, and electric vehicles advances, there is an increased dependence on rechargeable battery systems. Today, this ...
Solid‐State Ion Exchange in Zeolites
Solid‐State Ion Exchange in Zeolites
AbstractThe sections in this article areIntroductionComparison of Conventional and Solid‐State Ion ExchangeExperimental Procedure for Solid‐State Ion Exchange in ZeolitesMethods of...
Towards Safer Batteries- 4D Imaging of Abuse Mechanisms in Lithium-Ion Batteries Using Synchrotron X-Ray Computed Tomography
Towards Safer Batteries- 4D Imaging of Abuse Mechanisms in Lithium-Ion Batteries Using Synchrotron X-Ray Computed Tomography
Higher energy density materials are being pushed by the research community to make lithium-ion batteries a better competitor to chemical fossil fuels for transport applications. Th...

