Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

On Secondary β-Nb Phase Precipitation within Primary α-Zr Phase in Zr-Nb Alloys During Tensile Deformation

View through CrossRef
Abstract Two-phase alloys of zirconium, Zr-1wt% Nb and Zr-2.5wt% Nb, are widely used in nuclear reactors as fuel-clad and structural material, respectively. Post-irradiation studies on Zr-Nb alloys have shown Nb rich β (containing more than 50wt% Nb) precipitation within the α-Zr phase. In the present study, slow deformation of the two alloys at elevated temperature was carried out on unirradiated material at different temperature up to 873 K. Secondary phase (β-Nb), identified by TEM, micro diffraction and Energy Dispersive Spectroscopy, was observed to precipitate within the primary phase (α-Zr), which is similar to the observations in the irradiated material. The precipitation was dependent on temperature and imposed strain. Measurements of the lattice parameter of the α-Zr phase using X-ray diffraction show a sharp increase in samples deformed above 550 K, where the precipitation was also observed. This change is due to Nb drawn out of the supersaturated α-Zr phase during precipitation. There is a progressive increase in the dislocation density, measured by X-ray diffraction, due to strain on elevated temperature tensile deformation (up to 723 K). No such change in lattice parameter was observed in the case of samples aged at test temperatures without deformation. Dislocations generated during deformation provide enhanced Nb diffusivity, increased preferential nucleation sites, and reduced the strain energy required for nucleation of the β-Nb phase within the existing α-Zr phase. The similarity in the secondary phase precipitation observed between slow deformation at elevated temperature and irradiation is explained on the basis of dislocation-enhanced precipitation. The change in the texture due to the uniaxial tensile deformation at elevated temperature gives information on the acting deformation mechanisms. By measurement of texture at each test temperature, the deformation mechanisms were determined, which is related to the observed precipitation behavior.
Title: On Secondary β-Nb Phase Precipitation within Primary α-Zr Phase in Zr-Nb Alloys During Tensile Deformation
Description:
Abstract Two-phase alloys of zirconium, Zr-1wt% Nb and Zr-2.
5wt% Nb, are widely used in nuclear reactors as fuel-clad and structural material, respectively.
Post-irradiation studies on Zr-Nb alloys have shown Nb rich β (containing more than 50wt% Nb) precipitation within the α-Zr phase.
In the present study, slow deformation of the two alloys at elevated temperature was carried out on unirradiated material at different temperature up to 873 K.
Secondary phase (β-Nb), identified by TEM, micro diffraction and Energy Dispersive Spectroscopy, was observed to precipitate within the primary phase (α-Zr), which is similar to the observations in the irradiated material.
The precipitation was dependent on temperature and imposed strain.
Measurements of the lattice parameter of the α-Zr phase using X-ray diffraction show a sharp increase in samples deformed above 550 K, where the precipitation was also observed.
This change is due to Nb drawn out of the supersaturated α-Zr phase during precipitation.
There is a progressive increase in the dislocation density, measured by X-ray diffraction, due to strain on elevated temperature tensile deformation (up to 723 K).
No such change in lattice parameter was observed in the case of samples aged at test temperatures without deformation.
Dislocations generated during deformation provide enhanced Nb diffusivity, increased preferential nucleation sites, and reduced the strain energy required for nucleation of the β-Nb phase within the existing α-Zr phase.
The similarity in the secondary phase precipitation observed between slow deformation at elevated temperature and irradiation is explained on the basis of dislocation-enhanced precipitation.
The change in the texture due to the uniaxial tensile deformation at elevated temperature gives information on the acting deformation mechanisms.
By measurement of texture at each test temperature, the deformation mechanisms were determined, which is related to the observed precipitation behavior.

Related Results

Spatio-temporal Distribution Characteristics of Summer Precipitation Duration in Northwest China
Spatio-temporal Distribution Characteristics of Summer Precipitation Duration in Northwest China
Based on the daily precipitation observation data of 208 rain-gauge stations in Northwest China from 1961 to 2020, we use the statistical analysis method, the Mann-Kendall test met...
On Secondary β-Nb Phase Precipitation within Primary α-Zr Phase in Zr-Nb Alloys During Tensile Deformation
On Secondary β-Nb Phase Precipitation within Primary α-Zr Phase in Zr-Nb Alloys During Tensile Deformation
Two-phase alloys of zirconium, Zr-1wt% Nb and Zr-2.5wt% Nb, are widely used in nuclear reactors as fuel-clad and structural material, respectively. Post-irradiation studies on Zr-N...
Copper Alloys
Copper Alloys
Abstract The article contains sections titled: ...
Diffusion and its Application in NiMnGa Alloys
Diffusion and its Application in NiMnGa Alloys
Heusler NiMnGa alloys are often categorized as ferromagnetic shape memory alloys or magnetocaloric materials, which are important for both practical applications and fundamental re...
Trend in Extreme Precipitation Indices Based on Long Term In Situ Precipitation Records over Pakistan
Trend in Extreme Precipitation Indices Based on Long Term In Situ Precipitation Records over Pakistan
Assessing the long-term precipitation changes is of utmost importance for understanding the impact of climate change. This study investigated the variability of extreme precipitati...
Deformation Time-series Analysis and Disaster Potentiality Inversion by Short Baseline Interferometry Measurement
Deformation Time-series Analysis and Disaster Potentiality Inversion by Short Baseline Interferometry Measurement
Synthetic aperture radar interferometry (InSAR) measurement technology is a new remote sensing technology that can effectively monitor slight land deformation. Compared with tradit...
Conditional Ensemble Model Output Statistics for Postprocessing of Ensemble Precipitation Forecasting
Conditional Ensemble Model Output Statistics for Postprocessing of Ensemble Precipitation Forecasting
Abstract Forecasts produced by EPSs provide the potential state of the future atmosphere and quantify uncertainty. However, the raw ensemble forecasts from a single EPS are typical...

Back to Top