Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Development of a multi-functional biopolymer scaffold for neural tissue engineering

View through CrossRef
Spinal cord injury (SCI) affects approximately 270,000 people in the U.S., with approximately 12,000 new cases occurring every year. Several strategies have been investigated to enhance axonal regeneration after SCI, however, the resulting growth can be random and disorganized. Bioengineered scaffolds provide a physical substrate for the guidance of regenerating axons towards their targets, and can be produced by freeze casting. This technique involves the controlled directional solidification of an aqueous solution or suspension, resulting in a linearly aligned porous structure caused by ice templating. In this thesis, freeze casting was used to create novel porous chitosan-alginate (C/A) scaffolds with longitudinally aligned channels and a compressive modulus (5.08 ± 0.61 kPa) comparable to that of native spinal cord tissue. These C/A scaffolds supported the viability, attachment, and directionally oriented growth of chick dorsal root ganglia (DRG) neurites in vitro, with surface adsorptions of polycations and laminin promoting significantly longer neurite growth than the uncoated scaffolds (p<0.001). In order to integrate therapeutic biomolecules within the scaffolds for sustained release, alginate and chitosan microcapsules produced by spray drying were used to encapsulate brain-derived neurotrophic factor (BDNF) and neurotrophin-3 (NT-3), and the enzyme chondroitinase ABC (chABC) prior to scaffold incorporation. BDNF and NT-3 were released from the C/A scaffolds in a sustained manner for 8 weeks in vitro, while chABC was released for up to 35 days. However, up to 85% of biomolecules remained entrapped within the scaffold walls, due to limitation of diffusion by the scaffold wall mesh size. Release of bioactive chABC and neurotrophins from the multi-functional scaffolds promoted the growth of DRG neurites through an in vitro barrier of chondroitin sulfate proteoglycans, a main inhibitory component of the growth-inhibiting glial scar in the injured spinal cord. The present data suggest these multi-functional scaffolds are suitable for use and future testing in vivo as a combination strategy for spinal cord repair due to their ability to promote the directionally oriented growth of neurites and their ability to provide the sustained release of therapeutic bioactive molecules for the stimulation of axonal growth through the glial scar.
Title: Development of a multi-functional biopolymer scaffold for neural tissue engineering
Description:
Spinal cord injury (SCI) affects approximately 270,000 people in the U.
S.
, with approximately 12,000 new cases occurring every year.
Several strategies have been investigated to enhance axonal regeneration after SCI, however, the resulting growth can be random and disorganized.
Bioengineered scaffolds provide a physical substrate for the guidance of regenerating axons towards their targets, and can be produced by freeze casting.
This technique involves the controlled directional solidification of an aqueous solution or suspension, resulting in a linearly aligned porous structure caused by ice templating.
In this thesis, freeze casting was used to create novel porous chitosan-alginate (C/A) scaffolds with longitudinally aligned channels and a compressive modulus (5.
08 ± 0.
61 kPa) comparable to that of native spinal cord tissue.
These C/A scaffolds supported the viability, attachment, and directionally oriented growth of chick dorsal root ganglia (DRG) neurites in vitro, with surface adsorptions of polycations and laminin promoting significantly longer neurite growth than the uncoated scaffolds (p<0.
001).
In order to integrate therapeutic biomolecules within the scaffolds for sustained release, alginate and chitosan microcapsules produced by spray drying were used to encapsulate brain-derived neurotrophic factor (BDNF) and neurotrophin-3 (NT-3), and the enzyme chondroitinase ABC (chABC) prior to scaffold incorporation.
BDNF and NT-3 were released from the C/A scaffolds in a sustained manner for 8 weeks in vitro, while chABC was released for up to 35 days.
However, up to 85% of biomolecules remained entrapped within the scaffold walls, due to limitation of diffusion by the scaffold wall mesh size.
Release of bioactive chABC and neurotrophins from the multi-functional scaffolds promoted the growth of DRG neurites through an in vitro barrier of chondroitin sulfate proteoglycans, a main inhibitory component of the growth-inhibiting glial scar in the injured spinal cord.
The present data suggest these multi-functional scaffolds are suitable for use and future testing in vivo as a combination strategy for spinal cord repair due to their ability to promote the directionally oriented growth of neurites and their ability to provide the sustained release of therapeutic bioactive molecules for the stimulation of axonal growth through the glial scar.

Related Results

Synthesis and Investigation into Apatite-forming Ability of Hydroxyapatite/Chitosan-based Scaffold
Synthesis and Investigation into Apatite-forming Ability of Hydroxyapatite/Chitosan-based Scaffold
In this study, porous scaffolds were fabricated using inorganic material-hydroxyapatite and chitosan for bone-tissue engineering. The combination of hydroxyapatite and chitosan may...
SUMMARY
SUMMARY
SUMMARYThe purpose of the present monograph is to give an account of the distribution of fibrinolytic components in the organism, with special reference to the tissue activator of ...
Evaluation of the Effective Diffusivity of a Freeform Fabricated Scaffold Using Computational Simulation
Evaluation of the Effective Diffusivity of a Freeform Fabricated Scaffold Using Computational Simulation
In scaffold-based tissue engineering, sufficient oxygen and nutrient supply into cells within a scaffold is essential to increase cell viability and the proliferation rate. General...
3D-printed nanohydroxyapatite/methylacrylylated silk fibroin scaffold for repairing rat skull defects
3D-printed nanohydroxyapatite/methylacrylylated silk fibroin scaffold for repairing rat skull defects
AbstractThe repair of bone defects remains a major challenge in the clinic, and treatment requires bone grafts or bone replacement materials. Existing biomaterials have many limita...
In Vitro Cytotoxicity Test Reveals Non-toxic of Waste-based Scaffold on Human Hepatocyte Cells
In Vitro Cytotoxicity Test Reveals Non-toxic of Waste-based Scaffold on Human Hepatocyte Cells
Scaffold, as one of the components for bone tissue engineering, requires formulated biomaterials that are both structurally and compositively similar to bone composition. Among oth...
Scaffold Hopping with Generative Reinforcement Learning
Scaffold Hopping with Generative Reinforcement Learning
Scaffold hopping – the design of novel scaffolds for existing lead candidates – is a multi-faceted and non-trivial task, for medicinal chemists and computational approaches alike. ...
Scaffold Hopping with Generative Reinforcement Learning
Scaffold Hopping with Generative Reinforcement Learning
Scaffold hopping – the design of novel scaffolds for existing lead candidates – is a multi-faceted and non-trivial task, for medicinal chemists and computational approaches alike. ...
Objecives of Tissue Engineering
Objecives of Tissue Engineering
Tissue exchange is an ancient art, but tissue engineering is a new concept. The new thinking about tissue engineering is supported by technologies that were developed during the tw...

Back to Top