Dislocation structure analysis in the strain gradient of torsion loading: a comparison between modelling and experiment

Abstract Complex stress states due to torsion lead to dislocation structures characteristic for the chosen torsion axis. The formation mechanism of these structures and the link to the overall plastic deformation are unclear. Experiments allow the analysis of cross sections only ex situ or are limited in spacial resolution which prohibits the identification of the substructures which form within the volume. Discrete dislocation dynamics simulations give full access to the dislocation structure and their evolution in time. By combining both approaches and comparing similar measures the dislocation structure formation in torsion loading of micro wires is explained. For the ⟨100⟩ torsion axis, slip traces spanning the entire sample in both simulation and experiment are observed. They are caused by collective motion of dislocations on adjacent slip planes. Thus these slip traces are not atomically sharp. Torsion loading around a ⟨111⟩ axis favors plasticity on the primary slip planes perpendicular to the torsion axis and dislocation storage through cross-slip and subsequent collinear junction formation. Resulting hexagonal dislocation networks patches are small angle grain boundaries. Both, experiments and discrete dislocation simulations show that dislocations cross the neutral fiber. This feature is discussed in light of the limits of continuum descriptions of plasticity.