The Viscoelastic Behavior of Soft Tissues Must be Accounted for in Stapler Design and Surgeon Technique

Background: Since its adoption as a surgical technique over a half-century ago, stapling has continually undergone improvements, both in the devices used and in our understanding of tissue mechanics. To best design and use stapling devices, it is beneficial to have an intimate knowledge of the response of tissue to compression and stapling dynamics. This paper provides the relevant background in the field of biomechanics, and in particular addresses the viscoelastic behavior of soft tissues under compression. Biomechanics of Stapling: The change in shape of a solid, or strain, is related to the load applied, or stress. Biological tissues are known to have non-linear relationships between stress and strain, and generally the relationships are anisotropic (dependent upon direction). Further complicating matters, there is typically a time-dependency to the relationship for compression and recovery, resulting in viscoelastic behavior. Hence both the amount and rate of compressive force applied can be expected to impact the outcome of stapling. Discussion: The growth of the laparoscopic use of staples has increased the difficulty of device design, as precise control of compression is problematic in extended length staplers. Progressive firing along the cartridge and multi-stage compression have both been found to be beneficial in providing the uniform force needed to produce well-formed staples. Such technical advances can reduce stresses within the stapler, preventing deformation of the stapler arm and undesirable strain in the tissue. Current research includes understanding the effects of changing the rate of compression on staple formation with the hope that further improvements can be achieved in this ever-fruitful method of tissue apposition.