Javascript must be enabled to continue!
New Mechanism for Long Photo‐Induced Enhanced Raman Spectroscopy in Au Nanoparticles Embedded in TiO2
View through CrossRef
AbstractThe photo‐induced enhanced Raman spectroscopy (PIERS) effect is a phenomenon taking place when plasmonic nanoparticles deposited on a semiconductor are illuminated by UV light prior to Raman measurement. Results from the literature show that the PIERS effect lasts for about an hour. The proposed mechanism for this effect is the creation of oxygen vacancies in the semiconductor that would create a path for charge transfer between the analyte and the nanoparticles. However, this hypothesis has never been confirmed experimentally. Furthermore, the tested structure of the PIERS substrate has always been composed of plasmonic nanoparticles deposited on top of the semiconductor. Here, gold nanoparticles co‐deposited with porous TiO2 are used as a PIERS substrate. The deposition process confers the nanoparticles a unique position half buried in the nanoporous semiconductor. The resulting PIERS intensity is among the highest measured until now but most importantly the duration of the effect is significantly longer (at least 8 days). Cathodoluminescence measurements on these samples show that two distinct mechanisms are at stake for co‐deposited and drop‐casted gold nanoparticles. The oxygen vacancies hypothesis tends to be confirmed for the latter, but the narrowing of the depletion zone explains the long PIERS effect.
Title: New Mechanism for Long Photo‐Induced Enhanced Raman Spectroscopy in Au Nanoparticles Embedded in TiO2
Description:
AbstractThe photo‐induced enhanced Raman spectroscopy (PIERS) effect is a phenomenon taking place when plasmonic nanoparticles deposited on a semiconductor are illuminated by UV light prior to Raman measurement.
Results from the literature show that the PIERS effect lasts for about an hour.
The proposed mechanism for this effect is the creation of oxygen vacancies in the semiconductor that would create a path for charge transfer between the analyte and the nanoparticles.
However, this hypothesis has never been confirmed experimentally.
Furthermore, the tested structure of the PIERS substrate has always been composed of plasmonic nanoparticles deposited on top of the semiconductor.
Here, gold nanoparticles co‐deposited with porous TiO2 are used as a PIERS substrate.
The deposition process confers the nanoparticles a unique position half buried in the nanoporous semiconductor.
The resulting PIERS intensity is among the highest measured until now but most importantly the duration of the effect is significantly longer (at least 8 days).
Cathodoluminescence measurements on these samples show that two distinct mechanisms are at stake for co‐deposited and drop‐casted gold nanoparticles.
The oxygen vacancies hypothesis tends to be confirmed for the latter, but the narrowing of the depletion zone explains the long PIERS effect.
Related Results
COST-EFFECTIVE WELL-SUITED GREEN AZADIRACHTA INDICA REDUCED AG-TIO2: A POTENT SPHERICAL NANO SCAFFOLDS
COST-EFFECTIVE WELL-SUITED GREEN AZADIRACHTA INDICA REDUCED AG-TIO2: A POTENT SPHERICAL NANO SCAFFOLDS
The profitability of nanoparticles has been steadily increasing owing to their diverse use in catalysis, electronics, energy, & medicine. However, the conventional methods of p...
The Hydrothermal Synthesis of TiO2-GO with Enhance Photocatalytic Activity
The Hydrothermal Synthesis of TiO2-GO with Enhance Photocatalytic Activity
A composite material consisting of titanium dioxide and graphene oxide (TiO2–GO) was synthesized through a hydrothermal reaction. This reaction involved the use of Ti(SO4)2 in an e...
Antimicrobial activity of ciprofloxacin-coated gold nanoparticles on selected pathogens
Antimicrobial activity of ciprofloxacin-coated gold nanoparticles on selected pathogens
Antibiotic resistance amongst bacterial pathogens is a crisis that has been worsening over recent decades, resulting in serious and often fatal infections that cannot be treated by...
Enhanced Photocatalytic Activity of Metal‐Metal‐Nonmetal Multidoped TiO2 Nanoparticles towards Visible Light
Enhanced Photocatalytic Activity of Metal‐Metal‐Nonmetal Multidoped TiO2 Nanoparticles towards Visible Light
AbstractTiO2 is the most important and remarkable material in photocatalytic applications. In the present work, pure and doped TiO2 nanoparticles were fabricated by the sol‐gel syn...
Photocatalytic Degradation of Gaseous Benzene Using Cu/Fe-Doped TiO2 Nanocatalysts under Visible Light
Photocatalytic Degradation of Gaseous Benzene Using Cu/Fe-Doped TiO2 Nanocatalysts under Visible Light
Visible-light-enhanced TiO2 nanocatalysts doped with Cu and Fe were synthesized using the sol–gel method to investigate their performance in degrading gaseous benzene. The structur...
Performance comparison of dye-sensitized solar cells by using different metal oxide- coated TiO2 as the photoanode
Performance comparison of dye-sensitized solar cells by using different metal oxide- coated TiO2 as the photoanode
In order to increase the conversion efficiency of dye-sensitized solar cells, TiO2 photoanode surface is often covered with a metal oxide layer to form a core-shell composite struc...
Adsorption and Photocatalytic Mineralization of Bromophenol Blue Dye with TiO2 Modified with Clinoptilolite/Activated Carbon
Adsorption and Photocatalytic Mineralization of Bromophenol Blue Dye with TiO2 Modified with Clinoptilolite/Activated Carbon
This study presents a hybridized photocatalyst with adsorbate as a promising nanocomposite for photoremediation of wastewater. Photocatalytic degradation of bromophenol blue (BPB) ...
Reusable PCL scaffolds with multifunctional titanium dioxide nanoparticles
Reusable PCL scaffolds with multifunctional titanium dioxide nanoparticles
Abstract
Titanium dioxide nanoparticles (TiO2 NPs) have become highly regarded for their extensive applications across environmental remediation, medical therapies, ...

