Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Rock Fracture Toughness Determination with Chevron-Notched and Straight-Through-Notched Three-Point Bend Round Bar Specimens
View through CrossRef
Chevron-notched and straight-through-notched three-point bend round bar specimens were used to test fracture toughness of a Chongqing limestone. Comparable values were obtained from these two kinds of specimens, but the chevron-notched specimens had the merits of easiness for deducing and detecting overloading, less the possibility for deviation of crack growth from notch plane, and a included nonlinear correction factor in fracture toughness calculation. However, there was some size effect for chevron-notched specimens; the test values increased with increment in crack length and diameter.
ASTM International100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959
Title: Rock Fracture Toughness Determination with Chevron-Notched and Straight-Through-Notched Three-Point Bend Round Bar Specimens
Description:
Chevron-notched and straight-through-notched three-point bend round bar specimens were used to test fracture toughness of a Chongqing limestone.
Comparable values were obtained from these two kinds of specimens, but the chevron-notched specimens had the merits of easiness for deducing and detecting overloading, less the possibility for deviation of crack growth from notch plane, and a included nonlinear correction factor in fracture toughness calculation.
However, there was some size effect for chevron-notched specimens; the test values increased with increment in crack length and diameter.
Related Results
A Review of Chevron-Notched Fracture Specimens
A Review of Chevron-Notched Fracture Specimens
This paper reviews the historical development of chevron-notched fracture specimens; it also compares stress-intensity factors and load line displacement solutions that have been p...
Stochastic Propagation of Discrete Fracture Networks
Stochastic Propagation of Discrete Fracture Networks
This reference is for an abstract only. A full paper was not submitted for this conference.
Abstract
Fractures are ubiquitous st...
Pragmatic Trends for Estimating Constraint Effects on Upper-Shelf Fracture Toughness for Pipe Flaw Evaluation
Pragmatic Trends for Estimating Constraint Effects on Upper-Shelf Fracture Toughness for Pipe Flaw Evaluation
Abstract
During efforts for a PRCI project to assess the toughness for critical flaw size evaluations of vintage axially surface-cracked line-pipe steels for the DOT...
Interfacial fracture of hydrogen bonded double network and ionically bonded polyampholyte hydrogels
Interfacial fracture of hydrogen bonded double network and ionically bonded polyampholyte hydrogels
Understanding hydrogel-hydrogel adhesion is critical for designing materials used in biomedical, electronic, and energy applications, where precise interfacial bonding is essential...
Linkage of Fracture Assessment Methodology With Fracture Toughness Testing Procedures
Linkage of Fracture Assessment Methodology With Fracture Toughness Testing Procedures
Abstract
J-Integral, J, is a commonly accepted elastic-plastic fracture mechanics parameter defined as the amount of energy released per unit area of crack surface i...
Sequential Propagation of Multiple Fractures in Horizontal Wells
Sequential Propagation of Multiple Fractures in Horizontal Wells
ABSTRACT:
Simultaneous fracturing and zipper fracturing of horizontal wells has rapidly evolved to the development of unconventional oil and gas. The fracture int...
Experimental Investigation on the Effects of Proppant Migration and Placement on the Conductivity in Rough Fractures
Experimental Investigation on the Effects of Proppant Migration and Placement on the Conductivity in Rough Fractures
ABSTRACT
Proppant conductivity was usually measured under static or designed proppant concentration. The ISO 13503-5 standard provides specific experimental proce...
Fracture Modelling Using Seismic Based Fracture Intensity Volume, a Case Study in Middle East
Fracture Modelling Using Seismic Based Fracture Intensity Volume, a Case Study in Middle East
Abstract
In this paper, a case study in a fractured carbonate reservoir is presented to demonstrate the approach of fracture modeling using fracture intensity vol...