Toward scalable perovskite‐based multijunction solar modules

AbstractPerovskite‐based multijunction solar cells can potentially overcome the power conversion efficiency (PCE) limits of established solar cell technologies. The technology combines high‐efficiency perovskite top solar cells with crystalline silicon (c‐Si) and copper indium gallium diselenide (CIGS) single‐junction solar cells enabling a more efficient harnessing of solar energy. In this work, we present high‐efficiency and scalable perovskite‐CIGS and perovskite‐Si multijunction solar modules in a four‐terminal configuration. We design the multijunction solar modules for minimal optical losses through careful optical engineering. In addition to optimized light coupling, the solar modules are fabricated in a scalable device design. Starting from lab‐scale cells of 0.13 cm2, we scale up the multijunction devices by two orders of magnitude to 16 cm2 and investigate the various losses affecting the PCE of large‐area multijunction solar modules, thus providing valuable insights into scalability of the technology. The champion perovskite‐CIGS and perovskite‐Si multijunction solar modules exhibit higher PCE than the stand‐alone devices on sizes up 16 cm2, paving the way for high‐effiency perovskite‐based multijunction photovoltaics. This work brings to forth relevant upscaling aspects of perovskite‐based multijunction solar cell technology, which is a key milestone in the road to commercial feasibility of the perovskite‐based multijunction solar cell technology.