Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Proposed Testing Quality Of Silicon Nitride In Nuclear Application By Ceramography

View through CrossRef
<p class="NoSpacing1">The components in nuclear  application should ensure the safety during operation. Testing and investigation should be performed to ensure the quality of every component. This report propose ceramography technique for testing of silicon nitride in nuclear application. Ceramic material is known brittle therefore not possible to hold by using vice as usual used in metal during cutting. Since ceramic is very hard, the cost for cutting, grinding and polishing required high cost due to utilization of diamond. Special techniques should be employed during observation bay using optical microscope because ceramic are not reflect the light. Ceramic is mainly known since their high chemical resistance therefore difficult to etching by using chemical solution. A unique respond of ceramic due to indentation make the indentation technique become part of ceramography. Indentation process requires a flat sample in order valid result to be obtained, and this can be achieved by special technique during grinding and polishing. This research introduce of ceramography process that was successfully done on Si<sub>3</sub>N<sub>4</sub>, from preparation of the specimen, microstructure observation, the respond on indentation, strength, and porosity investigation<strong>  </strong> The results showed that the fluorescent dye penetrant under ultra violet source of light the defect in Si<sub>3</sub>N<sub>4</sub> was easily observed therefore is suitable to be proposed as a technique for testing the quality of silicon nitride component in nuclear application.<a href="file:///C:/Users/Mohamad%20Mostafa/Desktop/Knowledge%20E/In%20Press%20Conferences/ICoNETS-2015/Source-Manuscripts/13_I12-Tjokorda_p80-86.docx#_msocom_1">[P1]</a> </p><div><hr align="left" size="1" width="33%" /><div><div><p> <a href="file:///C:/Users/Mohamad%20Mostafa/Desktop/Knowledge%20E/In%20Press%20Conferences/ICoNETS-2015/Source-Manuscripts/13_I12-Tjokorda_p80-86.docx#_msoanchor_1">[P1]</a></p><p>The revised sentence and added</p></div></div></div>
Title: Proposed Testing Quality Of Silicon Nitride In Nuclear Application By Ceramography
Description:
<p class="NoSpacing1">The components in nuclear  application should ensure the safety during operation.
Testing and investigation should be performed to ensure the quality of every component.
This report propose ceramography technique for testing of silicon nitride in nuclear application.
Ceramic material is known brittle therefore not possible to hold by using vice as usual used in metal during cutting.
Since ceramic is very hard, the cost for cutting, grinding and polishing required high cost due to utilization of diamond.
Special techniques should be employed during observation bay using optical microscope because ceramic are not reflect the light.
Ceramic is mainly known since their high chemical resistance therefore difficult to etching by using chemical solution.
A unique respond of ceramic due to indentation make the indentation technique become part of ceramography.
Indentation process requires a flat sample in order valid result to be obtained, and this can be achieved by special technique during grinding and polishing.
This research introduce of ceramography process that was successfully done on Si<sub>3</sub>N<sub>4</sub>, from preparation of the specimen, microstructure observation, the respond on indentation, strength, and porosity investigation<strong>  </strong> The results showed that the fluorescent dye penetrant under ultra violet source of light the defect in Si<sub>3</sub>N<sub>4</sub> was easily observed therefore is suitable to be proposed as a technique for testing the quality of silicon nitride component in nuclear application.
<a href="file:///C:/Users/Mohamad%20Mostafa/Desktop/Knowledge%20E/In%20Press%20Conferences/ICoNETS-2015/Source-Manuscripts/13_I12-Tjokorda_p80-86.
docx#_msocom_1">[P1]</a> </p><div><hr align="left" size="1" width="33%" /><div><div><p> <a href="file:///C:/Users/Mohamad%20Mostafa/Desktop/Knowledge%20E/In%20Press%20Conferences/ICoNETS-2015/Source-Manuscripts/13_I12-Tjokorda_p80-86.
docx#_msoanchor_1">[P1]</a></p><p>The revised sentence and added</p></div></div></div>.

Related Results

ORGANIC SILICON IN THE PRODUCTION OF ITALIAN ZUCCHINI
ORGANIC SILICON IN THE PRODUCTION OF ITALIAN ZUCCHINI
  The use of silicon in several crops has been shown to be beneficial because of its protection in the leaves, reducing the attack of pests and diseases, because of which the...
Nitrides
Nitrides
AbstractNitrides may be classified as being ionic or salt‐like, metallic, nonmetallic (diamond‐like) or volatile. The properties of transition‐metal metallic nitrides and the diamo...
Issues of technology and conditions of smelting of low-silicon cast iron in blast furnaces
Issues of technology and conditions of smelting of low-silicon cast iron in blast furnaces
The issues of technology are considered and the conditions for smelting cast iron with a low silicon content (0.2‒0.3%) in blast furnaces are discussed. The relation between the re...
Implications of the “Nuclear Forces Policy Act” on North Korea’s nuclear strategy
Implications of the “Nuclear Forces Policy Act” on North Korea’s nuclear strategy
Since coming to power, North Korea's Kim Jong-un regime has been upgrading its nuclear forces through four nuclear weapons tests and hundreds of test launches of nuclear weapons de...
Interfacial thermal conductance of gallium nitride/graphene/diamond heterostructure based on molecular dynamics simulation
Interfacial thermal conductance of gallium nitride/graphene/diamond heterostructure based on molecular dynamics simulation
<sec>Gallium nitride chips are widely used in high-frequency and high-power devices. However, thermal management is a serious challenge for gallium nitride devices. To improv...
Recent Advances in Carbon Nitride-Based S-scheme Photocatalysts for Solar Energy Conversion
Recent Advances in Carbon Nitride-Based S-scheme Photocatalysts for Solar Energy Conversion
Energy shortages are a major challenge to the sustainable development of human society, and photocatalytic solar energy conversion is a potential way to alleviate energy problems. ...
Large-area silicon–nitride mask technology for x-ray lithography
Large-area silicon–nitride mask technology for x-ray lithography
This paper describes a technology for making large area silicon-nitride x-ray masks. We did extensive work for optimizing the LPCVD deposition process. Choosing proper deposition p...

Back to Top