Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Ageing, Solder Thickness and Solder Alloy Effects on Circuit Board Solderability
View through CrossRef
The paper presents the results of extensive studies on circuit board solderability comparing wetting balance and IPC test methods through performance in vapour phase and wave soldering operations. The effects on solderability of key parameters are examined and compared with storage times of one year, and accelerated ageing using damp heat, dry heat and steam oxygen. An evaluation is made of tin‐lead alloys from 40/60 to 70/30 in solder coating thicknesses from 0·1 to 1·0 mil.
Title: Ageing, Solder Thickness and Solder Alloy Effects on Circuit Board Solderability
Description:
The paper presents the results of extensive studies on circuit board solderability comparing wetting balance and IPC test methods through performance in vapour phase and wave soldering operations.
The effects on solderability of key parameters are examined and compared with storage times of one year, and accelerated ageing using damp heat, dry heat and steam oxygen.
An evaluation is made of tin‐lead alloys from 40/60 to 70/30 in solder coating thicknesses from 0·1 to 1·0 mil.
Related Results
Effect of alloy particle size and stencil aperture shape on solder printing quality
Effect of alloy particle size and stencil aperture shape on solder printing quality
Purpose
Reflow solder joint quality is significantly affected by the ability of the solder to perfectly fill pad space and retain good solder joint shape. This study aims to invest...
Fill the Void
Fill the Void
ABSTRACT
Voids in solder joints are a concern for many electronic manufacturers. They create weakness in the solder joints which can lead to mechanical failure. V...
SJQ and SJR Study of SMT Soldering with Low Temperature Solder Paste
SJQ and SJR Study of SMT Soldering with Low Temperature Solder Paste
ABSTRACT
This paper is in English and Chinese languages.
The transition to Lead Free SnAgCu solders, has necessitated higher temperatures in ref...
Fill The Void III
Fill The Void III
ABSTRACT
This study is part three in a series of papers on voiding in solder joints and methods for mitigation of voids. In this study several new variables were ...
Effect of stencil wall aperture on solder paste release via stencil printing
Effect of stencil wall aperture on solder paste release via stencil printing
Abstract
Solder paste printing is a process by which the correct amount of solder paste is applied to the printed circuit board via a stencil. The solder release fro...
What Do You Want on Your Tombstone?
What Do You Want on Your Tombstone?
ABSTRACT
Tombstoning, draw-bridging, bill-boarding, and skewing are all common defects that are caused by movement of components out of their intended position. T...
Lead Tinning Requirements for the 21St Century
Lead Tinning Requirements for the 21St Century
ABSTRACT
The solderability of components in the process of manufacturing printed circuit assemblies is key to the longevity and reliability of the finished produc...
Criteria for Solder Alloy Adoption
Criteria for Solder Alloy Adoption
ABSTRACT
Solder is a critical component in modern electronic systems – past, present, and future. While solder is used within packaged electrical devices, the hig...