Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Simulation analysis of curing of filament wound carbon fiber composite shell
View through CrossRef
Abstract
To represent the temperature and degree of cure (DOC) more intuitively during the curing process of fiber-wound composite shell, wrote SDVINI, DISP, FILM, and HETVAL subroutines to characterize the fiber-wound composite curing process in ABAQUS. Comparing the temperature and DOC. The results indicate that the heat released from the resin curing process affects the internal temperature of the material, but the effect is small and can be ignored. The DOC on the surface of the fiber-wound shell during the curing process is slightly larger than that inside, but the difference is small and can be approximated as equal. And when the curing time is the same, the faster the heating rate, the faster the curing rate.
Title: Simulation analysis of curing of filament wound carbon fiber composite shell
Description:
Abstract
To represent the temperature and degree of cure (DOC) more intuitively during the curing process of fiber-wound composite shell, wrote SDVINI, DISP, FILM, and HETVAL subroutines to characterize the fiber-wound composite curing process in ABAQUS.
Comparing the temperature and DOC.
The results indicate that the heat released from the resin curing process affects the internal temperature of the material, but the effect is small and can be ignored.
The DOC on the surface of the fiber-wound shell during the curing process is slightly larger than that inside, but the difference is small and can be approximated as equal.
And when the curing time is the same, the faster the heating rate, the faster the curing rate.
Related Results
Three-Dimensional Thermo–Chemo–Mechanical Coupled Curing Analysis for the Filament Wound Composite Shell
Three-Dimensional Thermo–Chemo–Mechanical Coupled Curing Analysis for the Filament Wound Composite Shell
Carbon fiber resin-based composite materials are widely employed in the manufacturing of composite shells. During the curing process, the temperature gradients and cure degree grad...
PENGARUH PERAWATAN BETON (CURING) TERHADAP KUAT TEKAN BETON NORMAL
PENGARUH PERAWATAN BETON (CURING) TERHADAP KUAT TEKAN BETON NORMAL
Abstract— Concrete is a mixture consisting of sand, small stones, cement, and water that forms a solid mass. To produce good-quality concrete, concrete work control is needed, and ...
Karakteristik Luka Dan Penggunaan Balutan Luka Modern
Karakteristik Luka Dan Penggunaan Balutan Luka Modern
Abstract
The most frequent injuries are chronic wounds, where the number is increasing every year. The most common type of wound is diabetic ulcer and the next is cancerous w...
Design and analysis of dual-curing systems
Design and analysis of dual-curing systems
Dual-curing processing is a method to prepare thermoset materials through two polymerization reactions carried out
simultaneously or sequentially. In these processes, a firm under...
Experimental Study on Influencing Factors of Mixing Solidification Strength of Marine Soft Soil
Experimental Study on Influencing Factors of Mixing Solidification Strength of Marine Soft Soil
It is a common problem that the soft soil solidified strength by mixing is low. In order to search for the sensitive factors that affect the solidified strength, a certain marine s...
Characterization of a novel natural plant-based fiber from reddish shell bean as a potential reinforcement in bio-composites
Characterization of a novel natural plant-based fiber from reddish shell bean as a potential reinforcement in bio-composites
Abstract
The main aim of this study is to identify a new sustainable plant-based fiber extracted from the reddish shell bean plant to investigate its usage in polymer mat...
Numerical simulation research on curing process of composite overwrap considering a die model
Numerical simulation research on curing process of composite overwrap considering a die model
During curing process of composite overwrap the die shows a significant influence on the temperature field, curing degree distribution, and curing deformation. The curing process c...
Plastcementer
Plastcementer
English summary
Resin cements
532 – 7.
Tooth-coloured indirect restorations are becoming increasingly popular as alternatives to amalga...