Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Effect of laser remelting on microstructure and properties of two Ni-base coatings by supersonic particles deposition
View through CrossRef
Abstract
Remelting treatment of In718 and In625 coatings deposited by supersonic particles were conducted by using laser technology. The microstructure, phase composition, microhardness, wear resistance and corrosion of the coating before and after remelting were studied. The results showed that defects such as voids and cracks of the deposited coating were eliminated by laser remelting treatment, the microstructure of the coating became compact and uniform and the bonding mode changed from mechanical bonding to metallurgical bonding. The deposited coating consisted of γ-Ni solid solution and Fe3Ni2 intermetallic compound phase, remelting to form a new phase Ni3(Al,Ti) and high hard phase carbide (Nb,Mo) C. The average microhardness of the remelted coating was 6.96 GPa, which was 1.72 times than that of the deposited coating. The wear resistance of remelting coating was significantly better than that of deposited coating and substrate, and its wear form was mainly abrasive wear. The corrosion resistance of the coating was significantly improved after remelting treatment.
Title: Effect of laser remelting on microstructure and properties of two Ni-base coatings by supersonic particles deposition
Description:
Abstract
Remelting treatment of In718 and In625 coatings deposited by supersonic particles were conducted by using laser technology.
The microstructure, phase composition, microhardness, wear resistance and corrosion of the coating before and after remelting were studied.
The results showed that defects such as voids and cracks of the deposited coating were eliminated by laser remelting treatment, the microstructure of the coating became compact and uniform and the bonding mode changed from mechanical bonding to metallurgical bonding.
The deposited coating consisted of γ-Ni solid solution and Fe3Ni2 intermetallic compound phase, remelting to form a new phase Ni3(Al,Ti) and high hard phase carbide (Nb,Mo) C.
The average microhardness of the remelted coating was 6.
96 GPa, which was 1.
72 times than that of the deposited coating.
The wear resistance of remelting coating was significantly better than that of deposited coating and substrate, and its wear form was mainly abrasive wear.
The corrosion resistance of the coating was significantly improved after remelting treatment.
Related Results
Laser Cladded Surface Hardening Coating With Gradient of Mechanical Properties
Laser Cladded Surface Hardening Coating With Gradient of Mechanical Properties
The present dissertation “Laser Cladded Surface Hardening Coating with Gradient of Mechanical Properties” is devoted to the research of laser cladding process for obtaining high qu...
Supersonic Shrouding Methane Mixtures for Supersonic Combustion Coherent Jets
Supersonic Shrouding Methane Mixtures for Supersonic Combustion Coherent Jets
A coherent jet oxygen supply plays a key role in the process of electric arc furnace steelmaking: it provides the necessary oxygen for the smelting of molten steel and promotes the...
PROTECTIVE ABILITY OF TIN-NICKEL COATINGS
PROTECTIVE ABILITY OF TIN-NICKEL COATINGS
The calculation of the corrosion current of the steel – plating allowed us to estimate the protective properties and the porosity of the Tin-Nickel coatings. Measured in 3% NaCl so...
Desarrollo y optimización de recubrimientos HVOF base WC-CoCr para aplicaciones aeronáuticas
Desarrollo y optimización de recubrimientos HVOF base WC-CoCr para aplicaciones aeronáuticas
Material engineering has always played a defining role in industry by improving materials and tribological properties, increasing lite time use and thus ultimately reducing materi...
A Review on Properties of Electrodeposited Nickel Composite Coatings: Ni-Al2O3, Ni-SiC, Ni-ZrO2, Ni-TiO2 and Ni-WC
A Review on Properties of Electrodeposited Nickel Composite Coatings: Ni-Al2O3, Ni-SiC, Ni-ZrO2, Ni-TiO2 and Ni-WC
Nickel electrodeposition is a widely utilized method for creating thin films on various substrates with various desirable attributes. Recently, there has been a growing interest in...
Properties of Electrodeposited Nickel Composite Coatings: Ni-Al2O3, Ni-SiC, Ni-ZrO2, Ni-TiO2 and Ni-WC
Properties of Electrodeposited Nickel Composite Coatings: Ni-Al2O3, Ni-SiC, Ni-ZrO2, Ni-TiO2 and Ni-WC
Nickel electrodeposition is a widely utilized method for creating thin films on various substrates with various desirable attributes. Recently, there has been a growing interest in...
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
In recent years, more than 90% of the signal laser power can be up-converted based on the high-efficiency double resonant external cavity sum-frequency generation (SFG), especially...
Constraining the origins of terrestrial stratospheric solid aerosols over the 1981-2020 period
Constraining the origins of terrestrial stratospheric solid aerosols over the 1981-2020 period
MotivationThe injection of materials into the Earth's atmosphere has both a natural and an anthropogenic component. Natural solid aerosols that reach the stratosphere can come from...