Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Preparation and Characterisation of Proton Exchange Membranes Based on Crosslinked Polybenzimidazole and Phosphoric Acid

View through CrossRef
AbstractCrosslinked polybenzimidazole (PBI) was synthesised via free radical polymerisation between N‐vinylimidazole and vinylbenzyl substituted PBI. The degree of crosslinking increases with increasing content of the crosslinker. The phosphoric acid doping behaviour, mechanical properties, proton conductivity and acid migration stability of crosslinked PBI and linear PBI are discussed. The results show that the acid doping ability decreases with increasing degree of crosslinking of PBI. The introduction of N‐vinylimidazole in PBI is beneficial to its oxidation stability. The mechanical stability of crosslinked PBI/H3PO4 membrane is better than that of linear PBI/H3PO4 membrane. The proton conductivity of the acid doped membranes can reach ∼10–4 S cm–1 for crosslinked PBI/H3PO4 composite membranes at 150 °C. The temperature dependence of proton conductivity of the acid doped membranes can be modelled by an Arrhenius relation. The proton conductivity of crosslinked PBI/H3PO4 composite membranes is a little lower than that of linear PBI/H3PO4 membranes with the same acid content. However, the migration stability of H3PO4 in crosslinked PBI/H3PO4 membranes is improved compared with that of linear PBI/H3PO4 membranes.
Title: Preparation and Characterisation of Proton Exchange Membranes Based on Crosslinked Polybenzimidazole and Phosphoric Acid
Description:
AbstractCrosslinked polybenzimidazole (PBI) was synthesised via free radical polymerisation between N‐vinylimidazole and vinylbenzyl substituted PBI.
The degree of crosslinking increases with increasing content of the crosslinker.
The phosphoric acid doping behaviour, mechanical properties, proton conductivity and acid migration stability of crosslinked PBI and linear PBI are discussed.
The results show that the acid doping ability decreases with increasing degree of crosslinking of PBI.
The introduction of N‐vinylimidazole in PBI is beneficial to its oxidation stability.
The mechanical stability of crosslinked PBI/H3PO4 membrane is better than that of linear PBI/H3PO4 membrane.
The proton conductivity of the acid doped membranes can reach ∼10–4 S cm–1 for crosslinked PBI/H3PO4 composite membranes at 150 °C.
The temperature dependence of proton conductivity of the acid doped membranes can be modelled by an Arrhenius relation.
The proton conductivity of crosslinked PBI/H3PO4 composite membranes is a little lower than that of linear PBI/H3PO4 membranes with the same acid content.
However, the migration stability of H3PO4 in crosslinked PBI/H3PO4 membranes is improved compared with that of linear PBI/H3PO4 membranes.

Related Results

Use of Organic Solvent Nanofiltration (OSN) membranes for Counter-Current Chromatography (CCC) solvent recovery
Use of Organic Solvent Nanofiltration (OSN) membranes for Counter-Current Chromatography (CCC) solvent recovery
Solvent resistant membranes are a relatively new technology which has the potential to expand the possible utilities of membranes for process industries. Little is known in terms o...
MO‐SAM‐BRB‐02: Proton Physics and Technology
MO‐SAM‐BRB‐02: Proton Physics and Technology
The dose localization advantages of proton beams derive primarily from the Bragg peak in the proton stopping distribution. Therefore, the potential clinical gains expected form pro...
Thermoreversible Gelation of Polybenzimidazole in Phosphoric Acid
Thermoreversible Gelation of Polybenzimidazole in Phosphoric Acid
AbstractSummary: We report a study of thermoreversible gelation of polybenzimidazole (PBI) in phosphoric acid (PA). The PBI gel in PA exhibits fibrillar network morphology and reve...
Proton Conductive, Low Methanol Crossover Cellulose-Based Membranes
Proton Conductive, Low Methanol Crossover Cellulose-Based Membranes
This work describes the development of sulfated cellulose (SC) polymer and explores its potential as an electrolyte-membrane for direct methanol fuel cells (DMFC). The fabrication ...
Computer simulation of an excess proton in aqueous systems
Computer simulation of an excess proton in aqueous systems
This thesis aims at studying the microscopic physical-chemical properties of an excess proton in aqueous systems. From bulk water environments to narrow hydrophobic channels constr...
Profiled Ion-Exchange Membranes for Reverse and Conventional Electrodialysis
Profiled Ion-Exchange Membranes for Reverse and Conventional Electrodialysis
Profiled ion-exchange membranes are promising for improving the parameters of reverse electrodialysis due to the reduction of pumping power and electrical resistance. The smooth co...
STABILITY TOLERANCE OF SUNFLOWER OIL -IN-WATER EMULSION EMULSIFIED BY SOYA LECITHIN FOR FOOD GRADE ACIDS
STABILITY TOLERANCE OF SUNFLOWER OIL -IN-WATER EMULSION EMULSIFIED BY SOYA LECITHIN FOR FOOD GRADE ACIDS
Oil-in-water emulsion has promised values in food, pharmaceutical, drug, cosmetic and allied industries. The stable emulsion with long shelf life increases its utility. Many avouri...

Back to Top