Javascript must be enabled to continue!
Field-emission current densities of carbon nanotube under the different electric fields
View through CrossRef
The field emission current variation law of carbon nanotube in a large electric field range (0-32 V m-1) is analyzed in depth by combining the density functional theory with metal electron theory. The results show that their emission current densities are determined by their densities of states, the pseudogap, the length and the local electric field, showing the different variation laws in the different electric field ranges. In the lower electric field (corresponding macroscopic field is less than 18 Vm-1), when their density of states increases, their pseudogap decreases: the two trends are opposite, the former increases the number of electrons for emission, and the latter improves the ability to transfer electrons, they all turn to the increase of the emission current, so their field-emission current density increases linearly with increasing electric field in this range. But in the higher electric field (corresponding macroscopic field is less than 32 Vm-1 and more than 18 Vm-1), their densities of states and the pseudogaps take on the same decrease and increase, so do they in the opposite change case, therefore the emission current density behaves as a non-periodic oscillation in the increasing electric field, moreover the higher electric conductivity lead to the rising of current density, the combined effect of the emitter current density exhibits an oscillatory growth in this electric field range, and the carbon nanotubes behave as ionizing radiation. So the too high electric field may cause the emission current to be instable. The electric conductivity variation law of the metallic carbon nanotube is further studied in this paper. In the lower electric field (corresponding macroscopic field is less than 5 Vm-1), the electric conductivity of CNT increases linearly with increasing electric field; when the macroscopic electric field increases up to a value in a range from 5 to 14 Vm-1, the electric conductivity only changes like a slight concussion in (6.3-9.9)1017Sm-1 range, when the macroscopic electric field increases to a value in a range from 16 to 32 Vm-1, the electric conductivity appears as a sharp oscillation growth trend. Additionally, the specific binding energy of CNT is enhanced with increasing electric field, accordingly the structural stability turns better and the cone-capped carbon nanotubes could be used for emission cathode material. The calculation results are consistent with the experimental results of the literature.
Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
Title: Field-emission current densities of carbon nanotube under the different electric fields
Description:
The field emission current variation law of carbon nanotube in a large electric field range (0-32 V m-1) is analyzed in depth by combining the density functional theory with metal electron theory.
The results show that their emission current densities are determined by their densities of states, the pseudogap, the length and the local electric field, showing the different variation laws in the different electric field ranges.
In the lower electric field (corresponding macroscopic field is less than 18 Vm-1), when their density of states increases, their pseudogap decreases: the two trends are opposite, the former increases the number of electrons for emission, and the latter improves the ability to transfer electrons, they all turn to the increase of the emission current, so their field-emission current density increases linearly with increasing electric field in this range.
But in the higher electric field (corresponding macroscopic field is less than 32 Vm-1 and more than 18 Vm-1), their densities of states and the pseudogaps take on the same decrease and increase, so do they in the opposite change case, therefore the emission current density behaves as a non-periodic oscillation in the increasing electric field, moreover the higher electric conductivity lead to the rising of current density, the combined effect of the emitter current density exhibits an oscillatory growth in this electric field range, and the carbon nanotubes behave as ionizing radiation.
So the too high electric field may cause the emission current to be instable.
The electric conductivity variation law of the metallic carbon nanotube is further studied in this paper.
In the lower electric field (corresponding macroscopic field is less than 5 Vm-1), the electric conductivity of CNT increases linearly with increasing electric field; when the macroscopic electric field increases up to a value in a range from 5 to 14 Vm-1, the electric conductivity only changes like a slight concussion in (6.
3-9.
9)1017Sm-1 range, when the macroscopic electric field increases to a value in a range from 16 to 32 Vm-1, the electric conductivity appears as a sharp oscillation growth trend.
Additionally, the specific binding energy of CNT is enhanced with increasing electric field, accordingly the structural stability turns better and the cone-capped carbon nanotubes could be used for emission cathode material.
The calculation results are consistent with the experimental results of the literature.
Related Results
Novel Methodology for Delivering Putrescine into the Apple Explants Using Hormone Anchored Nanotube
Novel Methodology for Delivering Putrescine into the Apple Explants Using Hormone Anchored Nanotube
Abstract
Multi wall carbon nanotubes have been successfully exploited as growth regulator for manipulation of plant development. Also, nanoparticles are gradually involved ...
EPD Electronic Pathogen Detection v1
EPD Electronic Pathogen Detection v1
Electronic pathogen detection (EPD) is a non - invasive, rapid, affordable, point- of- care test, for Covid 19 resulting from infection with SARS-CoV-2 virus. EPD scanning techno...
Influence of the Chemical Modification of Carbon Nanotube Fibers on Electrical properties and Electromechanical Response
Influence of the Chemical Modification of Carbon Nanotube Fibers on Electrical properties and Electromechanical Response
The electromechanical response (EMR) of carbon nanotube (CNT) fibers is related to the densification process of the CNT network driven by electromagnetic force. The study of the in...
Functionalization of carbon nanotubes
Functionalization of carbon nanotubes
Carbon nanotubes have unique properties that make them attractive for different engineering applications. However, because of their chemical inertness, carbon nanotubes have to be ...
Controlling the multipolar interference of nanoantennas
Controlling the multipolar interference of nanoantennas
The emission and detection of light is a main pillar of both fundamental research and the
advancement of modern technologies. From digital communications and quantum computing
to...
Electrokinetic energy conversion efficiency in a polyelectrolyte-grafted nanotube
Electrokinetic energy conversion efficiency in a polyelectrolyte-grafted nanotube
Analytical investigations are performed for pressure driven flow of an electrically conducting, incompressible and viscous fluid in a polyelectrolyte-grafted nanotube by using Bess...
Localized nanoscale induction by single domain magnetic particles
Localized nanoscale induction by single domain magnetic particles
AbstractSingle domain magnetic nanoparticles are increasingly investigated as actuators of biological and chemical processes that respond to externally applied magnetic fields. Alt...
Mechanochemistry of Phosphate Esters with External Electric Fields
Mechanochemistry of Phosphate Esters with External Electric Fields
The growth of tribofilms from the mechanochemical decomposition of lubricant additives is crucial to prevent wear of sliding metal surfaces. For some applications, such as electric...


