Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Comparison of the Thermohydraulic Efficiency of a Rectangular Fin Tube Heat Exchanger with or without Modified Rectangular Winglet Vortex Generator
View through CrossRef
Performance Evaluation Criteria (PEC)/ Thermo hydraulic efficiency of a Heat Exchanger may be increased using a Modified Rectangular Winglet Vortex Generator (MRWVG). This Modified rectangular Winglet Vortex Generator is fixed on a rectangular type fin plate and this plate is used to find the Performance Evaluation Criteria with the help of a wind tunnel. The wind tunnel test rig is used for calculating the experimental data with and without a rectangular winglet vortex generator. In this test section first, take a reading on the rectangular plate without the modified rectangular winglet Vortex Generator, and then after fixing the modified rectangular winglet and all experimental repeats same with the modified rectangular winglet Vortex Generator to find PEC. The maximum PEC is calculated experimentally for both with or without using the modified rectangular winglet and after that, a comparison should be done and find the maximum Performance Evaluation Criteria.
TechnoFit Academic Publishers LLC
Title: Comparison of the Thermohydraulic Efficiency of a Rectangular Fin Tube Heat Exchanger with or without Modified Rectangular Winglet Vortex Generator
Description:
Performance Evaluation Criteria (PEC)/ Thermo hydraulic efficiency of a Heat Exchanger may be increased using a Modified Rectangular Winglet Vortex Generator (MRWVG).
This Modified rectangular Winglet Vortex Generator is fixed on a rectangular type fin plate and this plate is used to find the Performance Evaluation Criteria with the help of a wind tunnel.
The wind tunnel test rig is used for calculating the experimental data with and without a rectangular winglet vortex generator.
In this test section first, take a reading on the rectangular plate without the modified rectangular winglet Vortex Generator, and then after fixing the modified rectangular winglet and all experimental repeats same with the modified rectangular winglet Vortex Generator to find PEC.
The maximum PEC is calculated experimentally for both with or without using the modified rectangular winglet and after that, a comparison should be done and find the maximum Performance Evaluation Criteria.
Related Results
Improvement of Plate-Fin Heat Exchanger Performance with Assistance of Various Types of Vortex Generator
Improvement of Plate-Fin Heat Exchanger Performance with Assistance of Various Types of Vortex Generator
A 3-dimensional incompressible laminar flow and heat-transfer in a plate-fin heat exchanger (PFHE) where investigated numerically in this article. The influence of mounting a longi...
Investigation of vortex in pump sump by V3V measurements
Investigation of vortex in pump sump by V3V measurements
Abstract
The aims, scope and conclusions of the paper must be in a self-contained abstract of a single paragraph with 60-120 words. The abstract must be informative ...
ANALYSIS OF DENICKELIFICATION PHENOMENON ON HEAT EXCHANGER TUBE
ANALYSIS OF DENICKELIFICATION PHENOMENON ON HEAT EXCHANGER TUBE
DeNickelification is common phenomenon which occurs for alloy metal containing sufficient amounts of Nickel when it is exposed at high temperature in long time periode. One of comp...
Numerical Investigation of Power Generation Enhancement for Exhaust Heat Exchanger with Cylindrical Grooves in Thermoelectric Generator Systems
Numerical Investigation of Power Generation Enhancement for Exhaust Heat Exchanger with Cylindrical Grooves in Thermoelectric Generator Systems
<div class="section abstract"><div class="htmlview paragraph">For vehicle thermoelectric generator, heat would be directly transferred into electricity by thermoelectri...
Numerical simulation for axis switching of pulsating jet issued from rectangular nozzle at low Reynolds number
Numerical simulation for axis switching of pulsating jet issued from rectangular nozzle at low Reynolds number
Axis switching of a jet ejected from a rectangular nozzle affects flow mixing characteristics. To elucidate such a mixing mechanism, the axis switching and vortex structure deforma...
Understanding multi-fin swimming and maneuvering to develop highly capable swimming robots
Understanding multi-fin swimming and maneuvering to develop highly capable swimming robots
Fish swim underwater with levels of agility and maneuverability that far exceed those of contemporary unmanned underwater vehicles (UUVs). While UUVs primarily rely on rectilinear ...
Design and Optimization of a Helix Finned Tube Heat Exchanger for 2 K Superfluid Helium Vertical Test Stand
Design and Optimization of a Helix Finned Tube Heat Exchanger for 2 K Superfluid Helium Vertical Test Stand
Abstract
A 2 K heat exchanger is essential for 2 K superfluid helium cryogenic systems, as it increases cooling capacity and improves overall system efficiency. The ...
Natural Convection From Finned Heat Sinks
Natural Convection From Finned Heat Sinks
A CFD (computational fluid dynamics) analysis is performed on the finned heat sinks. For convenience, a commercial CFD code, Flotherm, is utilized in the analysis. Though the code ...