Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

The change of microstructure in deuteron-implanted aluminum under electron irradiation

View through CrossRef
As known for a long time, bubbles in liquid would emit light under ultrasonic waves. This experiment, called sonoluminescence, has attracted many people to research on it, but its mechanism is not yet clear. It is reasonable to think that similar phenomenon involving bubbles may happen in solid materials, but its opacity prevents researchers to detect such a kind of phenomenon. This paper investigates the change of gas bubbles by transmission electron microscope (TEM), being able to overcome the difficulty of opacity of materials. Thin film samples of pure aluminum are prepared for TEM experiment by jet chemical polishing. The samples are implanted first by deuterium or hydrogen at room temperature using ion accelerator, followed by electron irradiation under 200 kV TEM. Gas bubbles will form in aluminum after ion implantation, and then grow into larger ones or be collapsed under electron irradiation. Electron diffraction rings of polycrystals appear together with the change of gas bubbles. This kind of diffraction rings of polycrystals could be observed both in deuterium-implanted and hydrogen-implanted aluminum, but would never be found in the case of electron irradiation on the aluminum without implantation of hydrogen or deuterium. The polycrystals of aluminum are not due to the heating effect of electron beam, even electron beam could make a hole in the film sample finally. For the sample of aluminum containing no hydrogen or deuterium, only dislocation loops can be observed during electron irradiation. It may be that a kind of heat emission occurs when the gas bubbles are irradiated by electron beams, but the heat emission would not be due to deuterium fusion reaction because the electron beam-induced polycrystals occur not only in deuterium case, but also in hydrogen case, indicating that the implanted deuterium is not the necessary condition for heat emission. In addition, the energy dispersive spectrometer in TEM is used to detect the possible unique X-ray signals, but none of any special peak below 40 keV in the X-ray spectrum can be found. The plasmatization of gas in the bubbles under electron beam irradiation is used to try to explain the mechanism of such heat emission.
Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
Title: The change of microstructure in deuteron-implanted aluminum under electron irradiation
Description:
As known for a long time, bubbles in liquid would emit light under ultrasonic waves.
This experiment, called sonoluminescence, has attracted many people to research on it, but its mechanism is not yet clear.
It is reasonable to think that similar phenomenon involving bubbles may happen in solid materials, but its opacity prevents researchers to detect such a kind of phenomenon.
This paper investigates the change of gas bubbles by transmission electron microscope (TEM), being able to overcome the difficulty of opacity of materials.
Thin film samples of pure aluminum are prepared for TEM experiment by jet chemical polishing.
The samples are implanted first by deuterium or hydrogen at room temperature using ion accelerator, followed by electron irradiation under 200 kV TEM.
Gas bubbles will form in aluminum after ion implantation, and then grow into larger ones or be collapsed under electron irradiation.
Electron diffraction rings of polycrystals appear together with the change of gas bubbles.
This kind of diffraction rings of polycrystals could be observed both in deuterium-implanted and hydrogen-implanted aluminum, but would never be found in the case of electron irradiation on the aluminum without implantation of hydrogen or deuterium.
The polycrystals of aluminum are not due to the heating effect of electron beam, even electron beam could make a hole in the film sample finally.
For the sample of aluminum containing no hydrogen or deuterium, only dislocation loops can be observed during electron irradiation.
It may be that a kind of heat emission occurs when the gas bubbles are irradiated by electron beams, but the heat emission would not be due to deuterium fusion reaction because the electron beam-induced polycrystals occur not only in deuterium case, but also in hydrogen case, indicating that the implanted deuterium is not the necessary condition for heat emission.
In addition, the energy dispersive spectrometer in TEM is used to detect the possible unique X-ray signals, but none of any special peak below 40 keV in the X-ray spectrum can be found.
The plasmatization of gas in the bubbles under electron beam irradiation is used to try to explain the mechanism of such heat emission.

Related Results

Effects of helium and deuterium on irradiation damage in pure iron
Effects of helium and deuterium on irradiation damage in pure iron
Productions of transmute elements (hydrogen and helium) have great influences on the resistance to irradiation damage in structural materials for fusion reactor. The evolution of i...
Ceramic Coatings for Aluminum Engine Blocks
Ceramic Coatings for Aluminum Engine Blocks
<div class="htmlview paragraph">The trend toward lighter vehicles for improved performance has recently introduced the use of aluminum and plastic materials for vehicle bodie...
INTERAKSI BAHAN BAKAR U3Si2-Al DENGAN KELONGSONG AlMg2 PADA ELEMEN BAKAR SILISIDA TMU 2,96 gU/cm3 PASCA IRADIASI
INTERAKSI BAHAN BAKAR U3Si2-Al DENGAN KELONGSONG AlMg2 PADA ELEMEN BAKAR SILISIDA TMU 2,96 gU/cm3 PASCA IRADIASI
INTERAKSI BAHAN BAKAR U3Si2-Al DENGAN KELONGSONG AlMg2 PADA ELEMEN BAKAR SILISIDA TMU 2,96 gU/cm3 PASCA IRADIASI. Telah dilakukan analisis interaksi bahan bakar U3Si2-Al dengan kel...
The influence of nanostructure formation on properties for Cr implanted PET
The influence of nanostructure formation on properties for Cr implanted PET
ABSTRACTPolyethylene terephthalate (PET) has been modified by Cr ion implantation with a dose range from 1×1016to 2×1017ions /cm2 using a metal vapor vacuum arc MEVVA source. The s...
Light Weight Aluminum Cartridge Case Design for IED’s Application - ANSYS
Light Weight Aluminum Cartridge Case Design for IED’s Application - ANSYS
This paper describes the design analysis of the aluminum cartridge case, its testing, Analytical Simulation (ANSYS) and evaluation against Improvised Explosive Devices (IEDs) appli...
Magnesium Heat Sink Evaluations
Magnesium Heat Sink Evaluations
<div class="htmlview paragraph">A system has been constructed to estimate heat dissipated from geometrically identical heat sinks and pinfins extruded from magnesium (M1A) an...
Climate and Culture
Climate and Culture
Climate is, presently, a heatedly discussed topic. Concerns about the environmental, economic, political and social consequences of climate change are of central interest in academ...

Back to Top