Javascript must be enabled to continue!
Acoustic Wave-Driven Liquid Metal Expansion
View through CrossRef
In this paper, we report a volume expansion phenomenon of a liquid metal droplet naturally oxidized in an ambient environment by applying an acoustic wave. An oxidized gallium-based liquid metal droplet was placed on a paper towel, and a piezo-actuator was attached underneath it. When a liquid metal droplet was excited by acoustic wave, the volume of liquid metal was expanded due to the inflow of air throughout the oxide crack. The liquid metal without the oxide layer cannot be expanded with an applied acoustic wave. To confirm the effect of the expansion of the oxidized liquid metal droplet, we measured an expansion ratio, which was calculated by comparing the expanded size in the x (horizontal), y (vertical) axis to the initial size of the liquid metal droplet, using a high-speed camera. For various volumes of the droplet, when we applied various voltages in the range of 5~8 Vrms with 18.5~24.5 kHz using the piezo-actuator, we obtained a maximum expansion ratio of 2.4 in the x axis and 3.8 in the y axis, respectively. In addition, we investigated that the time to reach the maximum expansion in proportion to the volume size of liquid metal differed by five times from 4 s to 20 s, and that the time to maintain the maximum expansion differed from 23 s to 2.5 s, which was inversely proportional to the volume size. We also investigated the expansion ratios depending on the exposure time to the atmosphere. Finally, a circuit containing LED, which can be turned on by expanded liquid metal droplet, was demonstrated.
Title: Acoustic Wave-Driven Liquid Metal Expansion
Description:
In this paper, we report a volume expansion phenomenon of a liquid metal droplet naturally oxidized in an ambient environment by applying an acoustic wave.
An oxidized gallium-based liquid metal droplet was placed on a paper towel, and a piezo-actuator was attached underneath it.
When a liquid metal droplet was excited by acoustic wave, the volume of liquid metal was expanded due to the inflow of air throughout the oxide crack.
The liquid metal without the oxide layer cannot be expanded with an applied acoustic wave.
To confirm the effect of the expansion of the oxidized liquid metal droplet, we measured an expansion ratio, which was calculated by comparing the expanded size in the x (horizontal), y (vertical) axis to the initial size of the liquid metal droplet, using a high-speed camera.
For various volumes of the droplet, when we applied various voltages in the range of 5~8 Vrms with 18.
5~24.
5 kHz using the piezo-actuator, we obtained a maximum expansion ratio of 2.
4 in the x axis and 3.
8 in the y axis, respectively.
In addition, we investigated that the time to reach the maximum expansion in proportion to the volume size of liquid metal differed by five times from 4 s to 20 s, and that the time to maintain the maximum expansion differed from 23 s to 2.
5 s, which was inversely proportional to the volume size.
We also investigated the expansion ratios depending on the exposure time to the atmosphere.
Finally, a circuit containing LED, which can be turned on by expanded liquid metal droplet, was demonstrated.
Related Results
Wave Force Calculations for Stokes and Non-Stokes Waves
Wave Force Calculations for Stokes and Non-Stokes Waves
ABSTRACT
A new wave particle velocity procedure permits calculation of forces from regular wave profiles of more or less arbitrary wave crest to height ratios, as...
Hurricane Eloise Directional Wave Energy Spectra
Hurricane Eloise Directional Wave Energy Spectra
ABSTRACT
Directiona1 wave energy spectra, calculated from data recorded during Hurricane Eloise (Gulf of Mexico, 1975), are presented. The spectra, based on an en...
RELATIONSHIP BETWEEN ATRIAL FIBRILLATION CARDIOVERSION AND F
RELATIONSHIP BETWEEN ATRIAL FIBRILLATION CARDIOVERSION AND F
Objectives
To investigate the relationship between atrial fibrillation cardioversion and f wave in electrocardiogram, providing an ordinary and noninvasive method...
SS: FPSOs and Floating Production Systems: Wave Measurements for the Monitas System
SS: FPSOs and Floating Production Systems: Wave Measurements for the Monitas System
ABSTRACT
The paper is one of the series of papers about the Advisory Monitoring System for controlling the fatigue lifetime consumption of FPSO hulls. The system ...
The research of LWD acoustic isolator based on SAW spatial separation
The research of LWD acoustic isolator based on SAW spatial separation
Acoustic logging while drilling (LWD) can extract P-wave and S-wave information from the formation. However, the transmission of the collar wave propagated directly from the emitte...
Energy Conversion Efficiency of Wave Gliders
Energy Conversion Efficiency of Wave Gliders
Wave gliders are a new type of ocean observation platform that can gain forward power by receiving and converting wave energy. The ability of wave gliders to turn waves determines ...
On the Acoustic Radiation Force Affecting Two Liquid Drops Located in the Wave Field
On the Acoustic Radiation Force Affecting Two Liquid Drops Located in the Wave Field
A system of initially immobile spherical liquid drops placed in another liquid in the field of a propagating acoustic wave is considered. The acoustic radiation force acting on eac...
Acoustic cloaking design based on penetration manipulation with combination acoustic metamaterials
Acoustic cloaking design based on penetration manipulation with combination acoustic metamaterials
The acoustic wave transmission manipulation ability is the most important performance for the acoustic metamaterials. To manipulate the acoustic transmission, the combination acous...

