Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
A V-Shape Optical Pin Interface for Board Level Optical Interconnect
View through CrossRef
This paper introduces a new interface of an optical pin for Printed Circuit Boards (PCBs), the V-shape cut type which is an innovation from the 90-degree cut type optical pin. The effectiveness is determined by optical characteristics through OptiCAD and by experiment. The simulation used a model of ray tracing analysis which is a one to two (split) connection function model. For the experiment, a Polymer Optical Fibre (POF) V-shape optical pin has been fabricated. It was found that the V-shaped optical pin has a multi-branched function and is applicable to optical interconnection. Full Text: PDF ReferencesMikami, O., et al. Optical pin interface for 90-deg optical path conversion coupling to Printed Wiring Board. in Region 10 Conference (TENCON), 2016 IEEE. 2016. IEEE. CrossRef DeCusatis, C., Data center architectures, in Optical Interconnects for Data Centers. 2017, Elsevier. p. 3-41. CrossRef Duranton, M., D. Dutoit, and S. Menezo, Key requirements for optical interconnects within data centers, in Optical Interconnects for Data Centers. 2017, Elsevier. p. 75-94. CrossRef ITOH, Y., et al., Optical Coupling Characteristics of Optical Pin with 45° Micro Mirror for Optical Surface Mount Technology. Journal of The Japan Institute of Electronics Packaging, 2001. 4(6): p. 497-503. CrossRef Uchida, T. and O. Mikami, Optical surface mount technology. IEICE Transactions on Electronics, 1997. 80(1): p. 81-87. CrossRef Papakonstantinou, I., et al., Low-cost, precision, self-alignment technique for coupling laser and photodiode arrays to polymer waveguide arrays on multilayer PCBs. IEEE Transactions on Advanced Packaging, 2008. 31(3): p. 502-511. CrossRef Nakama, K., et al., Optical connection device. 2006, Google Patents. DirectLink Ramaswami, R., K. Sivarajan, and G. Sasaki, Optical networks: a practical perspective. 2009: Morgan Kaufmann. DirectLink Tong, X.C., Advanced materials for integrated optical waveguides. 2014: Springer. CrossRef
Photonics Society of Poland
Title: A V-Shape Optical Pin Interface for Board Level Optical Interconnect
Description:
This paper introduces a new interface of an optical pin for Printed Circuit Boards (PCBs), the V-shape cut type which is an innovation from the 90-degree cut type optical pin.
The effectiveness is determined by optical characteristics through OptiCAD and by experiment.
The simulation used a model of ray tracing analysis which is a one to two (split) connection function model.
For the experiment, a Polymer Optical Fibre (POF) V-shape optical pin has been fabricated.
It was found that the V-shaped optical pin has a multi-branched function and is applicable to optical interconnection.
Full Text: PDF ReferencesMikami, O.
, et al.
Optical pin interface for 90-deg optical path conversion coupling to Printed Wiring Board.
in Region 10 Conference (TENCON), 2016 IEEE.
2016.
IEEE.
CrossRef DeCusatis, C.
, Data center architectures, in Optical Interconnects for Data Centers.
2017, Elsevier.
p.
3-41.
CrossRef Duranton, M.
, D.
Dutoit, and S.
Menezo, Key requirements for optical interconnects within data centers, in Optical Interconnects for Data Centers.
2017, Elsevier.
p.
75-94.
CrossRef ITOH, Y.
, et al.
, Optical Coupling Characteristics of Optical Pin with 45° Micro Mirror for Optical Surface Mount Technology.
Journal of The Japan Institute of Electronics Packaging, 2001.
4(6): p.
497-503.
CrossRef Uchida, T.
and O.
Mikami, Optical surface mount technology.
IEICE Transactions on Electronics, 1997.
80(1): p.
81-87.
CrossRef Papakonstantinou, I.
, et al.
, Low-cost, precision, self-alignment technique for coupling laser and photodiode arrays to polymer waveguide arrays on multilayer PCBs.
IEEE Transactions on Advanced Packaging, 2008.
31(3): p.
502-511.
CrossRef Nakama, K.
, et al.
, Optical connection device.
2006, Google Patents.
DirectLink Ramaswami, R.
, K.
Sivarajan, and G.
Sasaki, Optical networks: a practical perspective.
2009: Morgan Kaufmann.
DirectLink Tong, X.
C.
, Advanced materials for integrated optical waveguides.
2014: Springer.
CrossRef.
Related Results
Interconnect Design Challenges in Nano CMOS Circuit
Interconnect Design Challenges in Nano CMOS Circuit
In the conventional scaling scheme, interconnect delay cannot be reduced and the global interconnect delay become worse if the length of the wire is not scaled. The conventional ap...
A Single Channel Thermal-Hydraulic Calculation Module for PWR Pin-by-Pin Wise Coupled Calculation System
A Single Channel Thermal-Hydraulic Calculation Module for PWR Pin-by-Pin Wise Coupled Calculation System
Abstract
Due to the strong feedback effect between neutronics and thermal-hydraulics in the core of pressurized water reactors (PWR), neutronics and thermal-hydrauli...
Analysis of non‐ideal effects in coupled VLSI interconnects with active and passive load variations
Analysis of non‐ideal effects in coupled VLSI interconnects with active and passive load variations
PurposeThe aim of this paper is to analyze the effects of aggressor‐line load variations (both active gate and passive capacitive loads) on the non‐ideal effects of a coupled VLSI‐...
Cam Design and Pin Defect Detection of Cam Pin Insertion Machine in IGBT Packaging
Cam Design and Pin Defect Detection of Cam Pin Insertion Machine in IGBT Packaging
Packaging equipment plays a crucial role in the semiconductor industry by enhancing product quality and reducing labor costs through automation. Research was conducted on IGBT modu...
Interface Resistance Analysis in Solid Oxide Fuel Cells
Interface Resistance Analysis in Solid Oxide Fuel Cells
A sophisticated design of the interface structure between the cathode and the electrolyte is essential to improve the performance of solid oxide fuel cells (SOFCs). It is because t...
Pin-on-Plate vs. Pin-on-Disk Wear Tests: Theoretical and Numerical Observations on the Initial Transient Phase
Pin-on-Plate vs. Pin-on-Disk Wear Tests: Theoretical and Numerical Observations on the Initial Transient Phase
Pin-on-plate and pin-on-disk wear tests are typically used for assessing the wear behavior of a given material coupling and estimating its wear coefficient using the Archard wear l...
Effect of Pin Speed on Cerchar Abrasion Test Results
Effect of Pin Speed on Cerchar Abrasion Test Results
Abstract
Abrasive properties of rocks affect tool selection and design of rock excavation machines as well as their productivity and operational costs. The Cerchar t...
INCIDENCE AND CLINICAL SIGNIFICANCE OF HIGH GRADE PROSTATIC INTRAEPITHELIAL NEOPLASIA IN TURP SPECIFIMENS
INCIDENCE AND CLINICAL SIGNIFICANCE OF HIGH GRADE PROSTATIC INTRAEPITHELIAL NEOPLASIA IN TURP SPECIFIMENS
BACKGROUND : PIN is a well known precancerous condition of prostatic carcinoma. Transurethral resection of prostate has become the most prominent and the easiest way, to morpholog...