Javascript must be enabled to continue!
Capillarity processes through the solar system
View through CrossRef
In everyday life, the manifestations of capillarity are countless, going from liquids ascension in fibers to the dynamics of bubbles and droplets. On a scientific point of view, hydrodynamics of capillarity is a rather old field, but it is still the subject of very active researches (de Gennes et al. 2004; Drelich et al. 2020) with a wide variety of applications like micro-lenses or blood circulation. The two last decades of space exploration have revealed the existence of several extraterrestrial liquid phases: liquid methane-ethane-nitrogen mixtures in Titan’s polar regions (Stofan et al. 2007), liquid water for Enceladus (Porco et al. 2006) and probably Europa (Sparks et al. 2017), while many evidence speak in favor of the massive presence of liquid water at the surface of Mars, billions years ago (Nazari-Sharabian et al. 2020). If we consider the Bond number, we can easily show that for the same considered liquid, at the surface of celestial bodies where the gravity is smaller than the terrestrial one, the effects of capillarity may be significantly reinforced.For instance, the small kronian satellite, Enceladus, has a crust dotted by cracks (Postberg et al. 2018), where the presence of liquid water is expected, the influence of capillarity should be strong there, compared to what we have at the surface of the Earth, since the gravity of Enceladus is aroung 0.11 m s-2 , almost two orders of magnitude lower than the terrestrial value. In this work, we address the problem of small solid particles flotation at the surface of a liquid. We also investigate some properties of extraterrestrial rain droplets and their possible ground imprints. We discuss the interaction of floating films with bubbles bursting, and we close our purpose by considering raindrops absorption into a porous soil. All physical processes are questioned in the perspective of their potential geophysical implications, a particular focus is on what could be observed by Dragonfly, the future Titan’s in situ mission.Fig. 1: Sketch of a spherical solid particle, of radius R and density ρ_sol , floating at the surface of a liquid with the density ρ_liq. The meniscus (blue line) is represented by the equation z = f (x), the surface tension of the interface is σ, while the contact angle between the solid and the liquid is denoted θc; θf is the filling angle. The difference of height between the plan of flotation and the surface of the unperturbated liquid is h_0 . The local tangent to the meniscus has the angle ψ with the horizontal. The gravity is represented by g.An Example of process: the floatability by capillarityThe presence of some floating material, over an interface between a liquid phase and a gaseous phase, can yield to major consequences by affecting exchanges of energy, momentum and matter between the phases. The form of this floating material may vary from a tiny monomolecular microlayer to a thick layer similar to sea ice. At the surface of terrestrial oceans, the presence of a thin floating film, produced by biological activity (Lin et al. 2003), has a damping effect on wave activity; marine films is an important topic, and constitutes a full-fledged academic discipline (Gade et al. 2006). Broadly speaking, a solid material is able to float at a liquid surface with the help a two physical processes: (1) the well known Archimede’s buyoancy force, for materials less dense than the liquid, (2) capillary forces. This is the second effect we study in this paragraph. The floatability generated by capillarity has been studied for a long time since it is very relevant for flotation industrial processes (Chipfunhu et al. 2011; Mousumi & Venugopal 2016; Kyzas & Matis 2018). For the sake of simplicity, classical studies of solid particles floatability consider idealized spherical particles (Scheludko et al. 1976; Crawford & Ralston 1988), we are following this approach here (see Fig. 1). It can be easily shown (Scheludko et al. 1976; Crawford & Ralston 1988) that the radius has a maximum value Rmax for θf = θc /2 andThe implications of this equation are discussed in the contexts of Titan, Enceladus and Europa. This analysis will be complemented by other discussions about bubbles and liquid droplets properties in extraterrestrial contexts. 
Title: Capillarity processes through the solar system
Description:
In everyday life, the manifestations of capillarity are countless, going from liquids ascension in fibers to the dynamics of bubbles and droplets.
On a scientific point of view, hydrodynamics of capillarity is a rather old field, but it is still the subject of very active researches (de Gennes et al.
2004; Drelich et al.
2020) with a wide variety of applications like micro-lenses or blood circulation.
The two last decades of space exploration have revealed the existence of several extraterrestrial liquid phases: liquid methane-ethane-nitrogen mixtures in Titan’s polar regions (Stofan et al.
2007), liquid water for Enceladus (Porco et al.
2006) and probably Europa (Sparks et al.
2017), while many evidence speak in favor of the massive presence of liquid water at the surface of Mars, billions years ago (Nazari-Sharabian et al.
2020).
If we consider the Bond number, we can easily show that for the same considered liquid, at the surface of celestial bodies where the gravity is smaller than the terrestrial one, the effects of capillarity may be significantly reinforced.
For instance, the small kronian satellite, Enceladus, has a crust dotted by cracks (Postberg et al.
2018), where the presence of liquid water is expected, the influence of capillarity should be strong there, compared to what we have at the surface of the Earth, since the gravity of Enceladus is aroung 0.
11 m s-2 , almost two orders of magnitude lower than the terrestrial value.
In this work, we address the problem of small solid particles flotation at the surface of a liquid.
We also investigate some properties of extraterrestrial rain droplets and their possible ground imprints.
We discuss the interaction of floating films with bubbles bursting, and we close our purpose by considering raindrops absorption into a porous soil.
All physical processes are questioned in the perspective of their potential geophysical implications, a particular focus is on what could be observed by Dragonfly, the future Titan’s in situ mission.
Fig.
1: Sketch of a spherical solid particle, of radius R and density ρ_sol , floating at the surface of a liquid with the density ρ_liq.
The meniscus (blue line) is represented by the equation z = f (x), the surface tension of the interface is σ, while the contact angle between the solid and the liquid is denoted θc; θf is the filling angle.
The difference of height between the plan of flotation and the surface of the unperturbated liquid is h_0 .
The local tangent to the meniscus has the angle ψ with the horizontal.
The gravity is represented by g.
An Example of process: the floatability by capillarityThe presence of some floating material, over an interface between a liquid phase and a gaseous phase, can yield to major consequences by affecting exchanges of energy, momentum and matter between the phases.
The form of this floating material may vary from a tiny monomolecular microlayer to a thick layer similar to sea ice.
At the surface of terrestrial oceans, the presence of a thin floating film, produced by biological activity (Lin et al.
2003), has a damping effect on wave activity; marine films is an important topic, and constitutes a full-fledged academic discipline (Gade et al.
2006).
Broadly speaking, a solid material is able to float at a liquid surface with the help a two physical processes: (1) the well known Archimede’s buyoancy force, for materials less dense than the liquid, (2) capillary forces.
This is the second effect we study in this paragraph.
The floatability generated by capillarity has been studied for a long time since it is very relevant for flotation industrial processes (Chipfunhu et al.
2011; Mousumi & Venugopal 2016; Kyzas & Matis 2018).
For the sake of simplicity, classical studies of solid particles floatability consider idealized spherical particles (Scheludko et al.
1976; Crawford & Ralston 1988), we are following this approach here (see Fig.
1).
It can be easily shown (Scheludko et al.
1976; Crawford & Ralston 1988) that the radius has a maximum value Rmax for θf = θc /2 andThe implications of this equation are discussed in the contexts of Titan, Enceladus and Europa.
This analysis will be complemented by other discussions about bubbles and liquid droplets properties in extraterrestrial contexts.
 .
Related Results
Solar Trackers Using Six-Bar Linkages
Solar Trackers Using Six-Bar Linkages
Abstract
A solar panel faces the sun or has the solar ray normal to its face to enhance power reaping. A fixed solar panel can only meet this condition at one moment...
Capillarity processes at Titan and beyond
Capillarity processes at Titan and beyond
<p>The manifestations of capillarity are countless in daily life, going from liquids ascension in fibers to the dynamics of bubbles and droplets. On a scientific poin...
Water Absorption, Moisture Content, and Capillarity Action in Wood: A Comparative Analysis of Fir, Pine, Beech, and Oak
Water Absorption, Moisture Content, and Capillarity Action in Wood: A Comparative Analysis of Fir, Pine, Beech, and Oak
Unique properties of wood such as being porous and ability to absorb water and capillary action make it widely used in many applications. It is important to understand how differen...
Study on a New Solar Thermal Energy Complementary Power Generation System Based on Gas-Steam Combined Cycle
Study on a New Solar Thermal Energy Complementary Power Generation System Based on Gas-Steam Combined Cycle
Abstract
The integrated solar energy-driven chiller combined cycle system (SCCC) has a problem of low annual solar energy utilization. The solar thermal efficiency a...
Solar Photosphere
Solar Photosphere
Abstract
The Sun is a G2V star with an effective temperature of 5780 K. As the nearest star to Earth and the biggest object in the solar system, it serves as a re...
SOLAR TRACKING SYSTEM USING ARDUINO
SOLAR TRACKING SYSTEM USING ARDUINO
This research focuses on the development of a solar tracking system using an Arduino microcontroller to optimize the energy efficiency of photovoltaic solar panels. The conventiona...
From Silicon to Sunlight: Exploring the Evolution of Solar Cell Materials
From Silicon to Sunlight: Exploring the Evolution of Solar Cell Materials
Examines the development and evolution of solar cell materials with a focus on how these changes have affected solar energy conversion's effectiveness, stability, and scalability...
AUGMENTATION OF SOLAR WATER DISTILLER PERFORMANCE WITH PV/T
AUGMENTATION OF SOLAR WATER DISTILLER PERFORMANCE WITH PV/T
Recently, due to global warming and urbanization, there are many major cities that may face the challenge of day zero next decades. Obviously, water is an indispensable component f...

