Study of Fabrication Process and Performance Analysis of the CDS/CDTE Based Photovoltaic Cell

Fabrication of CDS/CDTE based heterojunction photovoltaic cell has been undertaken to explore better light conversion efficiency. We have developed a photovoltaic cell using glass coated with Indium doped Tin Oxide (ITO) which works as transparent conducting oxide (TCO). ITO coated glass has promising prospects of enhancing the efficiency of the photovoltaic cell. ITO layers are known to be employed as anode terminal due to the negative polarity they possess compared to the whole PV cell; here, we have employed it for the same function as the front layer. During fabrication of the photovoltaic cell, the deposition of nanoparticles of CDS and CDTE layer is undertaken through doctor-blade method. We have employed pure CDS as window layer for its high band gap of 3.8 eV (particle size: 8 nm) and CDTE as absorber layer due to its high optical absorption coefficient with high mobility, good carrier lifetime and enhanced crystallographic properties. The CDS window layer and CDTE absorber layer together constitute a p-n junction where the CDS window layer captures high intensity photons and transmits the photo-excited electron to CDTE absorber layer, thereby leading to photo-current output, which serves as a base to explore and test its further applications. To obtain band gap of respective CDTE and CDS nanoparticles, optical characterization is used. Silver paste is used as rear contact to form anode terminal having good conductivity and providing better mechanical support to the photovoltaic cell.