Javascript must be enabled to continue!
Early Miocene Thrust Tectonics on Raukumara Peninsula, Northeastern New Zealand
View through CrossRef
<p>Raukumara Peninsula lies at the northeastern end of the East Coast Deformed Belt, a province of deformed Late Mesozoic-Late Cenozoic rocks on the eastern edges of the North Island and northern South Island of New Zealand. Late Cenozoic deformation in this province is associated with westward subduction of the Pacific Plate, which started at about the beginning of the Miocene. Early Miocene tectonism on Raukumara Peninsula took place in a hitherto little-known thrust belt, the East Coast Allochthon. The configuration, evolution and origin of this thrust belt are the subjects of this thesis. The thrust belt extends 110 km from the thrust front in the southwest to the northeastern tip of Raukumara Peninsula. Internal structures strike northwest, perpendicular to the present trend of the continental margin but parallel to the Early Miocene trend suggested by plate reconstructions and paleomagnetic studies. The structure and kinematic evolution of the thrust belt were investigated by detailed mapping of three key areas in its central part and by analysis of previous work throughout the region. Gross differences in structure lead to the division of the belt into three zones: southern, central and northern. Deformation in the southern and central zones (the southwestern two-thirds of the system) was thin-skinned, involving southwestward transport of thrust sheets above a decollement horizon at the top of the Maastrichtian-Paleocene Whangai Formation. The decollement is exposed in the northwest due to southeastward tilting accompanying post-Miocene uplift of the Raukumara Range. Deformation in the northern zone involved reactivations of northeast-directed Cretaceous thrusts as well as southwestward emplacement of allochthonous sheets. Stratigraphic relationships show that thrusting took place during = 6 m.y. in the earliest Miocene. The 18 km wide southern zone is an emergent imbricate fan of rocks detached from above the Whangai Formation in a piggy-back sequence and transported less than about 18 km at rates of 2.6-3.6 mm/yr (plus-minus 20%-100%). The central and northern zones include rocks older than Whangai Formation. The sheets of the central zone and the southwest-directed sheets of the northern zone make up three major allochthonous units: the Waitahaia allochthon, consisting predominantly of mid-Cretaceous flysch above the Waitahaia Fault and equivalent structures, at the bottom of the thrust pile; the Te Rata allochthon, of Late Cretaceous-Early Tertiary continental margin sediments above the Te Rata Thrust, in the middle; and the Matakaoa sheet, an ophiolite body of mid-Cretaceous-Eocene basaltic and pelagic sedimentary rocks, at the top and back of the thrust belt. The Waitahaia allochthon was emplaced first and was subsequently breached by the Te Rata Thrust. The mid-Cretaceous rocks of the Waitahaia allochthon are mostly overturned, a result of the southwest-directed Early Miocene thrusting overprinting a Cretaceous structure of predominantly southwestward dips. The Te Rata allochthon comprises a complex pile of thrust sheets and slices with a general older-on-younger stacking order but with common reversals. Synorogenic sedimentary rocks occur within it. The complexity of internal structure of these two allochthons suggests they have undergone more than the 50% shortening estimated for the southern zone. The minimum southwestward displacement of the Te Rata allochthon is 60 km. The minimum displacements of the Waitahaia and Matakaoa allochthons are 55-195 km and 115-530 km respectively, depending on whether the Te Rata allochthon originally lay in front of the original position of the Waitahaia allochthon or was originally the upper part of the Waitahaia allochthon, and on the amounts of internal shortening of the allochthons. Over the = 6 m.y. period of thrusting, these estimates imply displacement rates for the Matakaoa sheet of 19-88 mm/yr. The average plate convergence rate at East Cape for the period 36-20 Ma is estimated at 25-30 mm/yr; the rate for the Early Miocene-- when subduction was active--may have been faster. Reasonable displacement rates for the Matakaoa sheet would result if the Te Rata allochthon was originally the upper part of the Waitahaia allochthon and if both allochthons have been shortened somewhat less than 50%. The emplacement mechanism of the Matakaoa ophiolite is elucidated by comparison with Northland, northwest along strike from Raukumara Peninsula, onto which correlative rocks were emplaced at the same time. The thinness of the Northland ophiolite bodies, their composition of rocks typical of the uppermost levels of oceanic crust, and the start of andesitic volcanism accompanying their obduction show that they were emplaced as a thin flake of oceanic crust which peeled off the downgoing slab during the inception of southwestward subduction. The reason the ophiolites were initially peeled from the slab is probably that their upper levels prograded southwestward over sediments of the Northland-Raukumara continental margin. In such a situation, initial compression would have led to formation of a northeast-dipping thrust at the volcanic/sediment interface; this thrust would then have propagated back into the downgoing plate with continued convergence, allowing the ophiolites to climb up the continental slope pushing the allochthonous sedimentary sheets ahead of them.</p>
Title: Early Miocene Thrust Tectonics on Raukumara Peninsula, Northeastern New Zealand
Description:
<p>Raukumara Peninsula lies at the northeastern end of the East Coast Deformed Belt, a province of deformed Late Mesozoic-Late Cenozoic rocks on the eastern edges of the North Island and northern South Island of New Zealand.
Late Cenozoic deformation in this province is associated with westward subduction of the Pacific Plate, which started at about the beginning of the Miocene.
Early Miocene tectonism on Raukumara Peninsula took place in a hitherto little-known thrust belt, the East Coast Allochthon.
The configuration, evolution and origin of this thrust belt are the subjects of this thesis.
The thrust belt extends 110 km from the thrust front in the southwest to the northeastern tip of Raukumara Peninsula.
Internal structures strike northwest, perpendicular to the present trend of the continental margin but parallel to the Early Miocene trend suggested by plate reconstructions and paleomagnetic studies.
The structure and kinematic evolution of the thrust belt were investigated by detailed mapping of three key areas in its central part and by analysis of previous work throughout the region.
Gross differences in structure lead to the division of the belt into three zones: southern, central and northern.
Deformation in the southern and central zones (the southwestern two-thirds of the system) was thin-skinned, involving southwestward transport of thrust sheets above a decollement horizon at the top of the Maastrichtian-Paleocene Whangai Formation.
The decollement is exposed in the northwest due to southeastward tilting accompanying post-Miocene uplift of the Raukumara Range.
Deformation in the northern zone involved reactivations of northeast-directed Cretaceous thrusts as well as southwestward emplacement of allochthonous sheets.
Stratigraphic relationships show that thrusting took place during = 6 m.
y.
in the earliest Miocene.
The 18 km wide southern zone is an emergent imbricate fan of rocks detached from above the Whangai Formation in a piggy-back sequence and transported less than about 18 km at rates of 2.
6-3.
6 mm/yr (plus-minus 20%-100%).
The central and northern zones include rocks older than Whangai Formation.
The sheets of the central zone and the southwest-directed sheets of the northern zone make up three major allochthonous units: the Waitahaia allochthon, consisting predominantly of mid-Cretaceous flysch above the Waitahaia Fault and equivalent structures, at the bottom of the thrust pile; the Te Rata allochthon, of Late Cretaceous-Early Tertiary continental margin sediments above the Te Rata Thrust, in the middle; and the Matakaoa sheet, an ophiolite body of mid-Cretaceous-Eocene basaltic and pelagic sedimentary rocks, at the top and back of the thrust belt.
The Waitahaia allochthon was emplaced first and was subsequently breached by the Te Rata Thrust.
The mid-Cretaceous rocks of the Waitahaia allochthon are mostly overturned, a result of the southwest-directed Early Miocene thrusting overprinting a Cretaceous structure of predominantly southwestward dips.
The Te Rata allochthon comprises a complex pile of thrust sheets and slices with a general older-on-younger stacking order but with common reversals.
Synorogenic sedimentary rocks occur within it.
The complexity of internal structure of these two allochthons suggests they have undergone more than the 50% shortening estimated for the southern zone.
The minimum southwestward displacement of the Te Rata allochthon is 60 km.
The minimum displacements of the Waitahaia and Matakaoa allochthons are 55-195 km and 115-530 km respectively, depending on whether the Te Rata allochthon originally lay in front of the original position of the Waitahaia allochthon or was originally the upper part of the Waitahaia allochthon, and on the amounts of internal shortening of the allochthons.
Over the = 6 m.
y.
period of thrusting, these estimates imply displacement rates for the Matakaoa sheet of 19-88 mm/yr.
The average plate convergence rate at East Cape for the period 36-20 Ma is estimated at 25-30 mm/yr; the rate for the Early Miocene-- when subduction was active--may have been faster.
Reasonable displacement rates for the Matakaoa sheet would result if the Te Rata allochthon was originally the upper part of the Waitahaia allochthon and if both allochthons have been shortened somewhat less than 50%.
The emplacement mechanism of the Matakaoa ophiolite is elucidated by comparison with Northland, northwest along strike from Raukumara Peninsula, onto which correlative rocks were emplaced at the same time.
The thinness of the Northland ophiolite bodies, their composition of rocks typical of the uppermost levels of oceanic crust, and the start of andesitic volcanism accompanying their obduction show that they were emplaced as a thin flake of oceanic crust which peeled off the downgoing slab during the inception of southwestward subduction.
The reason the ophiolites were initially peeled from the slab is probably that their upper levels prograded southwestward over sediments of the Northland-Raukumara continental margin.
In such a situation, initial compression would have led to formation of a northeast-dipping thrust at the volcanic/sediment interface; this thrust would then have propagated back into the downgoing plate with continued convergence, allowing the ophiolites to climb up the continental slope pushing the allochthonous sedimentary sheets ahead of them.
</p>.
Related Results
Geodynamics and Structural Evolution of Makran Accretionary Prism, Arabian-Eurasian Convergent Plate Boundary
Geodynamics and Structural Evolution of Makran Accretionary Prism, Arabian-Eurasian Convergent Plate Boundary
The complex interplay between thrust wedge deformation, tectonically-induced fluid overpressures, and the complex phases of wedge-top sedimentary depositional systems in accretiona...
Thrust density characteristics of ion thruster
Thrust density characteristics of ion thruster
Thrust density distribution of ion thruster is an important factor that affects the orbit correction and station keeping of the spacecraft. Current empirical models mainly concern ...
Thrust Wedge Dominated Multilayered Propagation Using Finite Strain Sandbox Modeling: Growth of the Western Xuefeng Fold‐Thrust Belt, South China Block
Thrust Wedge Dominated Multilayered Propagation Using Finite Strain Sandbox Modeling: Growth of the Western Xuefeng Fold‐Thrust Belt, South China Block
AbstractFormation and propagation of thrust wedges in foreland fold–thrust belts are critical for the horizontal growth of orogenic belts. Based on the multilayered detachment syst...
Turbojet direct-thrust control scheme for full-envelope fuel consumption minimization
Turbojet direct-thrust control scheme for full-envelope fuel consumption minimization
Purpose
Reducing fuel consumption of unmanned aerial vehicles (UAVs) during transient operation is a cornerstone to achieve environment-friendly operations. The purpose of this pap...
Colour Printing in the Uttermost Part of the Sea: a Study of the Colour Print Products, Printers, Technology and Markets in New Zealand, 1830-1914
Colour Printing in the Uttermost Part of the Sea: a Study of the Colour Print Products, Printers, Technology and Markets in New Zealand, 1830-1914
<p>This thesis is an historical study of the development and the relationships between some aspects of colour printing in New Zealand from 1830 to 1914, including the practit...
The Exhumation History of North Qaidam Thrust Belt Constrained by Apatite Fission Track Thermochronology: Implication for the Evolution of the Tibetan Plateau
The Exhumation History of North Qaidam Thrust Belt Constrained by Apatite Fission Track Thermochronology: Implication for the Evolution of the Tibetan Plateau
AbstractDetermining the spatio‐temporal distribution of the deformation tied to the India‐Eurasian convergence and the impact of pre‐existing weaknesses on the Cenozoic crustal def...
Structural architecture of the Georgian part of active Kura foreland fold-and-thrust belt
Structural architecture of the Georgian part of active Kura foreland fold-and-thrust belt
Based on an interpreted seismic profile combined with field geologic and borehole data, here we present a structural model of the Georgian part of active Kura foreland th...
Scrutiny of Tongue Thrust: A Comprehensive Review.
Scrutiny of Tongue Thrust: A Comprehensive Review.
Abstract
Background –
The different abnormal habits may affect orofacial structures and presence of even a single habit can be reason behind inducing a new habit. Basically, tongue...


