Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

COLLECTION AND PHYSICAL CHARACTERIZATION OF AIRBORNE PARTICULATES

View through CrossRef
Airborne particulates are one of the most complex air pollutants and considerable concern surrounds their environmental impact especially with regards to human health. An investigation on the efficiency of various total inhalable and respirable dust samplers has been conducted to identify the most convenient way of collecting dust particles to examine their physical characteristics. The efficiency of a variety of dust samplers were investigated using limestone dust clouds generated inside an environmental dust chamber. Various sampling periods were employed to establish dust concentrations in the environmental dust chamber. The experimental dust cloud was found to contain on average 55.74 % of respirable dust as defined by different instruments while a consistent dust concentration of approx 200 mg/m3 was repeatedly produced. The methods for collecting and estimating airborne asbestos fibre concentrations were studied and found to be extremely limited. Standard optical techniques grossly underestimated both airborne fibre concentrations and respirable dimensions of fibres. The size and dimensions of respirable asbestos fibres are defined by their ability to gain access to the lungs and there is no instrument or technique available at present, which will allow collection and estimation of respirable fibrous dust clouds. A comparison of coal dust particles with similar particles retained in the lungs has shown a difference from the predicted respirable fractions as proposed by the British Medical Research Council (BMRC) and other conventions. Respirable dust sampling instruments may therefore be more suited forsampling larger particles. The difficulty in estimating the characteristics of airborne particulate material has been demonstrated by illustrating urban particulate collection and analysis. The extremely large differences in terms of physical size, and aerodynamic properties of dust particles formed by different materials have been demonstrated. Cardiff University
Title: COLLECTION AND PHYSICAL CHARACTERIZATION OF AIRBORNE PARTICULATES
Description:
Airborne particulates are one of the most complex air pollutants and considerable concern surrounds their environmental impact especially with regards to human health.
An investigation on the efficiency of various total inhalable and respirable dust samplers has been conducted to identify the most convenient way of collecting dust particles to examine their physical characteristics.
The efficiency of a variety of dust samplers were investigated using limestone dust clouds generated inside an environmental dust chamber.
Various sampling periods were employed to establish dust concentrations in the environmental dust chamber.
The experimental dust cloud was found to contain on average 55.
74 % of respirable dust as defined by different instruments while a consistent dust concentration of approx 200 mg/m3 was repeatedly produced.
The methods for collecting and estimating airborne asbestos fibre concentrations were studied and found to be extremely limited.
Standard optical techniques grossly underestimated both airborne fibre concentrations and respirable dimensions of fibres.
The size and dimensions of respirable asbestos fibres are defined by their ability to gain access to the lungs and there is no instrument or technique available at present, which will allow collection and estimation of respirable fibrous dust clouds.
A comparison of coal dust particles with similar particles retained in the lungs has shown a difference from the predicted respirable fractions as proposed by the British Medical Research Council (BMRC) and other conventions.
Respirable dust sampling instruments may therefore be more suited forsampling larger particles.
The difficulty in estimating the characteristics of airborne particulate material has been demonstrated by illustrating urban particulate collection and analysis.
The extremely large differences in terms of physical size, and aerodynamic properties of dust particles formed by different materials have been demonstrated.
Cardiff University.

Related Results

Evaluating the Science to Inform the Physical Activity Guidelines for Americans Midcourse Report
Evaluating the Science to Inform the Physical Activity Guidelines for Americans Midcourse Report
Abstract The Physical Activity Guidelines for Americans (Guidelines) advises older adults to be as active as possible. Yet, despite the well documented benefits of physical a...
Glass particulate adulterated in single dose ampoules: A patient safety concern
Glass particulate adulterated in single dose ampoules: A patient safety concern
AbstractAims and objectivesTo determine the amount, size and characteristics of glass particulate contamination inside single‐dose ampoules.BackgroundGlass particulate contaminatio...
Particle Based Model for Airborne Disease Transmission
Particle Based Model for Airborne Disease Transmission
Executive Summary Prior literature documents cases of airborne infectious disease transmission at distances ranging from ≥ 2 m to inter-continental in scale. Physic...
Waiting areas in tertiary-care hospitals in Pakistan, a major risk for airborne infections
Waiting areas in tertiary-care hospitals in Pakistan, a major risk for airborne infections
Dear Madam, An airborne infection is any disorder transmitted through the air and caused by microorganisms including bacteria, viruses, and fungi. The most common disorders transmi...
Characterization of Solid Particulates to Be Used as Storage as Well as Heat Transfer Medium in Concentrated Solar Power Systems
Characterization of Solid Particulates to Be Used as Storage as Well as Heat Transfer Medium in Concentrated Solar Power Systems
Using solid particulates as a heat transfer medium for concentrated solar power (CSP) systems has many advantages, positioning them as a superior option compared with conventional ...
Adsorption of Coliphages to Particulates
Adsorption of Coliphages to Particulates
Adsorption characteristics of coliphages (host cell: E. coli B) to particulates (kaolin, sand, soil, microbial particulates in an oxidation pond) were investigated using batch expe...
VLP-Based Model for Study of Airborne Viral Pathogens
VLP-Based Model for Study of Airborne Viral Pathogens
Abstract The recent COVID-19 pandemic has underscored the danger of airborne viral pathogens. The lack of model systems to study airborne pathogens limits the under...
Assessment of the TROPOMI tropospheric NO2 product based on recurrent airborne campaigns
Assessment of the TROPOMI tropospheric NO2 product based on recurrent airborne campaigns
<p>Sentinel-5 precursor (S-5p), launched on 13 October 2017, is the first mission of the Copernicus Programme dedicated to the monitoring of air quality, climate, ozo...

Back to Top